coljon

About $5500 for motor and box with wiring loom and computer. Installed ourselves so cost only our time. Think we found the problem, part of the wiring loom is missing now we just have to find one

Installed r32 gtr26 motor and wiring loom with computer into r32 gts4 20. All plugs fitted except there is no plug for the PCM valve and another plug on the front relay box has one extra wire. Now motor wont run sounds like injectors are not working, can get it to start with aerostart but wont run. Do we have to change some wire on the injectors. Any advice will be most appreciated. John

Thanks for help everyone, pulled head off last night, no compression in front and rear cylinders. Burnt a hole in exhaust valves. Car is running high boost 14psi I think, he is concerned because it has flat top pistons which would give it very high compression. Pistons have the no. 59S & .05 on top of them does anyone know if these are standard pistons Thanks

Downloaded it yesterday from web site - thecarscene.com.au just join up its free . If you have trouble finding it let us know and ill direct u to it if i can

My son just recently bought a "89 r32 gts 4wd Skyline witch was running fine till today. While driving the car started missing and loosing power, he removed the plugs and two of them were melted. Put in new set of plugs but now it is still missing badly, sounds like timing is out to me . Any help greatly appreciated. What causes plugs to melt? Occasionally the 4wd dash light flashes on but i dont think this would have anythink to do with it. Hard to work out with no manual.