Jump to content
SAU Community

=premo=

Members
  • Posts

    918
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by =premo=

  1. Thinking about selling my RB30/26det, its currently in an R32 gts-t four door and making 465hp at the wheels. I've spent a lot of time and money on this car but I don't get time to use it and I'm not dedicated enough to take it to the track anymore. If I use it on the track I'm spending time and money that would be better spent with my 1.5year old and 1 month old girls. However I absolutely love this car, driving it is like nothing else I've experienced. Engine had a freshen up about a month ago when I pulled it out to put tomei oil pump and head oil drain on. Would like $20k for the whole lot but I'd like to hear offers too 1989 R32 Gts-t -RB30 Crank -Precision Rods -ARP rod bolts -ACL race bearings -ARIAS forged pistons -Tomei oil pump -Jun crank collar -4 layer MLSR steel head gasket (could be wrong about brand cant remember) -1mm head oil restriction and one blocked off -std GTR cams -1inch custom head oil drain -Head ported by Darren at Lewis Engines -Modified larger sump with head oil drain and catch can inlets -T04z turbo -Trust high mount manifold -Trust waste gate -Greddy Y intake -std GTR plenum, inlet manifold and throttle bodies -800cc SARD injectors -Malpasi fuel reg -GTR engine wiring loom (modified to suit car) -Power FC D-jetro (maps sensors, GTR plug ecu) -alloy radiator -FMIC with 3 inch custom piping -4 liter custom catch can -Rear mount battery -R33 5 speed -5 puk clutch -Custom one piece tail shaft -Kazz 2-way diff -HSD coil overs -Shortened front upper control arms -Adjustable caster rods -R33 GTR V-Spec front rotors -Alloy pineapples -Drift Teks 17x9.5 +15 -Nicely streched rear gaurds -Hicas lock bar (lines removed) -Nismo or better fuel pump (cant remember again sorry) -Nardi stering wheel -Cobra bucket seats -Drivers Harness -Hydrolic handbrake Probably left a few things out. Also have some spares like 25mm spacers and a few wheels like 16's and 17's although some wont fit over the bigger front brakes. Paints not the best but no rust or damage just not matched properly from where the guards have been done and boot holes fixed. I will try and take new pics if I get around to cleaning it. Only pics I have are from back when I drifted it with the RB20. Haven't drifted the RB30 yet but I might if I find some friends to go to a drift practice with. Car can be registered and has been till early this year however there are some things to be aware of with registering a vehicle with an engine like this. Thanks people
  2. Head oil drain as said but you might as well do that next time once the N1 pump breaks. haha
  3. Just put a tomei pump on my RB, I was told that I needed to take out the inner spring because it would make too much pressure so I have done. My gauges aren't the best but I seem to have double the pressure I should and it seems to spike off the gauge (150+psi) if I give it a quick 1000rpm jab. Does anyone have a guide on how I should have the springs/shims set to lower the pressure or to make sure I have it set right? Thank you
  4. No recent pics of car sorry, will post some soon. Car has SA rego and is complied to Australian ADR's. Car registration is for stock RB20det not the RB30/26.
  5. Open to offers But so it doesn't get removed $10k engine $14k engine package $20k full car Car is 89 Gts-t R32 four door, hsd coil overs, shortened upper control arms, caster rods, alloy sub frame bushes, streched rear guards, 17x9.5+15 drift teks, full good condition interior, cobra reclining bucket seats n bride rails, alpine headunit, gauges, hydrolic hand brake, R33 GTR V-spec front rotors, rear mount battery, 3.5inch exhaust (apexi N1 cat back).
  6. How much for passenger GTST front guard?
  7. I'm going to have two under 2 year old's running around soon and thinking that my time is better spent with them. Also the lack of space for a work vehicle, wife's car and performance car/trailor is getting a bit annoying. But for now I just want to know if there is a market for selling a package like this or if I'm better off selling it in the R32. Engine makes 323rwkw's @ 16psi Turbo is T04z on trust manifold, wastegate and intake Ported RB26 head Aeries pistons H-beam rods (think spool, cant remember) JUN crank collar Head oil feed restriction ACL rings bearings Stock RB26 cams Adjustable cam gears Stock GTR plenum manifold and throttlebodies Power FC D-jetro (duel map sensors) 800cc SARD injectors GTR engine wiring loom R33 5speed gearbox Custom sump (bigger capacity) Exceedy 5puc clutch RB25 engine fan etc Other parts like AVC-R boost controller, intercooler and plumbing, alloy radiator, one piece tail shaft, kaaz 2way and the rest of the car are negotiable extras. Engine has done less than 1000km's since build and has a safe rich tune. I'd like to see figures between $10-$20k before I commit to selling up. Thanks, Daniel
  8. wrong section
  9. How much for tomei oil pump? PM please, Thanks, Daniel
  10. Hi people, I'm sick of worrying about getting defected so I'd like to get a stock front bar, stock rear mufler and R33 GTR wheels as soon as possible. Prices negotiable can pick up in SE Queensland or pay postage. Thanks, Daniel
  11. got anymore? PM please
  12. cant believe no one has stock parts
  13. Thanks for the offer but I'm only after stock parts, trying to make my car look stock. Cheers
  14. You should go to Japanese Parts and Performance on Ashmore Rd, Molendinar http://www.japaneseperformance.com.au/index.php
  15. Thanks mate but I'm not looking for swap, I'm keeping my exhaust, I just need a stock cannon with all the mount bits so I can make it look original
  16. Hi people as title and sig, I'm trying to make my car look a little neater so I'm after R33 GTR rims, any stock R32 front bar (GTR, Gts-t) and a R32 cat back exhaust so I can make it look original ish. Thanks people, Daniel
  17. Dang missed out on another front bar
  18. Hi mate, do you have a stock cat back exhaust for sale? PM please Thanks, Daniel
  19. I need a set as my HSD coil overs cant take the screwdriver and hammer much longer. I don't mind paying postage. Thanks, Daniel
  20. I have a pair of these (Series II) and they are great seats, well worth the money.
  21. Sold, sorry for late update
×
×
  • Create New...