Tangles

get a proper boost guage, with free-flowing exhaust and cooler intake (weather) your boost would be more like 10psi Id suggest a SAFC to fix the issue, setup correctly on a dyno

I bought mine 5yrs ago, came into the country with books and legit kms if it hasnt got service history/books then bet your bottom$ the km's are not genuine

complete set of wilwood: http://cgi.ebay.com/ebaymotors/Big-Brake-K...sQ5fAccessories exactly that kit, same price (shipping was a hundred $ cheaper, AUD dollar vs USA / UK dollar is slightly down now compared to around 3months ago when I bought this kit) fits series-1 however longer wheel studs and 8mm(minimum) spacers required to clear most rims Ive fitted it up, no worries bar require the above (receive studs tomorrow, I hope) So got to unbolt, fit new studs, spacers, going to flare the guards with my ebay guard roller and test drive I fitted $10 speed bleeders to make it easy to bleed the brake lines by myself. Will report on how they feel and perform

Ive got a guard roller, come over sometime. Cost me a cpl hundrey on ebay, not used yet (will use this week - awaiting extended wheel studs to fit my wheels around the larger wilwood calipers) got a supercheap heat gun too, to heat the wheel arch paint so it doesnt (well, less likely to) chip for radiator, I went to natrad about 4yrs ago for a Koyo radiator, slightly thicker than stock.

thanks mate, looking forward with renewed optimism ambition is to get these legs strong to support the lack of stability / pain arranging interviews this week thru a govt. initiative to get ppl off disability pension & back into the workforce will only be looking for a 38hr per fortnight job, to get back into living. got to buy myself another house, selling current home - 10 christine street, morphett vale, $395k LOL, exwife gets half and otherhalf to my two young children after starting paying off my 1st home from age 17 Ive got to start back down the bottom. tbqh: would like to run for state parliament as an independent. going to look into it over the next 3yrs

amen westminders > st.peters oh and thanks for the support Ive received re: mental health thanks, means a lot to be perfectly honest anyone suffering depression and/or horrible thoughts seek help, please beyond blue.org.au 1300 22 4636 lifeline.org.au 131144 took myself off my anti-deps 2 weeks ago 'cause they obviously were NOT working, seeing head shrink tuesday stopped cigarettes well over a month ago along with maryjane; dont miss it one iota. however I do firmly believe prescription Marijuana should be made freely available to pain patients. ordering a Hasa carbon/alloy road bicycle. real keen to make some tree trunks (again) http://cgi.ebay.com.au/NEW-HASA-CARBON-ROA...=item5ad9ea3f6e cant swim, nor weights with no knees. with patellas couldnt cycle due to the bone-on-bone, but now with tendon-on-bone the cycling seems the best motion so, going to start slow with 10km rides and get to 60km rides hopefully (ie city&back, mt.compass&back - yup willunga hill is the goal) will take pics of legs prior to 1st ride, then after say 100 rides. mantrunks here we come again (used to be able to bomb a goal from outside 50m no worries, best goal was over Fitzy 60m out at Pt.noarlunga)

not for sale atm sorry

didnt get the GTR, been dealing with mental illness. not in best of shape atm, lucky to be alive atm tbqh

congrats mate Im off to sydney monday to buy an r33 GTR, car of my dreams!!!

yes. at the moment it has 555cc injectors, power-fc, yellow jacket coilpacks & z32afm's - untuned but these all come out next week when I get back from sydney with my new GTR, return to stock 'cause these parts stay with me. see original post for specification list. end next week will be stock GTR ecu, stock afm's, stock injectors & coilpacks, ready to drive away. will be an awesome project for whoever buys it, engine doesnt miss a beat. will update next week with photos and complete list once Im back from nsw.

selling this track car AND my Stagea will update thread next week after Ive picked up my r33 gtr Ive purchased photo's then

nismo super sports version for $1700ish, NISMO Super Copper Mix Twin Clutch Kit Skyline GTR BCNR33 with RB26DETT engine. (Sports clutch disk(Copper mix), Sports clutch cover, Light flywheel, Release bearing(Nissan parts), Nismo no: 3000S-RSR35-E same seller does me discount (jps trading) so could grab this option when needed. ta for the advice. needs to be light as a feather

ah thats the name. cheers mate. will get all fluids done with the timing belt service, might look for clutch prices (ie ebay. lol) realized Ive got way more than listed previous page, 30row oil cooler, etc etc. awesome

clutch, rb26 1997 - need it as light as possible (knees) but good for 300awkw suggestions please?

I'll be using these, AL7075-T6 Billet Aluminum they should be ok, will be going on a stock 1997 R33 GTR. Im picking it up on monday miday http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...e=STRK:MEWNX:IT once back on wednesday I will get plates/rego, and take my time to work on it. throw in my stagea saas seat 'cause of the extra long seat rail and put the gtr seat into the stag. 10mm spaces, 50mm long gtr wheel studs, my 17x7.5 mags with brand new ku36 tyres will go on, and the stag will take the gtr wheels. I NEED to sell the track car for what I got it for (7k with roll cage, stock rb26 engine) and will ready the stagea for sale. new Gates racing belt, idler, etc, hks oil pump, n1 water pump, 87mm mls cometic head gasket, full nissan gasket set, arp head studs, z32 afms, apexi hardpipe intake ati harmonic balancer, arp studs, tomei sump baffle, 555cc siemens, yellow jackets, p-fc, tuned length manifolds, hks split dump pipes, dual 3" to 3.5" front pipe then hold onto the hks cam springs and greddy camshafts, hks pistons/rods for later. then sell whatever is left and buy pair 2530 turbo's & some new shocks and rip skids really excited about owning my dream car! everything is good here now, so onwards and upwards !!!!

lol I just accidently bought a 15g R33 GTR going to sydney soon to pickup must sell the track car now currently fitting wilwood brakes, to put the brakes back on the r32. might end up selling the stagea if I enjoy the gtr too much. or vice versa

potentially selling for $6500 if you are keen for an rb26dett track car this'd be sweet. selling 'cause Im picking up an r33 gtr instead. make an offer, with or without engine

same havent been pulled over for near 10yrs now?

note to all - if suffering depression & suicidal thoughts please seek help immediately beyondBlue / Lifeline are there to listen/suggest/help

please hold for me, for a day. positive I'll buy them, must test fit these first to my car(s)

bwahahaha lmao gold comments are gold who said mumma loved me anyhow?

yep thats me ! ruby's number received, cheers

stock setup is NOWHERE near as good as the 4pot's from skylines. proven on street and the track massive improvement in braking force. have to disagree with you on this one Chuckie in the meantime, Im fitting this atm: http://cgi.ebay.com/ebaymotors/Big-Brake-K...sQ5fAccessories fits to a Series 1. however to make fit you must have the bracket bolts loose, setup caliper/rotor, bolt calipers up, then tighten the bracket adapter bolts otherwise the bottom bracket bolt head fouls on a little "hump" and it wont do up. then found out the calipers are wider than the skyline series, and my 17x9.5" +23 rims no longer fit. my 17x7.5" +32 rims only fit with 5mm spacers anyway, will redo the bolts on the LHS front tomorrow with locktight, then hitup the rhs front. thing is, just doing wheelnuts f**ks my no-knees hardcore. such a joke having no knees (almost killed myself last wednesday, sad but true, phone call stopped me, made me think, now to seek *more help for depression)

ku36 tyres and rjr mags not available will be 17x9.5" rims with 235/45/17 marshal tyres price - $7500

yeh I shave to a #1 every 12 weeks or so. easy costfree haircut can someone PM me rubyrs4's mobile number? need a quick chat with him