too_much_boost

I cant prove either way. You can inspect them and judge for yourself. I have had them sitting in the garage for about 3 years, and the previous owner had them in his garage for 2 years. If you think China was making copy disks in this specific size back then I recommend you go and spend 3k on a set from Japan.

Thanks guys. Ive located some now

I doubt they will work with R33 calipers as they have diffeernt length arms

SOLD

From memory it was St marys brake and clutch. I bought the kit 2nd hand so I'm just going off memory Also pickup only

These are a custom kit from a brake place in Sydney. They arent chinese

Still available

Lots of tyre kickers, but these are still here

Still available

I'm after a pair of R34 GTT rear calipers and brake master cylinder In Sydney Thanks

As topic, I'm looking for a pair of pineapples. I don't need an entire set (unless really cheap) Cheers

Thanks for the reply. I've actually got it sorted now Cheers

I'm after a pair of rear knuckles from a hicas R33 gtst. AFAIK, the knuckles are the parts of the rear subframe assembly that the hubs and control arms bolt to. Also the brake calipers and lower strut mounts bolt to these. I'm assuming i have the right part name Pickup as close to campbelltown, Sydney as possible Cheers

SOLD

Hi Guys I'm looking to replace the rear subframe on my RS4S as mine has some rust. While in the process i'd like to swap to eyelet style rear struts and get rid of hicas Which subframe should I be looking for which will let me maintain the rear track as well as the stock diff? Is S14 the one I should be using?

You have the rear subframe?

Maxxis all round

First in best dressed guys

Still available.

At this stage i'm looking for a Sydney buyer. I dont have time to sort out shipping on something like this. Sorry

You will probably need to trim your front bar, but it is meant to connect to your factory pipes so no cutting of inner guards (i never installed it though)

330mm big brake kit suit S13/14/15/R32/33/34 etc. Comes with alloy hat vented disks, adapters and Z32 calipers. Calipers have been sitting for a while so i'd recommend a seal kit for them. Disks are in excellent condition. Pads not included - $500 NO OFFERS Pickup from Campbelltown, Sydney

I have a set of Jap Longchamp rims for sale 17x8 all round. (+35) offset 114.3 PCD A few inches dish Need a new coat of paint. One as a dent (pictures) that could be knocked out easily. Still holds air $300 no offers Pickup only from Campbelltown, Sydney

Nissan Stagea S1 RWD 140,000km 1996 model RB25DET RWD conversion Auto transmission with Stage 2 MV autos shift kit R34 neo turbo Series 2 stagea fuel pump SAFC tuned at unigroup GAB Coilovers Limited Slip Diff 17in RS4S rims Pioneer CD player with splits S2 Stagea front brakes Water pump and timing belt changed at 120,000km Apexi 3in exhaust with cannon Apexi pod filter Turbotech bleed valve Pivot boost guage In Campbelltown, Sydney $7500

I have an Apexi turnflow front mount intercooler with piping for C34 Cooler dimensions are 500x230x70 Pickup from Campbelltown, Sydney $450