Jump to content
SAU Community

tdsepco

Members
  • Posts

    22
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by tdsepco

  1. Don't stress too much. Take it to a smash repairs joint. Get it diagnosed/repaired. Get a wheel alignment and ask for the printout with all the specs and go from there. Might need a camber and castor kit too.
  2. Hi. I'm getting a rough feel on the clutch pedal near the middle/top (near the friction point). It's an abrasive/vibration type feel and sounds a bit like two pieces of dry metal scraping against eachother. Any ideas what this could be?
  3. How driveable are the Jim Berry clutches compared to the stock clutch?
  4. Are you having any troubles with your clutch? slipping at all? any noises?
  5. Hey Guys. Have you checked the diagnostic LED in the bootlid for a code on the problem?
  6. Anyone out there have a Carbon Clutch like ATS, Exedy, etc... in their car? if so, what are these like compared to standard aftermarket clutches.
  7. Hi Guys, I'm having a problem with the Attesa system. The 4wd light is on and the diagnostic led on the box in the boot flashes 18 times to indicate a fault in the ets pressure switch. Any ideas on how to fix it? Thanks.
  8. Thanks. Are there any pre gapped ones? What's the best way to go around gapping these? Also, what's the diff between BKPR and BCPR?
  9. Hi Guys, What's the NGK part number on the copper plugs for the R32 GTR? 0.8mm gap. Thanks.
  10. lol. well, not sure, it's probably done 150k, 250k even but a few mechanics have said the car seems to be around the 70-80k mark though the clock reads 50k. So what kind of service would you recommend? I've come up with the following so far: - Coolant flush - Spark Plugs/Leads - Oil and Oil filter (Done) - Gear Oil (Done) - 4wd fluid flush (Done) - Fuel Filter - Compression test - Injector Clean - Vacuum Hose Upgraded to Silicone - Tuning/Dyno Anything else?
  11. Hi Guys, I've decided to save some money and learn about my car (R32 GTR). So i'm going to start with a service. What is usually done/needs to be done at 50,000k's? Thanks.
  12. Hi Guys, I'm after an instruction manual for the Blitz E-SBC Boost Controller. Anyone have a copy or know where i can get one? Thanks.
  13. i'm not sure on sau's policy, if this post is against regulations feel free to delete. but i can make up custom stickers, so if you need anything feel free to pm.
  14. Hi Guys, The organic (piece of shite) clutch in my 32 gtr is starting to slip badly. Anyone have or know of somewhere i can get a cheap/decent clutch? Thanks.
  15. Hi Guys. I'm after an ARC Airbox for an R32 GTR. Anyone know where i can pick these up? any second hand ones? looking to buy within the next month.
  16. I have stock R33 GTR Wheels with Bridgestone Grid II Tyres. How much would you be looking at paying? I may be swapping these with someone else so if the deal doesn't go through i will be looking at selling them. Also, i am after the stock R32 GTR Wheels if anyone has them at a cheap price.
  17. any cheaper ones out there? right now i have r33gtr wheels and bridgestone grid-II tyres (245/45) that still have a lot of tread. if anyone wants these and has r32gtr wheels & tyres please let me know and we can arrange something.
  18. WTD: Stock R32 GTR Wheels + Tyres (Pref). Please PM with prices, pics, etc... thanks guys.
  19. tried rotating the tyres but the prob is still there. i need new tyres soon anyway, should i get the new tyres then investigate further if the prob is still there? if it's still pulling to the right even after new tyres what else could it be? also, what tyres should i get? i'm using stock r33 gtr wheels and want something with decent ride comfort.
  20. thanks. how would i go about checking out the rails and steering rack? how much are replacement rails?
  21. Hi. I have an r32 gtr and it's pulling the right, most noticeable under heavy braking. Had the control arms replaced, and the wheels aligned but it's still pulling to the right, less than before but it's still there. any ideas? thanks.
×
×
  • Create New...