emanuelt

How many of us Stagea owners are in Brisbane? or even Gold Coast/Brisbane? Could organise too all meet up? Dyno day in Bris for Stagea's? Cruz?

Sorry had to restart the dam laptop, follow the link for more info on the hyper rev mag.

Refresh page in a couple of mins i'll add a pic http://www.skylinesaustralia.com/forums/in...showtopic=49905

I looked up your kit in my trusty Hyper Revs Stagea mag and you kit is a " Charge Speed". 100% sure the front is anyway. Yes I think it all is. The pic in the book is a on a dark green Stagea Pg 104. Has the eye lids too.

Bass we can't see them you will have to re post the pics. Thanks

I'm not sure what you mean when you say "output to the solenoid has to be connected to the away side of the wire cut at the ECU loom " As it is only taped into this one wire I don't see how there could be an away side as it makes no difference as this wire is not intercepting like the DFA does it just taps in, thats all it does and mine is working good, just have to get it dyno tuned next week. I'll put some readouts on here later when its tuned properly. Don't ask me how it works only being taped not intercepted as I'm not sure, but it does work. Hope that help your question

Does this mean your Stagea will live in Bris?

What suspension has it got on it now? Is it good aftermarket suspentiion? How about a swap, my stock ones for your aftermarket ones!

I'm keen on the indicators PM sent!

When you can post some pics to give everyone an idea of what the finished surface will look like.

Still for sale now

Worked great, on the dyno it showed it was holding the boost really stable. If you want extra hoses go to Auto barn or similar. I got 1m of a couple of sizes just to be sure.

Only used for a couple of months, worked great, goiing electronic so selling it now. Its a red one. Posted $20 As talked about on this thread: "I found a good cheap boost controller for $22!!!" http://www.skylinesaustralia.com/forums/in...opic=73375&st=0

PM me to make an offer.

I don't think so as you don't want to loose air into the atmosphare?

Thanks for the help people, DFA installed and working finally. Now to the IEBC, installed to to my car, hand controller working great, put in SK inputs just to see what it does, BOOSTing way too high, I have no control over boost at all, input make no difference, have to drive home slow so it will not over boost? HELP Here are a couple of diagrams 1 wirering, 2 hoses. Pics have been revised so should be right now..

EIDS: Brisbane: Near new: Took BOV off so now not needed: Pick up or can post: [email protected]: HKS Electronic Idle Stabilizer EIDS TYPE-H1 $99 posted or picked up Cost $250 from BD4's comes with original recipt. In original Box with english instructions. Also has harnes. The HKS EIDS buffers dramatic airflow meter signal fluctuations. By buffering these fluctuations the EIDS prevents engine stalling or stumbling associated with sudden imbalances in air/fuel ratio of airflow meter-equipped vehicles that utilize atmosphere venting blow-off valves.

As you can see these current pics, the black plastic has lost its nice plack look from cleaning chemicals so not sure if its the best material, also when the bonet is fully closed it pushed on the air deflector, maybe it need to be slightly lower somehow. Also the scoop in grill is made from sheet metal and painted black, it all could be designed better but it will do for now.

Sounds good Bass, post some pics when done so we can see the finish surface.

I am going electronic so I am selling my one that I purchased through this thread. $25 posted. About 3 months old, was running 10psi. Any offers PM me. Edit: Sorry should have put this in the for sale section.

I seem to have missed where it says how to tell the diffence with IC1 and IC2 in the IEBC. one has a white dot one has a white stripe which is which? Both chips have PIC16F628A-20P

I wonder how much extra it would cost to get them cast out of carbon fiber looking material. I know someone who had there floors in his R33 done in carbon fiber looking stuff that was moulded to shape. I think he said someone who works or deals with boats and repairs can do it. Just an idea, maybe too expensive?

I looked at a maxima today and noticed its clear side indicators are a little bit longer and narrower but look like they would fit. How sure are you that they will fit? do you know for sure? I will phone nissan for a price. I phoned nissan, they want $87.20 for 2 maxima ones.

Thanks xRHETTx it is all good except for VR2. Using my car battery step 4, Adjust VR2 so that the output is 12V. PROBLEM is when I adjust VR2 it only winds up to 9.2 V's can't get it to 12V??? and it winds all the way down to ab out 2V's?? Any idea's? I think i'll give silicon chip a ring. OK don't do what I was trying to do and calibrate it using 12V as it is a 1V air voltage signal wind test pod to 1V not 12V. (still use car battery though) All working now.

Found the owner's manual for only $49.95 http://shop.importdriver.com.au/store/item.inetstore?id=737 Also R33 Skyline/WC34 Stagea Engine Service Manual in English for $$189.95 http://shop.importdriver.com.au/store/item.inetstore?id=291