4door_Sleeper

All fixed. Parts from Nissan and supercheap.

Long time no posts Looking for the rubbers from the top of the front R33 GTSt shock absorbers (bump stops and upper shock absorber bushings - don't really need the dust covers ) I'm missing them and need them to re-install stock suspension to replace the Tein HA's.

WTB Cam Angle Sensor for an RB25. I think mine might be faulty, (intermittent splutter)

Wanted, boot lid lining. Condition isn't too important as it will go towards a template for my sound system. Needs to fit a 4 door boot (not sure if they are the same as a coup. txt message 0459 489 766

After a can of black PlastiDip anyone have some?

I will be there as usual. Suggest the usual meeting place - The Bikini (I mean Fashion) parade near the start finish line.

Nigel from "Bit Sus Imports" can help

Followed the order Black, White, Red, Green, looking at the plug from left to right, tab at the top. (both Tangles schematic and NSNR33 descriptions match)

Well it's all soldered up, heat shrink on and ........ nothing happens. Car turns over but no sign of life. Too dark now to do much else - I'll unsolder it in the morning and look for some sign that it has a short (I hope) Otherwise I may have to call a mobile auto electrician

Thanks for the wiring schematic Tangles, I'll save it incase I ever hit another wiring issue.

Thanks a lot. Hopefully i can be back on the road for the weekend

Hi Having a run of bad luck. The other day my air conditioning fan belt broke. got caught up in the thermal fan, then jagged the wiring for the Cam Angle Sensor, pulling out the plug and shredding it and the wires nearly as far back as the temp sender. Anyway, a long walk home, then an expensive tow truck bill, the car is home. I have sourced a second hand plug with 20cm of wiring still attached, but the wiring colours are different to mine, and there wasn't enough of my original plug left to work out the wiring order. Could someone please take a picture or report back on the order of the wires. My original wires are red, green, white and black, and I need to know the correct order in the plug. The plug is 4 pin, and looking into the plug with the wires out the back and press release button on the top I see this. =====[---]===== (....1...2...3...4.... ) ============ I searched the forums and goggled, but have not found a site that lives the pins in terms of wire colour.

WTB Crank Angle Sensor plug and 20cm of wiring (back to around the temp sensor wires) I broke an air conditioner belt which flicked up, tangled around the thermo fan and snapped the wires that run to the CAS. I need to splice in a new plug and wires ASAP. Thanks