mr_crust

Hey all, got myself an autometre boost gauge, now to connect this thing up im getting power from the cigerette lighter, now the vaccum hose im using is the one thats comes in the autometre kit., where do i connect it to in the engine bay..i know its the vaccum hose , but i got no idea which hose that is . anyone got a pic using the standard T peice and hose from autometre, where they connect to..

check my post out in this thread it shows it clearly http://www.skylinesaustralia.com/forums/in...1entry1791571

remove the wheel arch n cut a hole ..if u unscrew the washer bottle , u will c it doesnt interfer with the cooler pipes at all. u only have to relocate a small braket holding a few electrical things to anotehr screw 4 cm back..

i was told i needed to cut them aswell, but i was worried it would out balances the fan.. also a good mechanic i know recommended not to do it, unlike so many people have.. but i managed to fit my kit to tight that i sits over the fan and didnt have to cut the blades at all ..ill get a pic later on

Manuals Here is a site i came across with links to all different aftermarket manuals such as hks,apexi,greedy etc

This was done on an r33, to cut the whole look at the first photo, this is from the drivers side front guard..this is where you should cut the whole. To do this properly use a 76mm (3 Inch)whole saw. Then put a rubber ring inside it, to stop vibrations and to stop it rubbing metal to metal. If you dont have an rubber ring get a piece of electrical wire, strip it and cut the cord in half n put it on the whole Once the whole is cut, make sure u prime it as well so it wont rust

thats the one i purchased..compared to ebay shops charging 250 for the same thing, i think i done alright.. and no rsm comes with the g sensor standard, u gotta buy it as an option. This only adds a few extra options to the rsm, but i might grab one as they are only 50 bux

thanks mate, but that is different to the one i brought ur instructions.. i found the instructions on apexis web site..thanks again paul

hey all, i just got an apexi rsm of ebay and i need instructions to install it since it didnt come with any?? can anyone link me to a manual or something much appreciated

i also saw this r33 driving around yesterday, its looks real nice on the road, and credit to the owner for doing something different. although most ppl by the sounds of it dont like it , but its an awesome effort..i think its unique... btw: to the owner, its blowin heaps of black smoke when u gave it a squirt

the answer is in my PM's thanks to grigor,thanks again mate. And for anyone who wants to know, if you unclip the inner guards u can unclip them from the back, or pry them off from the front from the side closer to the wheel. Cheers

Hey guys, i got another set of side indicators last nite and im gonna use them to make a aliminum frame with clear lenses, becuase i dont wanna play with my good set on the car.. How do u remove the stock ones do u flick them out with a screw driver from the left or right btw, thats not my car in the pic, its the only view i could find with the indicators

well its sounds pretty good from what ive read and DiRTgarage says its decent, so i might pick up one of these things shortly. ill let u know how this thing goes

http://www.2kracing.com/product_info.php/c...roducts_id/3382 Im lookin' at gettin a gtec pro competition, jsut to measure 1/4mile times n reaction times..anyone used one of these... are they any good???

i fitted my cooler over the wkend and i had to undo the two bolts on each side of the re inforcemnet bar n lift it slightly foward to get my cooler to site right... Also to get it in with a stock front bar i had to cut out around the mouldings in the centre (where the actual cooler sits) and under the spot lights/blinkers i cut out a around 80mm out so the piping could run properly and the front bar sits as per factory

Well my cooler n pipes were delievered this afternoon. I was actually shocked how fast it arrived. I got it from JustSR, and i would recommend them highly.Here are a few pics of the cooler n pipes. Anyone know how to get words sprayed onto the cooler? I wanna get my plates sprayed onto it...Is it just done with a stencil n normal spray paint??

if you want i cant make up the het sheilds with lid and all, if anyone is instrest.

ok im writing the instuctions out now for it and ill get u plans for the box exactly so basically u can cut it out and put it straight on. I should be able to undo my one 2nite, if not ill do this on the weekend and shoot you both of a copy..

ill get the plans for u when i get home from work and post them up for u .. thanks for the idea mate, i will be copying it exactly hehe

I own the car in those pics, as for the cold air box i made that myself, ive got the plans for it at home aswell. so i can give u a guide of how to make it btw satanic whats your site? EDIT . i found your site in your profile, thanks

Got a small problem. Im getting my cooler this week and looking at the piping its going to interfer with my snorkol...How have you guys over come this ?? Because i like the way ive got it setup and it works well ??? any ideas would be apprecaited

thanks again guys, i am very appreciative of every's advice and photos, to help make my installation easier. Once i do my kit (i ordered it today) i will install it and make a step by step guide for future reference. thanks again to everyone who helped me out btw damo, the link to the pdf file doesnt work

if u cut the fan blades, will that cause it to be unbalanced? btw thanks for all this pics, they make it so much easier...i really want to c a pic where u cut the whole and run the pipes near the washer bottle if anyone has that.

quick question (sorry if im a pain in the ass) but where u run the cooler pipes under the washer bottle, where do i cut the body of the car, have u got any pics at all? and do you have to relocate the washer bottle?

Thanks Slide and wessa02 for the info, i cant thank you guys enough. once i get my cooler done, ill do a full right up for future reference. Also have guys experience any problems with a larger cooler