femno

Any workshop should be able to do the conversion, well anyone who works on skylines all the time should be able to do it anyway. There is a small amount of welding to be done on the crossmember, and the driveshaft needs to be shortened, which can be sublet by the workshop to a driveshaft specialist.

JL Amp SOLD

If you want 270 go for a 25NEO (R34) Hiflow. The 33 Hiflow wont make that power, you need the larger housing of the NEO to get that power, but will still be responsive as hell. The best 2 turbos to compare are the Hiflow and the 3076, the Hiflow is way more linear in delivery, whereas the 3076 has a touch more lag but has a nicer kick and has the ability to make a bit more than 270. The Hiflow is a bolt-on but the 3076 requires alot more work to fit, so consider a fair bit worth of labour costs. Changing manifold studs for spacer...oil/water lines...youll need a custom intake pipe too.

Well obviously you dont understand the fact that oil pressure is crucial for the survival of the engine. Just fix it and be done with it, or take it to someone who can! You can drive it if you like but chances are you wont get very far.

Hey guys, bit of a garage clean out: > Alcon GREX 315mm Rotors - $200 26mm Thickness, stuff all use, imported from japan with this minimal wear. Thickness currently at 25.5mm both rotors, GREX stamp looks like new. Suits rear application, will need hats made to suit your car and caliper. Good cheap upgrade. > R32 GTR Horn Button - $75 A rare occurance. Can fit into any GTR and GTSt steering wheels. Mint condition. > R32 Passenger Side Headlight - $50 Good condition, although has a crack down near the outside mounting points, but everything is still there so its usable. All mounts are intact. > Autotechnica Steering Wheel - $50 Suits any boss kits. 350mm in Diameter. Great condition and lightweight. Smaller than a std line wheel. > JL Audio Amplifier - $50 e1200 model. Full range monoblock amp. Can run subs or component speakers. 120W RMS at 2.OHM or 200W RMS at 4.OHM > Genuine Nissan Oil Filter - $5 Genuine unit, unused. Suits all RBs. Cant use it with my relo kit. > R32 Indicator Stalk - $30 Works great, bought as replacement but sold the car before installed as clicking mechanism failed. But anyway this one is perfect. > Pod Filter Foams - $10 Suits HKS GTR Pods, the small 150mm type filters. > Blitz DD BOV - $80 Could do with a clean but works fine. Gives a sick, off tap, mint sound. All parts located in Melbourne's east. Happy to post items at extra expense. Cheers, Mat. 0400 558 030

Man, whatever happened to the times where someone got a result after having work done, they were happy with it, and wanted to share it with others who might be interested and give positive comments? Where are the 'nice one man, nice power im happy for you' comments? It seems its now a comparison of who thinks they have the biggest penis extension here... Who cares if you have a smaller turbo and it makes more power...nobody gives a f**k. And if Bas wants to have 'dose' then who are you to tell him to get rid of it? You know-it-alls should step back and take a hard look...first try comparing apples with apples; why would you try and put someone down after posting up here, clearly very happy about their result? Congratulations Bas, its a good figure and cant wait to see what the final result is once you take it back to get it finished off. Deans punched out 330 today so well have to line you guys up and see how you go!

Price for engine only and everything needed to run it? Not interested in gearbox, intake and other stuff.

I agreed that if you drive sensibly you dont get in very much trouble, but its not always true. Anyways Id like to pick one thing out of this rubbish; according to you attitude plays a huge part on whether the fine/defect/whatever is issued. Ok. Show me the part of the law/rules that says something like this: 1. If offender is polite: let them off. 2. If offender is a 'smart-ass', be more inclided to issue a fine. I dont think there is anything like that thats written. Sounds like an obuse of power, as per usual. If the driver did something wrong, fine them. If not, dont. Its pretty simple. Its the 'cops on good days and bad days' that is bloody unfair. You either did something wrong or you didnt. Surely you guys are trained to deal with people's bullshit; im sorry but bad attitude isnt reason to give someone a fine.

Clark Rubber. 2mm rubber and cut one out.

sold.

You changed the pump and injectors but not the fuel filter?? You can measure all the fuel pressure you like but you also need to check the system flow, thats just as important. Use a timing light; that will tell you where the timing actually is and if there is a possibility of the cam timing being out. and also: Are you sure its actually pinging? Some boost leaks sometimes sound like knocking. Just an idea.

Hey guys, I have this spare so its up for grabs, a Bosch 040 in-tank fuel pump. Brand new, in sealed package, never opened, never used. You all know what it looks like. $195 plus post, pickup available in Melbourne's East OR S/E. Cheers, Mat. 0400 558 030

buy your car a xmas present! go on!

tiz on my calendar.

Its fairly easy. Just go to a zorst joint, pick up x2 3" 45 deg mandrel bends, after a bit of looking a measuring, just cut them to suit and then joint with silicon. If you have access to a welder then weld them together. For the 2 small pipes, thats a little tricker. You can use the factory metal pipes; chop the ends off, weld them to the intake pipe, then use a piece of rubber hose to joint the two. Its a bit of fart-arsing around but its do-able, but you need a welder to do the smaller pipes.

Have you tried CRD? I sourced my turbos from there and were extremely competitive compared to other sellers such as ATP etc etc. We also purchased a 3071 from them a while ago and from memory it was 1700 or so, but more to the point it was the best price going around at that time compared to others. Give them a call. P.S there is one in the FS section but I dont know what the exact specs of it are.

Hey man hows things? What rear is on the 3076? I dont spose it would happen to be a twin scroll either?

Russell you coming down for a look? Bas how is the car coming along? Timmy says you maybe wont make it in time for this...

Hmm SE... Highett Metal. Theyre in Braeside.

bump condensor still for sale

Take it back to where it was tuned. You should have good economy if the tune is sweet. It may be pointless even replacing the 02s if they arent even turned on in the PFC.

Seriously, youre stressing way too much. Have them faced as above, and slap in some 33 or 34 sensors. Use the old 34 ones, if your tuner is good he wont even have 02 sensor feedback on so it makes no difference.

Thanks. SOLD guys

Hey guys, This is a BRAND NEW Japanese Genuine Ing's Full Carbon Fibre GT-Wing. It is 1500mm in width and sits approximately 250mm up from the bootlid. With this width the ends of the wing line up with the bottom of the door windows. http://www.ings-net.com/products/z-powerwing/index.html Includes feet and mounting blocks, the wing is height and tilt adjustable too. Has never been mounted, comes packaged in its original box, only ever been carefully removed and test-fitted. Pics show test fit on R32. Looks insane on anything. This wing weighs only 3.5kg!!!! The mounting blocks do not suit flat skyline boots and will need to be modified to suit. If not just use some aluminium angle to mount it but its no big deal at all. This wing retails at $2,100! Selling for $1,000 FIRM NO OFFERS. Located in Melbourne's east. Cheers, Mat.

Send in my Noms! Cmon SAUVIC!! Get those Nom Nom Noms in! It takes only 5min of your time!