jetman

I have a gtr timing cover for sale in std matt black for $155 delivered if thats what you want.

i have a working R32 gtr clock $100 delivered and a straight through pipe that replaces the cat for $80 + delivery, you can weld a dummy cat on the outside of it, or the both for $180 delivered

I have a GTR R32 front bar with Nismo intake holes, oil cooler exit air holes on the sides and tow cable attachment on the front, with Rio in used good condition for $350 and R32 GTR Std side skirts in just painted condition for $150 the four pieces Hope this might help Jetman

Does it have one or two scratches going up and down the window?? IF it does, take off your door trim and repair or replace with new window adjusters, or even re-adjust or tighten the top adjusters. The trim might not need replacing at all. If you take off the trim and observe the window going up and down, see if the adjusters are the problem of the scratchings. This is usually the problem. Hope this helps.

Ive got a perfect pair on my car for $750 in blue, undamaged, in Newcastle, they were black once, now pearl blue.

R32 GTR ABS unit $150 + delivery, Check my post if you need other items

Don't stress, Both types will work fine. The one with just the springy wire sticking out, i also have on my 94 GTR and the one with the carbon conection i had on my 90 model spare GTR engines. some coils come with springs, some come with carbon connectors. I have used both and had no problems with at all with either. i do have spares for both if you are that worried. Hope this helps

$15 plus freight. from Newcastle

Ive got a GTR one which im 100% sure it will fit $300 pick up tomorrow if you want in Newcastle area.

GTR or GTS???? Different on the Quarters. I have a Genuine Greedy body kit, sides and rear extensions for sale. $1500 new. sell for $900, pick up BNE or you pay postage. Still on car and in great condition. PM if you have GTR and want pictures. Jetman

I'll check for you tomorrow. sorry champ A/C compressor sold.

I have both front windscreen vents in great condition with clips, only slight problem is the postage. I'm after $20 for both but the postage to Melbourne will be $10 parcle post if it fits. The length of the longest one might not fit in a parcel post bag with protection around it. I'll look it up tomorrow and see if we need to send it in a carboard tube.

You can have the vent for free as it's slightly damaged and have the R32 GTR master cylinder for $170, pick up or plus delivery.

That would render the ABS unit U/S. if they where taken out, I'll sell you one of the units for $80 plus delivery if that will get you out of trouble. Hope this helps

Hi Mate The whole surround for $10. where are you located as postage might cost about $9. If you are local, Bne then you can pick up ASAP!!!!!

I Live in MEDOWIE,. Just north of NEWCASTLE, NSW 0401 148 767 GENUINE INQUIRIES ONLY. NO TIME WASTERS, PLEASE. INTERIOR; GTR R32 Front drivers seat for $300, Fixed back BRIDE racing seat, Carbon re-inforced just retrimmed, side mounting set-up $700, GTR R32 passenger door trim $150, rear lower interior trims 2x GTR and 2x GTS $70 each, r32 coupe' floor carpet x 2 $80 each, GTR R32 hood lining x 2 $80 each, R32 instrument cluster surrounds with switches x3 $80 each, Dash Facias, GTR and GTS x 3 $70 each R32 boot and fuel cable $45 2 x steering columns $60 each, R32 bonnet cable $30 Air conditioning parts, vent motors $30, electronic control moduals $150, ducting under dash $15, sensors $20 each. Std GTR P/S, 4WD computers and amps that sit under the parcel shelf, $ 50 each STD R32 GTR computer and chipped GTR computer, $100 std and $200 chipped MECHANICAL R32, 33 and 34 GTR TOMIE intake piping with K&N filters, $300 the lot, R32 GTR STD CRANK, $350 Stainless steel 3 inch one piece $450 (nice gold colour now) picture below std Nissan pipes $30 each, std plastic GTR BOV return pipe $50. Item: 5 speed R32 GTR Gearbox and transfer case. Price: $950 ono ATTESSA control solinoides, the front mounted ones and one rear mounted one, $100 each 2x R32 GTR TURBO's High flowed for 350hp, Hi flowed by MTQ (old Turbo Torque at Archerfield, QLD), with largest ompressor and metal turbine wheels you could fit at the time of rebuild, improved bearings, new everything and in perfect condition. rebuilt in 2003, wrapped up in plastic and preserved from moisture and dirt and checked regularly. both are in brand new condition, used only for 2 mins to find out that the oil ring on No6 cylinder had broken, then taken off and never fitted again to anything! $2000 neg on this item, as they cost $2300 just to highflow and rebuild Turbos also come with Exotic Exhaust custom made stainless headers ( i think they are about 2 1/4 inch dia), and std GTR dump pipes, and std wastgate actuators. BRAKES $100 for brake boosters each (tested and not leaking), and $100 each for the clutch boosters, brake master cylinders $100, clutch master cylinders $100 2 x 300 zx twin turbo front calipers, 2 x R32 GTR front calipers and 4 x GTR rear calipers. Price: $700 the lot for GTR front and rear calipers, and $400 the 300zx fronts EXTERIOR R32 GTR Trust Gracer side and rear aero trimings, genuine original item, paid over $1500 for the lot new, sell the lot for $650. or $450 sides and $200 rear R32 GTR front guards in perfect condition still on road car for $650 pair or $350 each, or slightly damaged GTR alloy guards $100 each. Repairable. a lot cheaper then new, if you can get them still ?? SUSPENSION R32 gtr gts4 upper and lower suspension control arms front and rear, front lower arms $50, rear upper $100 each ONO, front caster arms for GTR and GTS4 $60 each, TIRES 2 x 275/40/17 Goodyear Eagle F1 GS DOT 6mm tread $300 pair, 2 x 255/40/17 Yokohama DNA GP E-Spec DOT 6mm tread $300 pair 2 x 315/35/17 Yokohama semi slicks. (sticky) 3mm tread $250 pair WHEELS 2 x 17x 8.5 Manaray one piece rims (silver ones) off set =33 $300 pair won't fit over Brembos 2 x 16 x 8 Melbar GG7 very light weight rims (grey ones) off set = ? fitted a r32 gts with Mickey Thompsons on them $250 for the pair 1 x 17 x 8 Volk Challenge F-Zero off set = 33 with 245/45/17 Dunlop Formula FM901 tyre with 7mm tread $200 ono cheap stroker kit for RB25 Does anyone have one of these rims lying around???? Size is 17 x 9, offset = 32 for a R32/33 GTR If you are looking for any small, or hard to find items for a R32 GTR/S, that you can't find at wreckers or is lost or broken, then i might have it as i am a bit of a horder. Give me a call or PM me explaining what you need as i have a lot of extra stuff that is hard to find or expencive to replace. Hope i can help any of you with any problems or queries. Keep the Pm's coming as i am needing to find homes for the things that i no longer need. All items were kept for spares for my car, now i've taken it off the road, i no longer need them. CHEERS JETMAN

Try windscreens obrien and/ or SSS in Sydney???. R32 gtr/gts front windscreen cost was around $200. More info needed in your post header and you might get some more people that have r33's responding. hope this helps chow

i've got std brake lines for gtr $50 the front and im sure i have some spare straight hicas arms, $110 the lot delivered. I'll have a look tomorrow if you are still interested. Chow

radio brackets $15 delivered. chow

I've got one also. $150 delivered off my R32 gtr. Pm me with contact details if you are still looking, chow

I have a pair of R32 gtr and a pair of z32 front calipers. there is only one part number difference between them, the gtr's ending in R, but i know that they will both take a 32 mm rotor, yet the gts one i am unsure of in the r33 model. The r32 gts' rotor would not fit a 32mm rotor only 30mm, so do a bit of investigating and hopefully you will find the right size you need. Oh, by the way, i can sell you my z32 calipers for $300 the pair and the GTR's for $400 the pair. GTR calipers have been painted 2pac candy apple red, rears to match if required. Hope i can help in any way I live in Qld so postage would probably about $25-30 ????? Chow

ive got the lot, top and bottom std gtr r32 brackets with mounting rubbers off my car. the parts that mount to the rails, (bottom) and the parts that mount to the bar, top. $100 delivered to you.

Ive got the both, clutch and brake pedals and mounts/ assemblies for $100 the lot. pm if interested.

i've got an excellent condition valley cover for $150 + delivery

A gtr tank will fit gts, t and gts4. you just have to move one of the support bands that hold the tank in, to the new position on the floor plan. The rear end/ suspension cradel has the hole for the bolt, all you have to do is remove the spare wheel out of the boot and you will see the hole for the original gts mount with tank still in, and to one side, i think the left, the pressing/ casting/ mounting for a gtr fuel tank, about 4 cm away. drill a hole out to fit a mounting bolt and make either a 2.5cm square for support with a nut welded to it, or just get a good size thick washer. I used a 3mm thick 25mm square piece of flat painted steel with a nut welded to it and mounted it straight up. it might get a little difficult for you to stop the nut from turning in the boot, whilst tightening the bolt under the car. a friend would come in handy if available. hope this helps. This will not work if you have an exhaust that points out of the rear at a 45 degree angle, clearences might be an issue there, but will with std exhaust mounting. Cheers Jetman