BATMBL

anjoO, Just add the two together and thats the total ($410 for pipe and $360 for cat =$770) Xizor, the split dump & front pipe will give you more power over the cat, so go for this instead if youhave to chose. SS8_Gohan, There may be another GB in the future depending on interest. cheers guys

FLYSLY, All pipes were sent late last week including yours (and so was your cat seperately), so you should expect them each mid this week. cheers

FAT32, They are all made this way already, so if you didnt need the splitter, its a very easy job for an exhaust place to cut it off for you and shave the area. Some will do it for free, others might charge you $10 or so. to All, If you want a CAT as well, PM me with which cat you want along with the pipe and i can do it at the cat GB price. just check the #2 GB for cats and you can make the payment the same time as the pipe. This way i'll send both parts out at the same time in the same packaging. cheers

good to hear you guys are all recieving them on time. with regards to the catco stamp with arrow thats just on the heat shield of the ceramic cats, the metal cats dont have that on there. you can only fit them one way anyway, as the bolt holes wont line up if you got it the wrong way around.

pics of the cats are available on the second post on this thread: http://www.skylinesaustralia.com/forums/in...howtopic=120070 and pic of the r32/33 pipe is available on the below thread (R34 pipe not shown, but is longer then R32/33): http://www.skylinesaustralia.com/forums/in...showtopic=74022 anjoO, which cat were you after for the R34 GTT? I may be able to do the GB price if we can get a round of people because i just finished a cat GB and might just say that i had a few late order and get them at the same price. as far as i can see in the thread, the following want a cat also: anjoO JaiJai mrgilly Xizor jeffworld2 if you can all confirm which type cat you want, i should be able to get you the GB price also if you make the payment same time as the pipe or by end of the week. cheers

they are made to bolt on to the stock turbo all the way to the cat. so if you order the r34 gtt pipe, it will fit your stock turbo and if you were to high flow it later, it will still bolt on then without an issue. ive put your name in the list cheers

payment is best to be made between 2-4 Aug. cheers

As the first post states, i will be in charge of the GB.

nsm034, yes they are 3 inch

hi guys All pipes have now been sent out. Some should recieve them tomorrow, and all the rest will recieve them by early to mid next week depending on where you are located. Thank you to all who participated in the GB and for those that are keen on a second one, i will put up a thread today in the GB section. They will start to get made from today, this way most will be ready to send by the time the payment is due. cheers

hi guys 6 cats were sent out today. the list has been updated, so check if yours was sent. Everyone else will get their cat sent out tomorrow (Thu). All of you should receive your cat either this Fri or next Mon-Wed depending on how long it takes to receive registered post from Sydney. A BIG thank you to all who participated in this GB and due to the success we may have another one soon. cheers guys

items are located in springvale south, melbourne.

i will start another one on friday. but it will be a limit of people this time, otherwise it takes too long for all to recieve their pipes.

hi guys, just an update on the pipes. 3 are being sent tomorrow: STAGE-A siddr20 skyline17 Everyone else's pipes are getting sent on Thursday, and that will be all the remaining people in the GB. Again, i apologise for how long its taken to get them sent out!

you need a H1 kit, but it will be hard to get the bulb to sit into its place because you cant have the adaptor there which would normally keep the bulb into place. Instead you would have to fit it in by making something that will hold it into place. ive had the same issue for my r32, so i got some metal wire and coiled it, then used this to press it against the h1 hid bulb and secure it into the headlight by putting the coiled wire between the gaps where the adaptor would also secure itself to.. the colours i have are mostly 6000K, but sometimes i get 8500K or 6500K if people request them. i dont have any H1 kits left at the moment though.

hi guys, Anyone know where i can adjust the idle on the RB26? A picture of the engine with an arrow pointing to the place would be really good, unless it can be explained easily. i know how to do it on the rb20/rb25, using a screw driver, but cant find it on the rb26.... its currently reving at 1050rpm-1100rpm, i want to put it down to 950rpm. any help is appreciated. cheers

most payments have been made for the cats. for those that havent as yet PM'd me regarding payment details, can you please do this asap. cheers

hi Lee Just spoke with the manufacturer and he is finishing off all the pipes for this GB in the next couple of days. They will get sent out by the end of the week, so you should all recieve them mid next week. I will keep you all informed. Thank you for being all so patient! Jackie, Until all the pipes are sent out in this GB, the second GB wont start. So its likely that #2 will begin next week. cheers

its best to PM me for the details and also provide me your address details at the same time. i will PM you back and give you my account details. cheers

godzl1975, The length from flange to flange is about 315-318mm. (Cant quite get the exact measurement because of the measuring tape curving over the cat). The same bolt on cat is used for R32 and R33 GTST or GTR. cheers

hi Guys First 5 pipes went out today to the following people: Zahos Kozeyekan shif_tea blackbart JaseR33 Next 5 or so will be Fri or Mon at the latest. cheers

no H3 HID kits left, sorry mate. The r32's are the worst with halogen lights, hid kits are a must on these cars, especially if you dont drive on areas with well lit roads...

hi guys As mentioned, im after a stock computer for an R32 GTR. Please quote price in thread and if you are not in Melbourne, include price with postage. cheers, Michael

hi guys The #2 GB thread is out. The GB will end 19 July. Please confirm your interest there. i have put some names down already from people who expressed their interest. can you please confirm in new thread if still interested etc. cheers, Michael

I'll be running the GB, so all enquiries/PMs can go straight to me!