femno

so what is this like the 10th thread in the last 12months where people are sooking about skylines being given a bad name again? cmon guys surely youre used to it now? +1 al33x you make me chuckle haha.

Needs all these parts gone

anyone?

Sure. Pics: Note: Adjustable FPR not included. And also the heater box has been bypassed if youre wondering what the go is at the back there.

SOLD Pending Payment

The engine is a Silver Top model. No compression tests were done because the engine ran like clockwork upon removal, and had no trouble making the power at Status. The engine and box have been removed only due to full 25 conversion.

must go asap guys. make offers!

lol @ 40m burnout

Greetings, Some Series II R33 Skyline Parts up for grabs: Series 2 3 Pin Pink Air Flow Metre - $80 Power Steering Rack INC Rods, and Rod ends, rack boots and rod rubbers in good nick - $80 Power Steering Pump - $60 Power Steering Reservoir - $25 Power Steering High Pressure and Return Lines - $20 R33 Front K Frame - $75 RB25 Engine Mount Left - $25 RB25 Engine Mount Right - $25 Aircon Compressor - $50 Thats all the parts, please dont ask for any others as I dont have any! All prices are nego within reason. No pics available as these are run of the mill regular parts. Located in Melbourne, posting no drama. Cheers, Mat. 0400 558 030

Hi, For sale here is a RB20 Engine and Gearbox removed from a 1990 R32 GTSt with 108,000kms shown on the clock. The engine is extremely healthy with no smoke, bottom end knocks or funny noises. Only street use tuned safely to 190kW by Trent at Status Tuning. Oil and filter always changed on a regular basis. It includes: Long motor from rockers to sump Inlet side complete inc Injectors etc Crank Angle Sensor Exhaust manifold (not fitted) It doesnt include: ECU Loom Coilpacks Turbo and Water/Oil lines Crossover Pipe Its worth noting that there are NO broken studs in the head for the exhaust manifold, as this is a given when removing RB exhaust manifolds. Price: $800 Also for sale is a RB20 gearbox removed from the same car. The bearings are quiet, no input shaft bearing noise (common) the synchros are in good nick apart from a light notchiness shifting quickly to 4th and 5th at higher rpm but at lower rpm its fine. This could be partially rectified by using Redline Lightweight Shockproof oil. Price: $400 Parts are located in Melbourne, prefer local pickup but shipping can be arranged. Cheers, Mat. 0400 558 030

Will also sell for $400 outright.

Hi there, For sale is a Exedy Heavy Duty Organic Clutch. Includes the trademark bright pink pressure plate, and the Exedy clutch plate. Also includes a RB20 Flywheel. The flywheel has a couple of small heat cracks; nothing to worry about. The flywheel can also be used on RB25s. Slightly heavier pedal feel than standard, with a nice positive and smooth engagement from the organic plate. Has had approximately 1,000kms @ 190kW street use only, the pressure plate surface is almost as new, with no heat concentrations. The machining marks can still be seen on the flywheel. Selling only due to upgrade. Suits RB20 and RB25 (non-neo turbo) engines. Price: $250 Located in Melbourne, postage not a problem at all. Can arrange install in Melbourne. Pics are struggling to upload so will have another go tomorrow. Cheers, Mat. 0400 558 030

Hey guys, I have a set of Splitfire RB20 or RB25 Series I coilpacks, second hand but perfect working condition. Im looking to swap these for a set of RB25 Series II Splitfires. Let me know if you have some you need to swap. Cheers, Mat. 0400 558 030

Hey guys, For sale is a HKS 2530 Turbo Kit. Used and in great condition, this package includes absolutely everything you need to fit this turbo to your car in the comfort of your own garage with basic tools. The turbocharger is in perfect condition with a suitable amount of shaft play and absolutely no signs of worn oil seals at all. Kit includes: HKS 2530 Ball Bearing Turbo Actuator Braided Oil Line Water Lines Fittings to connect lines to engine block Stainless Steel Hot Pipe and silicon joiner which will connect to the factory intercooler piping This turbo is a great turbo for your RB20, arguably the best combination of response and top end power on the 20. With cams and 20psi weve seen around 230kW from these type of turbos. You could also bolt this to your RB25 for amazing low and midrange power to rival most production V8s! Also, this turbo will bolt straight onto your factory nissan-flanged dump pipe, and connect to your factory intake pipe. Located in Melbourne, postage not a problem. Pictures to follow tonight. Price: $1500 Cheers, Mat. 0400 558 030

any offers?

I wouldnt rely on locktite to hold that fitting in by itself. Clearly it should be an interference fit into the block. The continuous expanding and contracting of the block and fitting will eventually weaken the locktite and pop goes your fitting.

Its the splitter in the middle that determines the level of seal from the main to the actuator side. If you contour the splitter well enough to suit the turbo it wont leak much. They can still sound pretty good, depends on pipe length / size / etc. I say go for it and if you dont like it take it off. Pretty simple.

last chance to grab some mats guys!

Offers Considered

any nissan spare parts dealer will have one of these in stock. just go there with your VIN. its that easy.

Stuff not listed as SOLD still available.

quick, drop this in before the 30+ days hit again!

They will fit EVO9 but they will sit right on the guard if not out from but only just. You will need rolling for sure. Maybe some extra camber. Will look insane though.