Kaido_RR

Pm sent

Hi I am looking for an r33 or r34 long motor, prefer long km, must be in good condition. Located Perth, but willing to pay for shipping PM and or reply in topic

Hi, I have a problem with my front turbo on my r32 gtr. Back story, purchase a set of HKS GT-SS from japan when they arrive the seals where gone in the turbo's so i had a full rebuild done on both turbos, then about a year later, my trust airfilter fell apart and was stuck into the front turbo damaging the turbo wheel. Had the front turbo rebuild again. Now the front turbo is leaking oil from the housing, there is also a build up of oil in the intake pipe (photo attached), The car still runs fine, turbo boost fine and makes good power and there are no sounds coming from the turbo. Does anyone have any idea what could be causing this? One of the suggestion by my mech is that the turbo does not have the correct restrictor installed and therefore the turbo is getting too much oil (however he isn't 100% sure), the rear turbo does have a slight amount of oil on the housing but no where near the amount of the front turbo also the front turbo is leaking enough that it drips oil in my garage but the rear does not. From what i remember the turbo had the restrictor installed already in the turbo housing in the oil inlet. Is it possible that the restrictor wasn't put back after the turbo was rebuild the second time and if so would this cause the oil leak i am seeing? Any input or help would be greatful

Hey, Looking for some help regarding wheel alignment setup for my r32 gtr track car. I know i will be limited due to still running street tyres atm (Advan AD08 255/40/17) Car is running the follow suspension gear: FRONT: Nismo circuit pro-link setup (replace all standard control arms) ARC adjustable swaybar Quantum Coilover with swift springs (10kg/mm) REAR: Ikea Formula Full rear suspension arms (fully adjustable) ARC adjustable swaybar Quantum Coilover with swift springs (8kg/mm) HICAS Removed I know i will be limited to adjustment at the front due to the nismo arms being fix, however could someone give me some spec of what i should be aiming for front and rear? My aim is to get -3 degree camber at the front and 4-5 degree of castor if the nismo arms allow it. However i am unsure on what toe to run front and rear and what camber on the rear? is -1.5 too much?

Hey, I am about to do the 100,000km service on my R32 GTR, when i purchase the car the owner told me it had an engine swap from a R33 GTR. However all i have to go on was his word. Now i am looking at buying one of the Kits Kudos motorsport sell for the 100,000km service however i do not want to purchase the R33/R34 Kit only to find out i have an R32 Rb26. Is there any way i can check via the engine number? The engine came with N1 Turbo (which have now be replaced), i could check the ID plates on the old turbo to see if they are r32 or r33 N1 but i guess that is not 100% on what the engine is any help would be great Thanks Kaido

Hi, I need to replace my clutch in my r32 gtr, I am getting myself a Nismo Twin Plate, however i am not sure which model. The car is a 1990 R32 GTR however it has an R33 GTR Engine my question is would the engine affect what type the clutch is pull or push? Cheers Kaido

http://www.youtube.com/watch?v=O9qyugUOhl8&feature=related

this will explain all

you can use the std r33 gts-t bonnet. i ran gtr front guards + risers + s3 gtr headlights with gts-t bonnet and front bumper i had to take a grinder to the bonnet to make it fit but its do able. Overall it was pretty missmatch but since it was a track car didnt really matter best pic i have

yeah, 100% sure. when i 1st got them and using them in my previous track car they were making 350rwhp at 60-70% duty cycle (can't remember exactly). however they did sit around in the fuel rail doing nothing for a good year before they went onto the gtr so i would not be surprise if they are dirty.

as mention my injectors need a clean, i had been using them for 2years in my previous track car before i put them into the gtr and they were bough second hand. When i had the car tune i wasn't interested in upping the power as i just wanted more seat time but since then the car hasn't been driven for almost a year and only recently have i started working on it again rebuilding the turbo 2x nothing wrong... 1st time was because they had done the bearings, second time my filter let go and destroy the wheel. I find the GT-SS laggy my previous track car was single turbo rb25 with similar power. Also doesn't help my other track car is an evo which has insane levels of responses i understand this but the car has spent more time sitting in my garage then driving if the sump was to come off i know it would soon turn into a very hardcore build which atm i want to try and keep as simple as possible. The car was already achieving good times at the track with n1 turbos and std ecu.. i just wanted something less laggy and more reliable hence i went with the gt-ss thanks will check them out

nope. ideally i like to stay with the twin setup however, after rebuild them 2x now, and having issue with the std fittings i am just sick of the setup and working on it isn't the easies thing to do compare to a single I don't want to to push anymore than 400 maybe 450hp max because the car is predominately a race car and with the known oil issue in the rb engines i don't want to lean on the engine too much. i'm currently making 370rwhp @ 18psi with the gt-ss power is limited by my injectors (600cc @ 90% duty cycle, then need to be clean and flow tested) Also i do miss the gate, and the way a single makes power compare to twin setup... i find the gt-ss laggy

hmm i was thinking 35R.. i wonder if its worth buying a t51r kit selling the turbo and just using a smaller garrett turbo

Hi, Looking to do a swap from my HKS GT-SS setup to a Single on my GTR. Don't really want to fk around with having everything made up custom work etc what companies make off the shelf single kits for the rb26? I know HKS make the T51R kit but i think that is way to huge (looking for 400hp ish)