konect

*Refer to previously sent response* Realistic offers only please Remember its a full kit not just the turbo.

Thanks man, will look better with a new low mount haha. Someone buy this kit! I am open to offers and neeeeeed to sell it

Hello gents, Need all this gear gone ASAP so I can organise my new turbo and get my car on the road finally! Details are: Genuine HKS highmount manifold (RB20, may fit RB25?) - Purchased new a couple of years ago and in perfect condition. Genuine HKS 35mm wastegate - Comes with screamer and the usual goodies HKS 2835 (Has been rebuilt with new HKS core and high flowed) - This turbo has done less than 1000ks since undergoing a rebuild with a brand new HKS core, and was also highflowed by the rebuilder (even though it wasn't asked for >.<). The rebuild was due to cracking a piston in the old motor which destroyed the exhaust wheel. The turbo itself was operating at 100% prior to this. Rebuild was done by Eastern Turbo Chargers in Bayswater and unsure on the highflow specs due to previous owner not keeping the details. It made 193rwkw @ 13psi on my Ceffy with exhaust leaks but I didn't push it further due to lack of supporting mods. Also included is: Turbo lines Intake pipe (without pod filter/AFM) Custom dump and front pipe (has location to plumb gate back in if required) - Needs a new gasket on the plumb back to the front pipe Asking $2500 for all of the above. It's a perfect bolt on option with no stuffing around organising parts. I can be contacted on 0412 033 449 for interested buyers. PICS: Cheers, Ryan.

Need this gone ASAP. Have found out that the manifold will also fit RB25

Classic post...welcome to the other 100 or so Cefiro owners without this part

Its still around...take it away

No worries mate. Need this gone ASAP so I can get my car on the road! Open to REASONABLE offers, don't low ball me or I will send a lovely reply

haha DO IT

Currently came on ~4-4.5k but that was with exhaust leaks and low boost. Could probably get it to come on around 4k depending on boost level.

I have a solution for you...if you buy the kit I will wrap it in tinsel

Yay! I've lined up all these parts now, thanks guys for your assistance No doubt I will have more parts to come shortly...

How much did it cost you? Nisswreck seem to be quite pricey :S All the good stuff is in SA haha

Ok, previous owner doesn't know the specs of the core but it was done by Eastern Turbo Chargers in Bayswater. I remember the story was that they highflowed it without his knowledge and then said thanks for the money. In any case, I would assume it has stock 28/35 specs and then you can be surprised later

Hey Roy, Since I've had it ive only made 190 on 0.8bar due to injector and AFM restrictions. As for the high flow I'm not 100% sure as it was done by a shop when the motor went on the previous owner. Ill msg him and find out more details

Reminds me of my old car, oh how I miss it. Good price on this one though mate

Hey all, I am after the following items for my ceffy: Front indicators (standard or crystal) Grill The plastic pieces that go across the base of the rear door (where you put your foot :S ) That's all I can think of for now, if anyone is stripping please let me know Ryan.

Hello gents, I had my manifold up for sale but have decided to sell the whole kit together and move to a smaller turbo. Details are: Genuine HKS highmount manifold (RB20) - Purchased new a couple of years ago and in perfect condition. Genuine HKS 35mm wastegate - Comes with screamer and the usual goodies HKS 28/35 (Has been rebuilt with HKS core and high flowed) - This turbo has done less than 1000ks since undergoing a rebuild with a brand new HKS core, and was also highflowed by the rebuilder (even though it wasn't asked for >.<). The rebuild was due to cracking a piston in the old motor which destroyed the exhaust wheel. The turbo itself was operating at 100% prior to this. Also included is: Turbo lines Intake pipe (without pod filter/AFM) Custom dump and front pipe (has location to plumb gate back in if required) Asking $2600 for all of the above. It's a perfect bolt on option with no stuffing around organising parts. I can be contacted on 0412 033 449 for interested buyers. PICS: Cheers, Ryan.

Hello gents, I had my manifold up for sale but have decided to sell the whole kit together and move to a smaller turbo. Details are: Genuine HKS highmount manifold (RB20) - Purchased new a couple of years ago and in perfect condition. Genuine HKS 35mm wastegate - Comes with screamer and the usual goodies HKS 28/35 (Has been rebuilt with HKS core and high flowed) - This turbo has done less than 1000ks since undergoing a rebuild with a brand new HKS core, and was also highflowed by the rebuilder (even though it wasn't asked for >.<). The rebuild was due to cracking a piston in the old motor which destroyed the exhaust wheel. The turbo itself was operating at 100% prior to this. Also included is: Turbo lines Intake pipe (without pod filter/AFM) Custom dump and front pipe (has location to plumb gate back in if required) Asking $2600 for all of the above. It's a perfect bolt on option with no stuffing around organising parts. I can be contacted on 0412 033 449 for interested buyers. PICS: Cheers, Ryan.

Hey guys, I have decided to move to a low mount manifold to try and help me get this car registered finally so the HKS has to go. It was purchased new and is approximately 2 yrs old. Currently I have a HKS 28/35 on it and I believe it is T25 flanged so perfect for turbo upgrades, and also has external gate port running 50mm HKS gate (not included). Currently it is still on the car so I don't have any great pics but can attempt to take some this weekend. Below are some crappy pics. Pickup in Narre Warren VIC - Asking $1000 as its in perfect condition and these things are $$$ new Please feel free to call me on 0412 033 449 if you are interested. Cheers, Ryan.

I will sell if someone wants to buy, but still planning on getting RWC, just need to get some time to organise stuff for it. Going to change the turbo to low mount which should help a bit Will give you a call soon about the parts.

Ryan's statistics: Number of cefiro's = 1 Number of registered cefiro's = 0

Not at this stage as it's too much of a hassle. If it doesn't sell I will just keep it for now. Will list it if I am going to part.

Hey everyone, Decided to chuck my car up for sale to put the money into a new business. Looking for $12,500, details below: http://www.skylinesaustralia.com/forums/19...12-t245129.html Cheers, Ryan.

Hey guys, Going to chuck my car up for sale to put some money into a new business. I have only owned this car for a few months and was planning on making it my daily slider, but going to go in a different direction now. It was built by a guy in Perth using all Jap brand parts (see below) and was bought by a mate of mine and I bought it off him recently. Since owning it I have fitted the Regamasters (in the pics) and started getting it ready for RWC by cleaning up the engine bay and painting a lot of stuff black to pass RWC I am looking for $12,500 as it is about the value of the mods on the car. If it doesn't sell I will proceed with my plan and keep it, so if you low ball me you will get a lovely reply EXTERIOR: CA31 Chassis - July 1989 Build Manual conversion Final Konnexion Body Kit - Genuine Kit - Only kit of its kind in Australia! M-Sports 30mm Flared & Vented Front Fenders - Genuine Rear Guards Flared by 15mm Full Respray in factory Diamond Black Factory Sunroof Late Model Tail Lights Kaixon 6000k HID Headlight Kit Legal Tint with Front Banner Notes: Bodykit was drifted by the guy I bought it off and is in good condition except for the rear passenger skirt but is an easy fix, just needs some glassing. Drivers door has a scratch from when the front bar came off. Small blemishes but otherwise excellent condition. ENGINE: RB20DET - Recently changed over after Bee*R limited destroyed a piston HKS GT2835 Ball Bearing Turbo Kit (highflowed) ONLY 1500km since rebuild! (Went bang with old motor) HKS Tuned Length Stainless Highmount Manifold HKS 50mm Race Gate (1 Bar spring installed, other springs come with it) Xtreme Chrome Moly 5.5kg Flywheel (6,000km old, new bolts used) Xtreme 9 Puck 25% Over Standard Clutch (6,000km old) SplitFire Coil Pack Kit for GTR (6,000km old & originals included) R32 GTR Coilpack Loom (6,000km old) Braided Lines where necessary, Fire Retardant Shields on All other Lines ACL HeatSheild around Exhaust area 3" Dump Pipe w/ Heatwrap 3" Turbo Back Exhaust. East Bear GTR Cooler Kit & Piping (original white cross pipe included) Custom Stainless Intake Cross Pipe (By C-red Tuning) R33 GTR VSpec Intercooler Trust 50mm Race Blow Off Valve** Trust 10 Row Oil Cooler w/ Braided Lines & Spin on Adaptor Bosch O40 Fuel Pump with Source Power direct from Battery Nissan Steel Exhaust Header Gasket w/ new Nissan Studs and Brass Nuts (6,000km old) Quality Blue Silicon Used on all joins and bends Silicon Vacuum Hoses Silicon Radiator Hoses Razor Grounding Kit Oil Catch Can Retuned Standard ECU - Socketed ROM (in Japan) Had car dynoed recently and made 192rwkw on stock boost. Needs about 1.2bar to be efficient DRIVETRAIN: 2-Way Mechanical Diff (Nice and quiet) Gearbox Had 6 Bearings Replaced 6,000km ago R32 Half Shafts installed HPI Braided Clutch Line Brand New Speedo Cable UNDERNEATH: Tein HA Coilovers (Purchased brand new in 04, 30,000km old now) Tein Castor Rods Castor Rod Mount Brace Cusco Front Strut Brace Adjustable Traction Rods in Rear Adjustable Upper Arms in Rear HICAS Lock Back Drift Pineapples on Rear Cradle Desmond Regamaster 17 x 8 (Lightweight) and 17 x 9.5 Brand new Falken 452 on the front and good tread Federal SS595's on the rear Full 5 Stud Conversion, R32 Rear & Custom Billet Front Hubs 20mm 5 Stud Bolt on Hub Centric Spacers on Front Z32 4 Pot Brakes & R32 2 Pot Rears in Red (replaced Rear Brake Lines) S14 Steering Rack & Custom Power Steering Lines INTERIOR: Sexual dash mat (extremely rare!) HKS EVC3 Boost Controller Greddy Boost Guage HKS Oil Temp, Water Temp & Oil Pressure Guages (all installed correctly) 6 Point Achieve Roll Cage Nardi Turino Steering Wheel Bride Zeta II (Driver) Recaro replica with genuine BRIDE rail (Passenger) Razo Gearknob Pioneer MP3 Head Unit Pioneer 6" Splits That's the gist of it I think. Only been drifted a few times and has heaps of potential to make big power. Car is fully complied and VIN plated fitted. Currently without rego, but as stated I was planning to register it but don't have the time, so would make an awesome street car or track slider. I can be contacted on 0412 033 449. Located in Narre Warren. PICS: Cheers, Ryan.

Also chasing the following parts to purchase!: Front bumper indicators Little piece that goes across the roof lining where it joins the back window ...more to come. Ryan