PSI086

Feels like it really starts to take off after 5000 - 5500 rpm providing that the tacho is correct which I think it is.

Just wondering if R32 GTR wastegate actuators are the same with both stock turbos and N1 turbos? A mate has just bought a stock GTR (upgraded exhaust and intercooler) and its really laggy and wanted to swap some N1 actuators onto it to see whether it fixed the problem. If not does anyone have any suggestions? Already checked the obvious things such as boost leaks, dirty air filters, etc. It still pulls fine to red line also without any misses.

N1 is sounding like the best option. It should be a lot better than a stock VLT one as its got the wider drive surface and matched with the crank collar it should be very reliable. Its only really the small crank drive surface and huge revs and lots of limiter that kill them isn't it? The limiter will be set between 7500 and 8000rpm so it won't be spinning as hard as a lot of GTR's I've got a JPC trapdoor sump to fit so that part is all sorted.

Not sure if this is the right section to post this but I'm after a few options for replacing the oil pump on my RB30ET with. The motor will be making around 370 - 380rwkw. I'm fitting a crank collar as the drive on the crank is damaged anyway so after talking to a few people I've had a few suggestions for pumps which are in my price range (Tomei, etc are all out of the question). Pretty much I've got the factory VLT pump, series 2 RB25 and GTR N1 pumps as options. I'll fit the VLT relief spring to the RB25/26 pumps as the oil pressure ends up too high otherwise. Which would be the best way to go? I've heard so many conflicting stories about the N1 pump but its probably the cheapest one of the lot as I've found new ones for $399 delivered. JPC told me they have run VLT pumps with no dramas and seen a lot of failures with the N1 pump until the relief spring is changed

Are these the ones which run all the way around the rear 1/4 window?

Still got a few bits and pieces left over which I'd like to clear out of the shed *Console with lid - $25 *Drivers side chrome window strip - $20 *Hicas power steering pump and reservoir - $20 *Wiper motor - $10 *Rear wiper motor and arm - $10 *Front seats in very good condition (drivers side back section had a slight twist in it but has been repaired) - $100 *Glovebox - $30 *Various dash and interior parts - $offers *Bootlid with shaved spoiler holes (gunmetal grey in colour) - $100 *Interior lights - $10ea *Power window assemblies - $20ea *Door handles - $10pr *Instrument cluster surround - $10 *Space saver spare and tyre (never fitted to car) - $50 PM me or Phone 0409 958 227 as I don't get on here much

Would cost a heap to send to QLD as its too big for postage. I know Tasfreight's minimum charge to Brisbane is about $140

Bump

Item: R32 Electric Window Motor Assemblys Condition: Excellent. Working fine when removed from car Price: $20ea + post Location: Tassie Contact: PM or Ph. 0409 958 227 will not answer sms

Item: R32 Hicas power steering pump and reservoir Condition: Very good Price: $20 + post Location: Tassie Contact: PM or Ph. 0409 958 227 will not answer sms

Item: Pair of R32 2 Door Tail Lights Condition: Excellent Price: $50 + post Location: Tassie Contact: PM or Ph. 0409 958 227 will not answer sms Comments: Gunmetal grey in colour

I've got a gunmetal grey bootlid off an R32 2 door with shaved spoiler holes up for grabs. In very good condition. Looking for $100 Also got a few odd interior bits and pieces Located in Tassie PM or Ph. 0409 958 227 won't reply to sms

550cc's sold also

I've got a set of 8 x 550cc's up for grabs

Bump. Indy Blues sold

Item: 8 x series 5 13B turbo 550cc injectors Condition: Very good Price: $450ono Location: Tassie Contact: 0409 958 227 or PM Comments Great upgrade for RB20, 26 and CA18 Item: 6 x Bosch Indy Blue 1600cc injectors with hosetails Condition: Very good. Were working fine when removed from my 10sec car Price: $300 Location: Tassie Contact: 0409 958 227 or PM

It was all in the pitch Ben Like Matty said thanks for coming along too. Looking at maybe having one to a random pub such as the Pub in the Paddock for a lunchtime counter meal some time soonish

*GT35 with 1.06 V band rear. Power ported front cover and 4000km old - $1450 *Black Motec M4 with loom and sensors to suit RB30 - $1200 *6 x Bosch Indy Blue injectors on VLT fuel rail - $450 PM or Ph. 0409 958 227

*GT35 with 1.06 V band rear. Power ported front cover and 4000km old - $1450 *Black Motec M4 with loom and sensors to suit RB30 - $1200 *6 x Bosch Indy Blue injectors on VLT fuel rail - $450 PM or Ph. 0409 958 227

Still got the door handles. The indicator wiring was all buggered. I sent you a PM somewhere about it

*Washer bottle - $10 *Overflow bottle - $10 *Drivers side rear 1/4 window still in pillar - $50 *Power steering pump and resevoir - $20 *LH power window assembly - $40 *RH power window assembly - $40 *Tail lights in excellent condition - $80 *Gunmetal grey boot lid with shaved spoiler holes - $120 *Rear seat in excellent condition - $30 *Front seats in excellent condition - $200 *Factory wheels with very good tyres - $200 *Space saver spare (never been on car) - $50 *Aircon pump - $10 *Interior lights to suit non sunroof - $10 Ph. 0409 958 227

Sold

Item: R32 GTST 4 spot calipers and pads Age: Came off 1992 model car Condition: Very good Price: $250 Location: Tassie Contact: 0409 958 227

Still got a few bits left over from my wreck that are taking up space. *4 spot front calipers with pads - $250 *Washer bottle - $10 *Overflow bottle - $10 *Drivers side rear 1/4 window still in pillar - $50 *Power steering pump and resevoir - $20 *LH power window assembly - $40 *RH power window assembly - $40 *Tail lights in excellent condition - $80 *Gunmetal grey boot lid with shaved spoiler holes - $120 *Rear seat in excellent condition - $30 *Front seats in excellent condition - $200 *Factory wheels with very good tyres - $200 *Space saver spare (never been on car) - $50 *Aircon pump - $10 *Factory fuel pump and cradle - $20 *Interior lights to suit non sunroof - $10 Located in Tassie Ph. 0409 958 227