Rowdyr32

Now people have seen it show us.

I don't get drag racing or cruising around a track at 20kmh or doing skids or polishing my car so its like a mirror throughout. Simple minded events for simple minded people. I respect the old school guys who build there own car with thier own hands but from what I've seen a lot of the new generation are a bit simple minded. Watching Gasolene some bloke spent over $500k to only make 1800rwkw in a commodore to win a $50 dyno trophy and he didn't even work on the car it was all at a workshop. Where is the satisfaction in that. The fact is they couldn't afford mags for the rear. They can now ditch there stockies and put some stolen mags on the back like thier stolen mags on the front. They might riot at pedders next so they can get some springs for the back of there cars too. Next a performance shop so they can get the power to spin more than stockies with 50psi in them. Also those rat kids fight like they riot. One mouths off with a heap of mate behind him and then they all jump in do the damage and then run off like pussies. We pay taxes and some goes to the police. Why did they leave? I believe this is one of the main reasons there employed. A big group of pisses bogans and muzzas standing around for a few hours. Did they leave to prove a point to the governmant that they need more funding? Prob wouldn't have stopped the shop getting trashed anyway. Just saved thier cars from cowards throwing bottles at them. Just said on the news the cops are trawling through facebook to try and link faces to the event.

Just found a r33 gtr front diff centre and a gtr dash cluster.

If yours is slipping just change the oil? Common problem if it is.

Just seems like the way my old 32 gtst always ran. Mates one does it aswell. It ran really rich/retarded until right on when the water temp reached middle of the gauge, then it surged and then ran fine after that when it was warm.

I'm not wrecking a car mate. Its just a heap of stuff I had lying around. Sorry no guards. Getting out of cars after 10 years of skylines.

I have a HKS VPC. It allows a gtr to run without afm's and can be adjusted/tuned. Removed from a running car and sat in my shed since. These retailed for about 2k. I'd be looking for $350.

One g-sensor is still available. One of Duncans matge was meant to get it last week but never called. Pm'd

Bump for weekend

Yes there gtr parts off a R32. GTST's didn't come with 26's.

One G-Sensor is sold One G-Sensor is awaiting payment and pickup Std exhaust, balancer and twin turbo pipe awaiting payment and pickup. Yeh $100 is cheap but I never mentioned they were programmable. Sorry only have some std front pipes. No lights mate or vent. The limiter isn't disabled but might be set between 8500-9000rpm. Speed limiter is def disabled. They would run on your engine fine. The springs are a set and came off some teins that use the larger/std size top hats with the smaller diametre bottom for adjustable height shocks. Came off a R32 gtr but should fit pretty much any shock or car with that style shock.

There just std looking ecu's with Mines and Blitz ecu stickers on them. They're definantely chipped.

Wouldn't spend much as a flywheel is worth nothing as there the same as 20's I think plus they explode and a clutch is only around $250 new. Pm me with what you want for it. Got One pm replied.

I'll get some pics of the exhaust this weekend

I have the cradle with the pumps. I'll pm you

I'm down near Frankston. I've run out of internet usage at my house so won't be on here much until 15th unless I'm at my folks.

There for std injectors with the normal mods - exhaust and a bit of boost. I have run all of these and they run fine. Don't have any dyno results for them compared to stock but I did look at the fuel and timing map on them and it was std bottom end of map with a fair bit of timing and fuel taken out of the top where you don't want it after adding a little boost.

De-cat pipe is to suit the exhaust. Prob won't go between a std style front pipe and exhaust. Might be a bit long. Its just a bit of pipe with 2 flanges welded on. No need for pick. Re- clutch/flywheel. Might be interested. Depends on price. Don't need it to bad but its a bit of a pain when I have to take off with my boat on when stopped on hills or at the ramp with the tripple plate in it. Pm me with a price. It'll just mean I can't give the car to much of a hard time as I've seen a few std flywheels explode.

Help me get my shed back in order. Need to fund a new wakeboard! HKS VPC. Come with everything. Use this to remove your AFM's on your gtr and still run std or pfc ecu $400 Set of front guard liners and front under tray. Has front brake ducts and I won't seperate. $250 Getting very rare! RB26DETT oil pump $80 Harmonic balancer $50 R32 GTR fuel pump in cradle $80 each. I have two of these. Twin Turbo pipe - From turbo's to intercooler pipe $100 R32 3inch exhaust with seperate de-cat pipe. Has centre muffler, no rear muffler, just straight throught to out back $100 Standard R32gtst exhaust I used to clear epa on gtr $100 R32 GTR metal fuel cap $30 R32 GTR ABS mater cylinder $100 R32 GTR G-Sensors $100 Qty 2 All ECU's below suit std injectors and turbos 2x Mines ECU's for R32 GTR $100 each Blitz ECU for R32 GTR $100 New R/H sill panel $100 Suit GTR/GTST R/H tail light $30 R/H mirror $25 R33 GTR lowered rear springs for std style shocks $50 sits very nice Tein stiff springs. Perfect for drift. $30 Melbourne Can post. Please no time wasters. You know who you are! This will all end up on ebay if its still around in a few weeks so I thought I'd give the SAU crew first dibs. Looking for a std boost solenoid, flywheel and clutch and intercooler for R32 GTR.

I had to make my own for my GTR. Worth it in the end and gets a few wierd looks.

The threads are stripped. Not threaded. Just a heads up and a pet hate saying of mine. Any place should be able to heli coil it or you could try loctite hydraulic sealant or similar and do it yourself if you haven't pulled all of the threads out of the radiator. Teflon tape is really only good for plumbers. There are a lot better products out there.

Only problem with holding a car to try and get a higher price is it depriciates more and more the longer you hold it. I've knocked back low ballers before only to sell the car for the price they offered 3-4 months later to somebody else. These day I just sell them for what I can get. The only prob with a R34 gtt if you want low 20's is your in the price range of R33 gtr's with 7-10k mods included on it. I know what I'd buy. I think you'll find like the other guys have mentioned. Its worth a lot less than your hoping. Skylines aren't worth much these days. As Ash said - Sell off all the mods seperate. Only way to go!

Good thing with RB series motors is you can measure the stroke through the spark plug holes.

Some pfc's do it on cruise. Feels like a cough. Not pulsing though. It can suposidly be stopped by turning the o2 sensors off. Just a different avenue to maybe look at.

If your not tracking the car your not going to get enough down force to dint boot. I have an old vt v8 supercar wing on mine and it has put a couple deep dints in the back of the boot from Phillip Island and Eastern Creek. Also interested to see how people have stiffened the boot lid.