ossie_21

I'll give you $50 picked up, as long as it isn't the ricey kind haha. I've seen the price these go for on ebay, this is about fair for the scale of it.

Kwinana Motorplex on Saturday afternoon/night.

Will probably head down for a look after work, haven't been there in aaaaaggggggeeeeeeeessssssssss.

This is a good whinging thread haha . Agree with that merging thing, cars love to get in front if they are side by side, and even if the car in front of both is on their side, they will still speed up & screw up the rotation. Watch Friday for this part, the way Chris Tucker describes rotation sums it up perfectly. Anyway, another thing that pisses me off is people on a packed freeway who will still change lanes without much caution 10 times, getting as far ahead as possible, when really they do that & they only end up 5 cars in front all the way up the freeway. I see this most days, and at Hepburn ave where it goes to from 3 to 2 lanes, & the 2 left lanes merge, if they are in that lane & I am the right I just pass them & smile = . They are all rush rush rush, when they might make a couple of minutes up at the very most, when all they need to do is take care & not crash into someone!!!! Okay that's enough outta me.

I have one, just not installed yet, but I do want to find out what the deal with them is. Here in WA the laws aren't the same, but I don't think there is a problem. Sometimes it would just be better to leave the car straight away instead of sitting in it a few minutes, it's really only when you are caning the car that you need to leave it for more than that.

I set my vcr for this but the damn thing didn't tape (I think someone turned it on ), so if someone would be able to let me borrow it it would be appreciated!!!

What pisses me off the most about the freeway is that if people did actually do 100, traffic would be a lot smoother. I work usually 6-1:30/2:30, traffic obviously isn't a problem. I have tafe on Wednesday where I start at 8, so am on the freeway at about 7ish. There is an amount of traffic where everyone can be doing 100 no problem, but because there are a few other cars around people panic & do 70/80, slowing the traffic down. This has a domino effect & soon the whole freeway is slowing down & filling up, getting worse as it gets to peak hour. The way I see it the sooner you are off the freeway the better it will be. That's why raising the speed limit would help a fair bit. Peak hour will never change, but when it takes about an hour for a 40-min trip it's bs.

All good for Topaz then.

Put it on for a few minutes to see what was happening, that show is utter crap. She drives a line, she's ok I guess. CJ would get it though.

Mikey check your cooler thread in the for sale section, I might be able to help you out. I know this is off topic, sorry.

Just a question, Steve when is the next round????? And second, will it be another open comp like this????? Want to get my car out there is all.

I have the stock 33 cooler & the standard top pipe, as well as a few brackets etc that bolted it all up. Installed my fmic last week & everything I took off I put in the box that is still sitting in my boot. Sounds like you're sorted otherwise send me a pm.

Just let it be a lesson to you to take more care, especially with other cars around. Any damage???? Couldn't make this one due to work, the next one will be a night cruise so I will make sure I'm there. Still don't know anyone from here yet, if someone looks a little lost it's me hahaha

I installed mine last Tuesday, t'd the same line & I don't have a problem....I don't have an a/m boost guage but there has been nothing different. Boost comes on faster, but not over boosting. Did you use the hose that came with the kit to run it back?????? The same thread we posted in, one guy said not to use that line for some reason & he used a different one, said he would post a pic but didn't. But a couple of guys said that's what they've done & no problems. I have to check with someone to make sure it is ok, but the upside is if it is wrong you should just need to replace the cut hose & connect to the right one.

Ah, I noticed when I looked into your engine bay in the break, I was like wtf, it's stock & he's caning the shit out of it! Nice strut brace though. Were you one of the cars that spun out 3 times in the one corner at the end of the straight??? A grey s13 did it, and there was one more but I can't remember which car it was. The third time was a 360 degree spin over the grass at the esses hahaha I want to get my 33 out there next time, just need to get the tower bolts off to fit the strut brace before I get sideways too much. Already have the mechanical lsd & Kei Office suspension, so I'm most of the way there. I parked next to ROBZILLR (gtst), anyone from here???

Couldn't stay until the end because of work tomorrow, but there was a pretty good turnout for the Nissan drift-fest. Hopefully there will be more events like this, was pretty good. And hopefully next time I will have a camera to take pics. :lol: Jimmah, you can drift dude!! Josh is the stock white 32 yours???

The new gen fast & the furious is about O'Connor, changing the main character in a movie series is just crap. A was talking with a mate about a year & a half ago, and we were sharing ideas about if they did make a new one what it would be about. We agreed that it would be called 3 Fast & The Furious, and Brian would be in Japan to take the real scene on, and Vin Diesel would also be there, and they would become rivals in the Jap drift scene. So we weren't too far off.

Yeah, I do agree with you, but it's not the main reason!! You can't really see it in the pic but the right hand side (looking front on) of the bumper sits a little bit lower, you can actually put your fingers under the headlightlight, a gap of about 1.5-2cm. Also the end tanks of the cooler are sitting very close to the bumper still, the left one I think sits on it. This may be part of the problem by putting a bit of extra pressure on it too. I need to find time to take it off again & see what's going on, but I am fairly certain I know how to fix it. There is a round plastic piece (don't know what they're called) on the left that even with a screw in dosen't sit in with the bumper properly, but is does on the right & that is fine. It's not really straight, but there shouldn't be a problem with it. Will sort it on Monday afternoon or Tuesday, I would rather not have to spend about $800 when it could cost nothing.

I see very north is winning, yay. Still dosen't mean I spot anyone from sauwa though.

The car would look 200% better without the wing, front bar is fine & the wheels don't match only because of the wing.

A savaged stock s1 bar. And boostzor I am looking for one without the cooler being blocked as much, I am going to ring around for a type M because they look ok but I will just have to wait & see. Thanks everyone for the replies.

I have Kei Office on my 33 & I don't have any problems with them, the ride is a bit bumpy but that's all.

Ah, I see what you mean now. Paul's reply is pretty much spot on. I can guess a few workshops it could be from Perth, but how long have they said it will take???

Finished.

Pics of piping.