BAMR33

Hey guys, Need what's described in the title, r33 garnish with skyline on it. It pretty much has to be off a series 1 because the series to were painted. Brett.

4.5"?!?! are talking about an exhaust for your car or a drain pipe for your house...

You will need at least a 1.21 gigawatt flux capacitor to make very fast extreme gforce power

should be DB1170 if you can find a Bendix book i.e. parts store you can match them up with the pictures provided.

So have you replaced the battery and it's still doing this? Because to me the that is either a flat battery or the terminals aren't connected correctly.

Swap a dash cluster with someone, see if it's the problem.

Yes, it keeps the wastegate completely closed for longer. You'll notice better response, more midrange and a better boost curve.

Activates your spottys when your out roo shootin yeeeha

bump

They're all plumbed to atmosphere in the same spot, it's to prevent the discharge of fuel vapour under the bonnet, which would be a bit of a fire hazard. Heaps of people people block them off, doesn't really make a difference one way or the the other. The amount of air bleeding out of that small tube would be minimal.

EGT, Oil Pressure, wideband air/fuel, probably also go a knock warning light.

Flatstick 1. Golf Definition: Slang term for a putter, because putter faces are considered flat relative to other golf clubs. Reality check: Most putters are not, in fact, flat. In other words, putters, too, are lofted. You can find putters with zero degrees of loft (true "flatsticks"), but most putters have 3-4 degrees of loft to their faces. Alternate Spellings: Flat stick

I can't believe people are even debating this... GT-R.

http://www.loctiteproducts.com/products/de...49&plid=615 As for the mirror check out some of the 'wrecking r33' threads.

what's the difference if they're unmarked... the signs the cops the put up are small and you barely notice them as it is and the police signage is usually only on the side of the vehicle where you won't see it. I cringe at the sight of any newish 4wd wagon on the side of the road. A lot of time it's just some jackoff who bought a huge 4wd and can't park in a regular car park so it's limited to the side of the road or the footpath.

From: BAMR33 To: Greased Up Deaf Guy PLS

might have another go at the ap12 maybe I was doing something wrong.

I've got an AOpen mini pc (MP915-B) as a media computer hooked up to the LCD tv and it does an unreal job. It would also work very well as an in-car pc. I bought mine off ebay for $138 posted which is friggin good considering how small it is and still has a 1.7Ghz Intel M processor, 512mb ram, 40gb hdd, usb, firewire, wifi, dvi out etc. etc. http://www.pcstats.com/artvnl.cfm?articleID=1965

Don't care about the length, It's the thickness of the rope that prevents it from being feed into the motor. Jack88 I don't know whether you have a different aerial motor to me but there's no way the ap12 would wind on mine. I've previously pulled the plastic case apart and the ap12 was to thick to even feed through to get it started.

Yeah, the Aerpro ap12 is the falcon mast & rope I've already tried, not even close to fitting. Anyone know of an aftermarket mast and rope to suit r33? sharing is caring

Hey guys, As per title I'm trying to find out what rope will suit the r33 aerial motor. A part number would be great or another car that uses the size aerial and rope would also help here. So far I have tried a falcon rope & mast but it was the wrong size rope. Any help appreciated.

Hey guys, Need the r33 Aerial and motor assembly in working condition. Thanks

http://www.nissansilvia.com/forums/index.p...howtopic=336529 try this guy he's got r32 rack ends listed may also have r33

One circlip below Sk's recomendations, and it's not low at all.

I'm having the same issue's as you are at the moment with the SK suspension but only on the front end (r33). I've cut the bump stops down to the point where they're nearly doing nothing . While the car is on the ground you can see and feel the travel between the bump stop and the strut top is just under an inch! My front shocks bottom out over smooth speed bump at a normal speed and I dread pot holes of any size. I think the shock absorbers provided do not suit the application. They don't have enough travel to suit the car or the spring. The only cost effective way I can see to fix the issue is to get heavier springs, which will make the already bad ride quality worse. Anyone else having these issues please post here.