AussieFella

Bump...

Bump, anyone???

Bump

Yeah I didnt have the bumper attached at that stage and I wanted to take a pic, its an old pic. The bumper is attached now

PICS: I will get some more as soon as I can.

Make:Nissan Model:Silvia Milage:87,XXX Transmission:5 Speed Manual Colour: Subaru Electric Blue Location: Warrnambool, Victoria (3 hours West of Melbourne) Complied? Yes RWC supplied? No Currently registered? No Price: 12k ono or SWAPS, see below Contact: PM Comments / Modifications: See below Images: See below Hi All, Got my car up for sale, I would consider it a project car at this stage, its 99% complete, and needs a couple of little things to get it up to scratch. Heres some details, 1990 S13 Silvia Q's RB20DET conversion - Motor freshened up with new gaskets, bearings + seals. 5 speed manual (rebuilt). Exedy brass button clutch + heavy duty pressure plate. 600x300x100 Intercooler K&N pod filter Drift Catch Can - Gates hoses. Just been serviced with new oil, coolant, iridium spark plugs, gearbox + diff oil. Just Jap R32 GTS-T Aluminium Radiator (brand new) Thermo fan + thermo switch Silicone radiator hoses Replaces heater hoses Gates timing belt Chipped ECU (Blitz I think) RB25DET turbo Speedflow fittings + gates high pressure hose from turbo. 3" Trust front pipe 3.5" Trust cat back LSD (tight) Painted Subaru Electric Blue (Same as WRX) Vertex body kit Neons in grille Lowered (unsure of springs) KYB shocks Replaced bushes throughout 17" 5 spoke wheels, powder coated white Falken Ziex tires Brakes have just been done; machine rotors, new Bendix pads. Drift Steering wheel I believe the seats are from an R32, not sure though. Autometer A/F gauge Speco Water temp gauge Speco volts gauge No boost gauge at the moment, will have one when its sold. Tinted Windows JVC head unit (not fitted) Needs speaker brackets. 6.5" Jaycar splits in front Pioneer 6x9" 450w speakers in rear Pioneer 12" 1200w sub, needs a box + an amp, all amp cables have been run into the boot. Bad points: Small paint chips on front bar. Small dent in LHS front guard. Requires intercooler piping (will possibly have cooler piping when sold) Rear tires are nearly illegal. I think thats everything, I have described the car as accurately as possible, and as above; I will get pics up as soon as possible. In the meantime anyone is more than welcome to come view the car, its located in Warrnambool, Victoria. Call 0447839790and ask for Ryan to arrange an inspection (you may need to ring a couple of times to get through, phone is playing up) I am more interested in a swap than cash, looking for an R32 GTST or GTS4 with mild mods (exhaust, cooler, filter), must be manual. But cash offers will be considered. Thanks for looking.

Nah need the aftermarket piping.

Hi All, Im after some cheap R32 cooler piping just to get my car running, I dont care what it looks like, as long as theres no holes or cracks in the pipe, and it needs to have all the silicone hoses + clamps. Let me know via PM. Thanks.

Wanted: RB20DET AFM PM me if you have one Thanks.

Also Need an RB20 turbo, so if someone has both and would be able to post both that would be even better

Hey Guys, Need an R32 RB20 radiator ASAP to get my RB20 Silvia running, if anyone has one can you please PM me with a price and bank details to deposit the cash to... Cheers, Ryan.

Back for sale. If you are GENUINELY interested, PM or ring me.

All sold! Thanks for interest.

My car is up for sale. 1988 Nissan Silvia S13 K Series 91,XXX kms. Manual CA18DET Power Windows Electric Sunroof Plates GOMENC (GO ME N SEE) Not included, unless I get a decent amount for the car. Currently Registered until May, wont come with RWC. ~Driveline~ Trust 20thou Over Forged Pistons Race Prepped Shot Peened Rods ACL MLS Steel Head Gasket - Brand New ACL Race Series Bearings - Brand New ACL Chrome Piston Rings - Brand New Gates Timing Belt - Brand New Brand New Head Studs T04E Top Mount Stainless Manifold Braided Turbo Lines 38mm External Wastegate + Screamer Pipe (Wastegate is brand new, never been on a car) Pintara 5 speed, short shifter. LSD - 2 extra shims, nice and tight! Front + Rear Strut Braces 3" Jasma Catback Exhaust, No Cat, Custom 3" front to suit T04E Drift Pod Filter Turbosmart Bleed Valve 4 x Bosch External Coils 600x300x75mm Front Mount Intercooler (No piping) Polished Rocker + Timing Covers Engine will come assembled, only requiring minor parts. Also needed is a new fuel pump, clutch, flywheel, tailshaft. Also have some spare CA18 Parts that will come with the car. ~Interior + Exterior ~ Autotechnica Steering Wheel 5" "Type R" Dash Tacho + Shift Light Speco Meter 2" Boost Guage - On A Pillar Speco Meter 2" Oil Pressure - On A Pillar Speco Meter 2" Volts - Above Glovebox Speco Meter 2" Water Temp - Above Glovebox HugeTech Sun-I STR-5 Remote Starter / Alarm System Generic Turbo Timer Custom Painted Interior - Black with blue trim. Vinyl Door Inserts, Glove Box + Parcel Shelf (Door inserts need to be re done, I will provide vinyl for this to be done) 25% Window Tint Tinted Tail Lights Painted Stock Rims Black (Has stockies on the back, will come with original rims) Spoiler Removed (Will come with car) I broke the front bar a while back, it has a black one on it at the moment, I was going to put a kit on so the colour differance didnt worry me. The car also has a sound system (Pioneer deck, subs amps, panasonic and kicker speakers) But this will all be removed to go into my next car, unless I get an offer to leave it all in there. There may be some details I have missed, Its hard to remember everything, lol. Car is located in Warrnambool in South West Victoria (4 hours west of Melbourne). Im looking for $6000, pretty firm on price considering the work that has gone into the car! Will also consider a swap for a registered runaround (Rwd, Manual). Please contact me via PM if you are interested, or want specific pics of anything. Can also contact me on 0431910365, As I dont use these forums much. Click Here For Pics!!! Thanks.

Hey Guys, Got some stuff i need to get rid of: 1. 5 x Speco Meter Guages - Boost, Water Temp, Oil Press, Fuel Level, Voltmeter. All with senders, new in boxes. $250 for the lot. 2. Radiator suit Ford Falcon AU2 V6 or V8. Brand new in box, comes with 3 year warranty. $250 3. Autotechnica Cannon Muffler - 2.5" In, 4" Out. Brand New $50 4. 3 x CA18DET Turbo Manifolds. $25 each. 5. CA18DET Motor, 80,xxxKms. Complete minus turbo. $1000 Located in Warrnambool, Victoria. Please contact me via my email: [email protected] Thanks, Ryan