masTers

If you are in Perth and want to talk RB26 rebuilds, go see Josh at Galvsport in Ossy park.

I have a silvertop manual ECU if your still chasing one. $100

Just on one month to win lotto

Hey mate, have seen some of the work you have done on Nicks 31. I'll be in touch about getting a radiator cooling panel made up once my front end is back together. Unless your brave enough to make a mould of my radiator shroud and then make one out of carbon?

PM sent

If it is rated to 450, that's an absolute bargain in my opinion. Saves alot of hassle. I had a Z32 box with a modified R33 bell housing behind my FJ20, it wasn't that heavy, and the Z32 shifter lined up to the stock location quite well.

I saw that, will be very interesting to see how you go with it as I was contemplating getting that for my HR31 as well. Mainly as it costs about the same as a 25box conversion. I wasn't aware it was rated to 450hp.

Dennis are you selling the JICs? Are the lower bushes in great condition? Can you PM a price or send me some pics? I am a little worried about the JIC's in my 31 ATM.

I still have some random DR30 bits laying around from my previous build. Brand new coupe lower rear qtr window and lower door trims. As shown below, all are brand new in boxes from Nissan, and I believe discontinued. Paid $1000 from Jenesis a few years back. $600 + postage. Will come in handy if you are respraying/restoring your 30 coupe: New Bride seat rails, have only been test fitted into the car. I was using them with some Recaro recliners. Again, I paid alot for them from Japan a few years ago. $300 + Postage. I can organize a courier at your expense (i recommend this for the rails). Black electric DR30 mirrors. Were working fine when I removed them. $100 + Postage. Cheers, Steve

Or failing that Jeff I have a set of Bride seat rails to suit R30 Skyline. Just to be clear, that is rails only. Chasing $300 + Postage, I'm in Perth. Cheers, Steve

For those asking this appears to be the best place to grab a rebuild kit: http://www.horsepowerfreaks.com/partdetails/hks/Clutch/Rebuild_Kits/Clutch/17396 So for just over $1000 you should have a near new HKS twin plate (I believe everything is replaced bar the flywheel). Or if you want something a little closer to home, I think that NPC can rebuild them too, but I am not sure on the costs involved. Either options are still cheaper than a new clutch.

Guys I have my old RB20-DET sitting at Racing Dynamics. Motor has no coils, manifolds, flywheel or wiring. It does come with the following: Polished CAS, Cam & Coil covers New R32 GTR oil pump New Water pump Nismo timing belt Nismo thermostat New gaskets and seals Nismo oil cap. From memory it was around 120,000 kms. Only did 500kms at most after the above was carried out, then was swapped for a RB26. $700 ono, pick up from Malaga. Pics here (sorry work has blocked photobucket), I would recommend giving it a once over with some autosol. http://www.gumtree.com.au/s-ad/dianella/engine-engine-parts-transmission/rb20-long-motor-rb20-det/1047610481

Thats cheap! Have you tried the 31 club forums? r31skylineclub.com Should go quickly on there.

From personal experience, Robson Design (Singapore) charge a bit more than $300 to retrim a steering wheel, their gear boots are about that price. Don't be scared though their quality is amazing and worth every cent.

Did you check out the car? How was it in the flesh?

Woza how much do you want for the sump? PM me if you like. Cheers.

I stubbed my toe on this today, local pickup only, or if you catch me in a good mood I'll deliver it in the metro area. I am not keen to send it interstate. $250.00

Fatz what rack did you drop in?

Brand new Autronic 500R direct fire CDi. $700 posted anywhere in Australia. Brand new polished Aeromotive A1000 fuel regulator. $225 posted anywhere in Australia

Guys I have for sale the HKS twin plate that came in my HR31 Skyline. Whenever I drove the car it wouldn't slip, however upon pulling it out of my car and pulling it down it looks to have gotten quite hot at some point in it's life time, and I was recommended to have it rebuilt. I got quotes between 1100-1300 for a rebuild kit. However there looks to be a decent amount of meat left on the plates. As I said it drove fine, but I can't make any guarantees, hence the price. $300 ono. Pick up from Dianella. Cheers, Steve

SMC sold. CDi is still available. Will consider swapping the CDi for a brand new set of splitfires to suit ER34 and a new coil pack loom.

Beyond Custom in Morley if your NOR.

Will do both together for $1500 delivered anywhere in Australia

I have for sale my Autronic SMC + full length loom. $800 including postage anywhere in Australia Also have a brand new 500r CDi - $800 including postage anywhere in Australia. Bank transfer, PayPal or Cash on Pickup only. Cheers, Steve

As title states I'm chasing a Nismo Coppermax Twin Plate to suit a RB25-DET. Cheers, Steve