FATAZZ

stop in Sydney too!

how fast do you think the car was going on impact? i ask because i noticed some people cut that metal bar behind the front bumper to fit their fmic's(so i've read on here anyway)

a silver 33gtst came bootin up along side me on Doonside rd around 6:15pm

i think i have plugged something in around the wrong way maybe. any info or pics would be much appreciated.

k,i got $120 connections for the new lines,r33 turbo is on now i have a manual boost controller(T-piece thing) took it for a spin, hit over 20psi so i turned it down. also noticed it now runs heaps rough(like an old v8) will it idle normal when i get a SAFC and get it tuned? also i noticed the last bolt for my exhaust manifold is missing. Now ive turned it down so far it only boosts to 5psi in first gear at 5000rpm, then easy makes 15psi in 2nd at about 4500-5000rpm. automatic r34smic 3"dump/frontpipe 3"highflow cat 3 1/2" fromt cat-back. im using a rb20turbo actuator aswell,should i try removing the T-piece boost controller? the hose from my actuator runs to the T-piece then to the compressor housing. is that right?

Item: Rb20 turbo Location:Sydney Item Condition: bit of play plus some oil floating around inside my intercooler pipes,so yeah. Reason for Selling: RB25 turbo is finally on Price and Payment Conditions: $50 pick up only Extra Info: its off a series 1 89' rb20det. 16V 10 stamped on the compressor wheel. Contact Details: 0410531540

i was coming out of boltmaster and seen you then heard you give it a abit *hoped* and you deliverd. sounded lovely Do it again!

MSp-25T ripping 2nd out of HITMAN about 5mins ago,sounded nice.

only -/+ 1 degree hey,cool i thought it would be much more cause it sure feels like it sometimes. no i dont want my guard 1.5inch over the rear wheels. what i was saying is there already is a 1.5inch gap between the tyre and guard that i want to close up. havent found a conclusion about removal of HICAS in a 32gtst as yet

looking to lower my 32gtst,but im worried if its too low my tyres/rims will hit my gaurds when HICAS is involved. how far do the rear wheels actually move? 18x9 265's are my wheels.Theres still 1 1/2" of clearance from gaurd to top of tyre but id like to have the guard sitting over the top of the tyre. opinions please...

what about ignition? will the gear shifts still be the same?

they do it in the gear which is closest to a 1:1 ratio. so im told. they did mine in 3rd(left Overdrive off) IMO that PSI reading is weird mine goes straight up to what its set using a $22 controller. doesnt fade off untill 5,500-6000rpms

yellow r32 gtst with front bar in primer on the great western around 5:30pm-6ish yesterday arvo. and a black gtst IGR-32T same road opposite direction thisarvo.

are the oil and water lines from the turbo for sale?

anyone?

are just the lines for sale? how much?

u can modify the rb20 pipe to fit. do you have spare water lines?

are you in sydney? i prefer to buy both if you have them. $20 each?

water and oil lines from standard turbo? location?

im interested too, mine says 45V2 and the compressor wheel is in pairs.

spotted a grey r32 gtst(i think) in the coulder-sac near my work today,gold wheels i think just the stockers painted gold,still looked the part. #plate was ARY-56 sumthing i think. and FATR31,do you still work near Race Solutions? Oh and 4DZILA,,its a black xr6 turbo looks good.

do you have the original oil and water lines from the turbo?

so how much time do they give you?(as in days?) cops are the nerds who got picked on in school. especially Quakers Hill cops, they blow goats.

bump,,,someone has got to have these lying around.

do you have a limited amount of time between being issued the defect(by the cop) and having to report to the EPA(where you get it cleared)?