mr_squiggle_1

Im hearing very good things about these bilsteins, but are they as stiff as a set of coilovers? i have the intentions to maybe drift the car or do sprints in it in the future and from my experience with a few different silvias ive found that coilovers were the best hands down. As far as the shocks are concerned how do they improve the cars handling and how stiff and low it is? i would have thought that the springs mainly dictate this. Can i get some info on why these shocks are better, taking into account that id probly still be running stock springs and everything else for a while, would i see any improvement from that?

Is it a must to convert to 5 stud if you whack a turbo on a gts? couldnt you just redrill z32 300zx brakes or something to fit and leave it as 4 stud?

thanks for the suggestion but id rather put something a bit lower in anyway. Steve.

thanks for the help guys, yeah im really hoping mine can be fixed by removing a fuse.

Thanks for your help. I have just seen that in the group buys theres only one set of bilsteins left and i wont be able to purchase anything until after new year so my chances of grabbing them isnt too good, is there similar brands that are just as good? or where could i find more bilsteins? Has anyone got any more advise which would be of help? Thanks, Steve.

Hey guys, my 4 Door Gts R32's front shocks have just about died on me, theres a fair bit of klunking etc coming from the front. Im looking at options to replace these, and whether its worth spending the extra money for coilovers or putting some pretty standard shocks in for now. In the future i will definately be getting coilovers for the car (less than a year i guess), these seem to be the obvious choice but i havent found many sets of coilovers on the site. I have looked at Sydney Kid's bilstein and whiteline packages and wanted to know whether using these sort of shocks are better price and performance wise to say a set of tein coilovers for example. What are your experiences with coilovers and shocks and what do you prefer/reccomend and what price do they go for approximately? oh yeah and where could i find them? Also wondering whether its worth buying all four or just the fronts for now, suggestions also welcome. Any help will be greatly appreciated. Steve.

Hey guys my car (HCR32) seems to make a a ding or a ring noise when im on the highway, when im doing about 110 or so, im assuming this is a speed warning you can set into the car or something. My question is, can i turn it off? or change it to like 120 or something cos i mean driving to the coast where the speed limit is 110 is farkin annoying to hear it the whole way. Has anyone come across this before slash know how to change it? Any help would be great. Cheers, Steve :sorcerer:

ohhh man ill see if i can get off work early to come and have a look! I should have my 32 by then too, too bad its not exactly track material as of yet. How many people are expected to be out on track on the day at the moment?

Thanks SMR33, how can i confirm from the info you gave me that the car is a Vspec II? Im sure there must be some way? other then obvious things like the brembos, etc... Sorry if this has been covered through out this thread... i havent read it all.

Hi All, Can someone plase FAST this VIN for me: 6U9000BNR32310720 Thanks, Neil

I can also vouch for this car, immaculate, brad babies this thing! Neil

Thanks guys, ill try cresta and stephen22 first and if i cant get anyhting from there ill get intouch with you 2 other guys. Thanks alot for the help, Neil

Hey Guys, I need a afm plug fairly quickly as my car is booked in for a tune soon and the afm needs to be put on prior to that. I have rang around numerous wreckers but have been told no by every single one of them. I have also tried nissan spare parts to be told i would have to get the whole loom in order to get the plug... Does anyone have one which i could buy, or know of some where i could go to get one? Neil

Hey Guys, Im in need of a series 2 afm plug. Its the 3 pin design not the 5 pin one. Im having terrible troubles trying to get a hold of one. Send me a PM if you can help me out, Neil

White. In the middle of replying to PM's now guys. Lots of interest so far. Neil

Hey guys, Got quite a few bits and pieces to get rid of. Have prices for some of it but alot of it i have no idea what its worth so throw me an offer. R32 Have a R32 write off, next to everything on it is for sale, minus engine, gearbox, loom, ecu, brakes, etc. The car hit a pole in the drivers side rear quarter, but doors rear bar etc are still fine. All interior is available. Basically ask for what you need and ill let you know if i have it. ** Aircon setup is available, aircon compressor, condensor, and most lines... ** S13 *Ca Radiator and shroud - $70 *Stock Silvia Grille - $20 *Speedo sender unit (thing that goes in the side of the G/Box and sends the vehile speed to the cluster) - $40 *CA Brakes, Includes calipers, discs etc. - $20 *S13 Side mount with all associated piping - $60 *S13 Stock rear camber arms - $40 *SR20 Crossmember S14 *Clear Jap Spec S14a indicators - $60 *S14a Rear cradle, complete, diff half shafts, calipers, discs, etc $500 R33 *Brake Master Cylindar, No booster, just been reco'd - $120 All items located in South West Brisbane, prefer pick up but can post some items. Cheers Guys, Neil

interesting only 7kg/mm. Ill have to get the measurements for my rears because it is looking like i have an odd setup. Thanks heaps sydneykid! Neil

Hey SK, Can i please get the rates for these specs in KG/MM preferably. OD: 86mm # Coils: 9.125 Coil Diameter: 12mm Im expecting it to be 8kg/mm or so. Thanks, Neil

Yer its not a skyline but it may give you some ideas... the rsm is infront of the dash cluster, and the other one is my avc-r nicely down low out of sight... kinda. Neil

go here: http://www.jdmoc.com/forums/showthread.php?t=7 after i read this i got interested and did some searching, all the files you will need are there and the host id fast, i was downloading at 168k/s. Hope that helps, Neil

what is this software? ive never heard of it before. sorry for not being of any help. Neil

Chilton Engineering in woolloongabba build race engines for many well known people. I have had an engine done there and it runs flawlessly, cant recommend him enough. Neil

Oh well no worries, if you get all sorted out in time come along. And by the way rb20inside my slivia isnt even riced out, it has a kit yes but thats it... non of these stickers, shopping lists and neons just a nice clean kit. Just cos you think its cool to look stock. Ill bring along a camera, and take a few shots of it and we can post em up, hopefully make it a regular thing. Neil

prolly not such a good idea to post up where we will meet shanef, dont really want unwanted attention from the po po, as some of us may have defectable cars. Not me but a possibility. Keep it all to pm, whats with the ./ ? Neil

Id be keen to come, Pm me the details. Be good to meet a few more ppl from around where i live. Neil