cogs

Hey guys, noticed this vac line (I think thats what it is?) has been blocked off for some reason. In the pic the top hose goes to the BOV and the one below it has been blocked off. So where does this vac line normally go and why would it have been blocked off and by being blocked off what will it effect? Thanks.

Hey mate, I bought a set of floor mats for my R32 (genuine) and they were 5 piece. There are three piece for the rear. One mat on each side and another in the middle that goes over the tunnel. The rear mats all connect to each other. And yes it has a skyline logo on the middle piece. Hope this helps.

what wing/spoiler you got? painted? colour?

Hey buddy, going off your results maybe my dyno sheet was correct? My run Down: 1993 r32 gtst std internals rb20det std injectors and ecu ball bearing VG30 turbo hybrid fmic 3" mandrel bent custom exhaust from the turbo back bleed valve pod filter walbro fuel pump Adjustable FPR made 221 rwkw at 16 psi (i thought it was too much power for small mods i had)

hey buddy, just wondering if you can tell me what the green light is meant for? I had an autometer boost gauge in my car when I bought it and i found a green light that had been put into the steering surround. Free bump.

did you miss my questions??

Maybe thermo is for air-con then and has been disconnected since air-con was removed by a previous owner? Fan blades have already been cut btw.

Hey Oliver, thanks for your reply. It's just custom piping (the FMIC was already on there when i bought the car). It never came loose before but I had to take off some piping to get to something on my engine and now the piping is moving and hitting the fan. "just a side question. afte installing your cooler are the cooler pipes in the engine hot?" If you mean the intercooler piping that is under the engine bay, close to the engine, then yes mine gets a bit hot too.

Hey guys, had to remove some intercooler piping on my car the other day and I took it for a drive after and I noticed my water temp gauge was about 20degrees hotter than what it usually gets to (was going through drive-through). Had a look under the engine bay and sure enough the piping had moved forward and was stopping the radiator fan from spinning. Loosened a hose clamp and pushed the piping back towards the firewall and retightened but last night it must've come loose somehow (could be the slippery paint finish on piping) and had stopped the fan again (thank god for the water temp gauge). I've seen some set-ups that have a bracket welded onto the intercooler piping and it secures to the cam cover. Are there any other options? Who makes front facing plenums for Rb20dets and how much are they? ALso my thermo fan doesnt work (looks like the wiring has been cut). Is this easy to hook back up or should I take it to an auto elec? It never over heats but I figure having the thermo working would be even better? Thanks.

hey guys, I need some help. Previous owner had my car dyno'd. He showed me the dyno sheet and it had 221kw on the sheet (since dyno's measure power at the wheels I assume this to be 221rwkw). The sheet also had my cars rego in the description so from everything on the sheet I saw it was legit but I've always doubted the power output (I didnt buy it based on the claimed power output). Just for the mods it has, 221rwkw seems like a ridiculous amount of power from an RB20DET. Basic run down is. 550hp Walbro fuel pump. Adjustable FPR. Vg30 BB turbo. Hybrid FMIC. 3" turbo-back exhaust. POD filter. Exedy HD Clutch. Bleed valve - 16psi (Thats what it made the power at, although I've only driven it at 14psi) It runs stock ECU, AFRs tuned via FPR. He also said it had bigger cams (I have no way of knowing) and he believed it might've had bigger injectors but I think they're just stock (They're red and so are the ones in my mates RB20 180sx). So yeh, I'm pretty sure everyone here will agree it's not making that much power?

What should I run in my Rb20det? Mainly short driving. Mildly modded.

HKS F-Con piggy back work with R32 GTST?

why are you selling? it will fit R32 GTST as well wont it? Is it a low mount rail? Please PM me ASAP, thanks.

location? pic of blitz muffler please?

Neither me nor any of my mates are able to drift in GT4 (we can on GT3 easily though).

Hey guys, after a different BOV for my R32 as my current one is a Monza one and is running off the standard one (previous owner did it). Needs to bolt in position of factory BOV. Please PM me, thanks.

Hey guys, after a dished steering wheel like the Nardi Deep Corn (80mm I believe). Please PM me, thanks.

Yeh I love the Tony. Just bought an American Wasteland/THUG2 twin pack the other day for $50 (Harvey Norman). I'm enjoying playing American Wasteland so far (as are my house-mates hehe). I was reading a review for Project 8 on ign the other day.. didnt sound too promising from what they were saying.

Hey guys, the drivers side sun visor in my r32 broke the other day (wont stay up, just hangs down). Took it apart and a metal piece looks like it has snapped in 2 so seeing if anyone has one they're willing to sell. Please PM me, thankyou.

here's a new pic i took of my car.. keep them coming guys!

is it electric or mech?

does Blitz BOV have RB20 adaptor? What condition is it in? is it a monster tacho WITH shift light or just a shift light from a monster tacho? autometer?

I sent you a PM about the brake pads but you didnt get back to me.

hey buddy, is the apexi one still for sale? Im still interested but you didnt get back to me.

hey buddy, I'm still interested in the exhaust but you havent got back to me with pics yet. Please PM me. Thanks.