Tangles

brakes.... best deal I found around was the following, paid $869usd delivered for wilwood superlite 4-piston calipers, drilled 330mm rotors, metal lines, pads, bolts, & brake bracket mount. sample - http://cgi.ebay.com.au/330mm-200SX-Skyline...=item1c11584bd6 Ive put these on my R32 gtst sedan rb26dett Im doing up as a 2-seater track. Added speedbleeders for fluid bleeding ease. The stagea is using the r32 front gtr calipers.

ebay, air scoop $12 from hong kong I put one on my rb26 trackcar bonnet, over the airpods

vettel clearly moved the opposite way to the corner..... = dangerous driving ! he rammed straight into his teammate and at that speed there was no way webber could have reacted fast enough to ensure they didnt touch Id say that if webber had managed to move out the way he would have gone off track anyway such was the violence of vettels move into marks position

umm, yeah, he just stuck it up his teammate instead with a full on love-tap at 180mph what a bastard - took himself out of the race in a horrid display of 'undertaking' webber I hope vettel goes on for a shocking season whilst mark wins the championship.

congrats. 335hp with gt3076-iw .73ar 1.1bar (16psi) auto, remap + AEM F/IC-8, very similar results also in rwd

R32 gtst rear seats, seatbelts, A1 condition - $25 Stagea C34 series 1 drivers seat, no rail, A1 condition - $25 R32 gtst rear wing, silver with led brake light, good condition - $25 Stagea C34 series 1 front brake calipers with brake lines and 2x sets of 99%new pads - $100 need the seats and stuff gone.

Ive got OBX twin manifolds, tuned length, and the OBX split front pipe 2-into-1, for R32 RB26dett. Weld quality is excellent, they give it a lifetime warranty. The header manifold pipes, whilst small to keep to stock position, look fantastic quality. Cant fault the front pipe either. Just need to fit, along with twin hks split dump pumps and a decat flex pipe Ive got here. Hard @ 6'8" with no physical knees tho

$449usd for a set of 6x Deatschwerks 750cc http://www.deatschwerks.com/catalog/produc...products_id=116

looks like the ones. part number 195500-1370 11mm low impedance sorry I threw away the packaging. plus Im sure I got away with a top price, should be around $600 for a set delivered.

my rb26 injectors were all leaking searched ebay.usa and bought a new set of 6-denso siemens 550cc for $363 delivered. thought that was a decent deal. set up easily via power-fc

the $175pound greddy grex n1 camshafts are new !! woot. the $30pound 2piece stich evolution mags will come up v.nicely after a respray.

yup, should have just got the cage cut in half and airmailed.

doh 1st time Ive been f**ked over by one of 'em and yesterday doing up my epic bargain wilwood racing brake set I snapped the bleed screw assembly by overtightening the speed bleeder grr

on that note - DO NOT buy a roll cage overseas. unless they cut the main bar, you need to ship it. but because I had the cage, i added mags, cams, more parts to make it worth my while. but fees from the docks is outrageous. they hold you to ransom. if in didnt pay the release fee they'd hold the goods (storage fees) then dispose of and still bill me.

Id like to see webber sign a 1yr extension to RBR. I think he is a real chance for the drivers world championship this year and perhaps next. After that (the glory) take the top $ drive.........

have you got a blow off valve that vents to atmosphere? if so that is the culprit. Ive got yellow jackets on the rb26, and splitfires on the stagea rb25.

what a jip. bought $1800 worth (incl. shipping fee) of goods, sent on pallet via boat from a japanese port to adelaide had to pay all up an extra $1100 to get the goods released. what a jip. so many fees and charges to receive a shipment Id paid for.

no. 350. too low, go up 5 allround .

tell them tangles (big brendan- stagea) wants his safc&sitc back that got stolen by troy.

yes, my stag is quick. auto is going fine. stagea is loving the 335rwhp its producing little bit of lag down low, but makes it good to drive off boost, and comes on nicely. if I come across 5g laying around Id love to finish off and do the bottom end of the engine. as is car plus mods = 50k now, over time I plan to drop a built rb26 into it. got all the parts for that, just need the $ to do the work

perhaps buy a RB26 engine and build it up, drop it in? make a project out of it....... a gt3076 sure is nice, dial out the lag as much as possible and it will be quick on the road. it may just be that its time for something else ? does the budget approve a cheap 2nd car ie 10g r32 gtr ?

nice result. what do these PU highflows cost? any more specs you can share? ie journal or ball-bearing core. size of comp/exh wheels

siemens 550cc injectors for 400hp, or 650cc for 450hp. links as per my pm. walbro 255lph pump for $150 fits intank. bosch 040 intank for $200 isnt that loud really. hypergear turbos are journal bearing. for $1500 + you get into the ball-bearing Garrett range. a GT3076r bolt-on for skyline 6-bolt housing is the way to go for 400hp. get your current stock turbo highflowed to a gt3076r either bill at ATS marion rd, or stao at hypergear - get some quotes for a bolt-on upgrade. horsepower inabox sells a bolton for $2250, ATS for around same price. garrett ball bearing good for 270kwaw nismo adjustable fuel pressure regulator if you feel the need, around $150 prior to getting the nistune ecu tuning. ~ or go all out, grab a twin turbo manifold kit for the rb25 and grab 2x gtr turbo's

Im lucky. Whilst I moved out of home end of yr12, worked & started on a small 1st home, always kept close with the family tho having grandkids has meant the world to the Olds

do it mate family IS important no matter what.