rad100

anyone know or have a rpm window switch to get my vct working?

eboost 1 controlling it, the wastegate only has a 10psi spring, i have a stiffer one here ready to go on. i dont have vct either.

3076 .82, stempipe mani, 50mm gate. no vct, rb25, nistune, e85

ahhhhh thats why when im comparing its different hahaha.. vct boys.. yeh im going to buy a nos rpm switch. but also going to play around with preload settings on the wastegate once i have fitted the stiffer spring..

shit.. im making 20psi by ~5000rpm.. thats with e85, poncams and stempipe manifold

yeh ive herd more of 5.5-6L just want to "overfill" abit to add extra safety at the track!

sorry to dig up a new thread, im flushing my engine oil. wondering how much to re-fill the oil in there has only done 30 dyno runs as it was used to just flush and clean the engine. i found the norm is 4.5l for the engine, say 500ml for cooler +some for lines. now im taking it to the track monday. so i was told to overfill. how much would i put in? 5.5L? 6L? stock sump btw

oil pump and manifold gone.

r32 w/rb25det forged internals stempipe manifold gt3076r .82 50mm gate plazmaman plenum tomei poncams surge tank 740cc nistune eboost 1 E85 will fit a stiffer spring to hold 22psi flat and make more power. but really wanna try getting the boost on earlier. any ideas?

to be honest we dont know.. pulled the pump back off, pulled the gears out and they were fine, cleaned the PRV and that was fine. pulled checked the oil filter and all the oil cooler lines and they were fine removed the oil cooler and used the standard position oil filter no change chucked some compressed air up the oil galleries whent he sump was off and seemed to push a bit of oil out the pickup. cleaned the sump, pickup and put it back together and its fine?? lol

anyone got 10-20cm of -12 push on hose laying around? cheers

stay with us!

yeh silly me bought everything else to the workshop except the extra spring FML.. hahaha no stress thou.. will be back on the dyno in a couple weeks!

yep his work is amazing.. picked up 30rwkw just with his manifold...

heat shield sold and collected

tune complete! thanks to garage7

Well it should. I know it fits rb26 also. I'm on my phone but try a google?

Yes.

built rb25det. only taken out due to nitto pump

for sale: had for about 2 years, its the fat xbox not slim.. xbox360 console, AV cable, Power adaptor, 1 wireless controller xbox 360 60gb HDD xbox 360 wireless adaptor xbox 360 wireless controller games modern warfare 2 black ops final fantasy 13 transformers war with cybertron fable 2 works perfect, just bought a ps3. $380. hitachi gps, 4inch screen, plays movies and music, built in battery, comes with all cables and stand. $50 sony digital camera, comes with battery, memcard, charger dock. $100 PM me or sms 0433290801

N1 oil pump. approx 5000kms - $100 rb25 side feed injectors, perfect working order - $50 CA18DET coilpacks, were running mint, only removed due to ls1 conversion - $50 rb25 crossover pipe with bov - $50 rb25 top half plenum (bare) - $OFEER rb20/25 highmount manifold, with 38mm gate port underneath - $100 ACL heat sheilding material - $50

N1 oil pump. approx 5000kms - $100 rb25 side feed injectors, perfect working order - $50 CA18DET coilpacks, were running mint, only removed due to ls1 conversion - $50 rb25 crossover pipe with bov - $50 rb25 top half plenum (bare) - $OFEER rb20/25 highmount manifold, with 38mm gate port underneath - $100 ACL heat sheilding material - $50

am i able to grb one tonight or will they be gone? if not i wont come down. because i put my name down originally when this thread was in the sau-sa section..

April fools? coz if not thats devastating