rad100

hey guys, im starting to prep my car for painting. wondering, what sort of bog/filler to use on dents? how hard is it to take out all the windows to spray? any help on what type of satin paint to go? cheers

nitto!!!

got a rough cost on what they all cost?

not sure yet, ill work that out when i come to it.

cheers for the tip.

yep and me!!

just a fun session. and a dyno run

had a track day at mallala monday 11/4/11 engine was amazing, abit laggy but im working on that with vct. 595ss dont do any good for track so they will be ditched for some semi slicks. the guards are gonna get molested more to fit some 245/40/18 semis getting some rear camber arms to bring the camber to closer to 0 my r34gtt brakes wont seem to bleed properly so all day i had very soft and low pedal. any ideas? today i started to strip the body to get ready for respray. and to fix all the dents and to get my guards flared more. and pics of the car today

s14! r33 gtst brakes, little t28, 14psi, fmic, tune, coilovers and semi slicks will give your cracking times for around 10k!

ahh too easy mate, amazing wheels you have..

dont wanna swap for cst hyper zero 1 in 18x9.5 +15 all round with feddy 595's?

all good, got them working with a switch.

hey guys, this probably isnt the right spot but i need a quick answer and this spot get the most hits. issue is i have a track day monday and in the last 12hours, it has started to rain. i dont have working wipers since my rb25 conversion, havent needed them. now my question is. if i run a wire form + terminal to a switch in the cabin then back to the wiper motor and ground the other one will this work until i can get it to an auto elec next week? or being a high, low, int system it wont work? cheers

spoke to paul today. pretty much just gotta bolt the head on!!!

so anyone wanna swing past and grab luke and i from rooty hill on the way to the track fri and sat haha

ok so have the vct for the first run ON all the way through the rev range and work out where its crossing the line with vct off and use that rpm range?

i guess its going to be good to see hwat gains i can actually make once i get vct running. i have purchased a msd digital window switch. so ill run it up, see what it does, turn vct on and run it up and see what it does. then try get boost holding. but like i have said, ive been looking at hub V hubs when comparing.

soooo much hate for hub dynos haha.. either way ANY gain in midrange ill take even if its 10rwkw or 50rwkw. atleast i know my car has been tuned without having to deal with wheelspin im looking at selling my eboost1 for an eboost street as they have aux inputs to be able to control vct.

ill be there again!

yeh rb20 ecu. oh well ill get a switch to get it working.. sorry to hijack.

nah cooler isnt fully empty. ill chuck 5 in and let it run for abit then re-check.

hey, i have for sale/trade a eboost 1. silver in colour, perfect working order. has all the wires, solenoid etc. only changing due to needing the eboost street to run a rpm switch for vct. otherwise i wouldnt be changing. amazing boost controller. for sale for $300 or swaps. cheers

hey all. since my tune and posting my results up i have found that i have a fair bit of lag with my gt3076 .82 i have been told that not running the vct is giving me poor (approx 60rwkw@4000rpm less) midrange power. now i have searched about getting vct working and come across people using there eboost street or a window switch. my question is, what are some ways of getting vct to switch on and off at say 1500rpm and 4500rpm? i have herd of NOS window switch. eboost street (not an option as i have an eboost) jaycar one but apparently doesnt turn back on unless u drop below the 1500rpm again. any ideas. heres my dyno sheet so people can see. mods: built 25 gt3076r .82 stempipe manifold 50mm gate plazmaman tomei poncams e85

anyone know where to get a good rpm switch to turn vct on and off?

hey all, looking at getting a rpm window switch to turn my vct on and off in my r32 rb25. if anyone has one or knows where to get one please let me know!