Zahos

hahaha, i had the same problem once take out the water reserve for the wipers (located behind drivers side headlight), and you will see 2 hoses at the bottom connected to 2 seperate little pumps. just swap the hoses around and she will be sweet. Zahos

bump. still no pics, cant find the time

could be lots of things if they are related, you might have a leak somewhere in your intake hoses. if seperate it could be an ignition/spark issue + a boost controller issue You should check all intake hoses/pipes, and all hoses on your plenum to see if they are loose, disconnected or cracked. This is a good place to start.

I thought Japan uses PAL?

bump. still no pics, cant find the time

This unit would also be a good option if u wanted to watch TV

does it have ABS? All cars with ABS feel like they are falling apart when it kicks in.

It's the valves from this article plus a check valve (one way valve) plus all hoses and fitings (barbed fittings and clamps) plus 2 small brackets to hold the valves and it is ready assembled I will try to take pics this weekend of it.

bump

bump

I bought those tires from North end tires (second hand - there is a thread about these guys somewhere), for $90 a pop (225/50 R16) 2 had 100% tread, and the other 2 had 99% tread. They were great tires, had plenty of grip, but didn't last very long - about 18 months I think (everyday driving - no burnouts either). Could have mde them last 2 years if got a wheel alignment. Anyhow, back on track.... I think those guys import them second hand from Germany, so I dont see an issue (besides maybe the cost of getting them here). Good luck

Just thought I would shed some light on shipping prices via aus post: I once sent a font pipe + dump (stainless steel) from melb to sydney for $10 at aus post. Today I sent an in-dash TV weighing about 4 - 5kg (and the box was twice the size of the TV b/c of the antennas) from melb to perth for $15 via normal post. If you roll up the mats and put them in a box, I dont see it costing more than $15 to send. Zahos

bump

Sold to SeriesIIGTST

no point really, just go to enzed or Pirtek and they should have one in stock for you. just get any check valve that has a cracking pressure of about 3 psi or less. (1psi or less is more favourable).

no thanks you can have it for $100 pickup if you like

no thanks you can have it for $100 pickup if you like

bump have a read through this thread if you need more convincing

bump

bump

bump have a read through this thread if you need more convincing

bump

bump

A, but if they beeped to pass me, then D

bump