SNG

Hi everyone, I have done a search, but have been mostly finding results on people asking about fitment of GTR Fuel pumps in other cars or other unrelated results. As far as i can see they have part numbers, however does anyone know or has tried whether or not a R33 GTR Fuel Pump can be used (straight fit or otherwise) in a R32 GTR and vice versa? Any help appreciated. Cheers. SNG

Hi, Just got these installed on my car, as Beer Baron says u can only get max -2degree adjustment out of them. When i was deciding between the noltec one and the jjr one it was a fairly easy choice. You should have a read of SydneyKid's thread on upper arms, very informative read. http://www.skylinesaustralia.com/forums/in...showtopic=91064 Hope that helps. Stan. Woops, too slow in my reply.

Hi guys, Just after peoples opinion who have tested Toyo T1 R's and Falken RT615's, what would your thoughts and feedback be on each compared to each other only. Dry/wet, overall. Im deciding between these two and need peoples experience to sway me to one over the other. Thanks for your input. Stan.

Hi Guys, Still after these, anyone got a set they wanna get rid of? Thanks!

Hi, Im after a set of the R32 GTR Standard Strut tops, any one got a set or can point me in a direction where i could source some. Thanks, SNG.

Hi guys, Sourced something else. Thanks everyone that helped. Cheers, SNG.

Hi, Im after a set of the R32 GTR Standard Front Camber Control Arms, any one got a set or can point me in a direction where i could source some. Thanks, SNG.

Hello everyone, Wondering if anyone could tell me which side i unscrew to remove the braided line? The top side (factory line - circled blue) or the bottom side (the fitting attached to the braided line - circled red). Im not sure if i unscrew the bottom one whether or not the fitting will come off the braided line itself. Cheers! SNG.

No worries, i didn't explain myself very well, its for a R32 GTR, but im running R33 GTR brembos on it, hence the misunderstanding, i should have stated that at the beginning. Its wierd because i called supercheap auto after and they told me i was looking at $107 for a set? and like i said above, repco had a listing for it too? so im not sure what to believe now. It does seem a little strange that they wouldn't have it for the brembos for the R33 GTR, perhaps they were just trying to get me to buy the EBC Greenstuff they had in stock instead for $250. Think i may go down to Supercheap tommorow and suss it out. Cheers! SNG.

Hi guys, Just got off the phone from someone at Powerplay, they said Bendix don't make ultimates for the R33 Brembo caliper? Seems a little strange seeing i managed to get a price for them from repco last month. Can anyone suggest another pad that do make them for the R33 Brembos? Or did the people at Powerplay get mixed up? Though he did specifically say that they don't. Cheers. SNG.

Hello, Do you know how much your friend paid for that size? Cheers.

Cheers! I'll go check it out! Thanks. SNG.

Hello, Sorry to hijack, but where do you get bendix ultimate for $120 im after some for the fronts, checked with repco last week or month and they wanted $180+ or something like that. Trying to find somewhere cheaper. Is $120 as low as they go? Cheers! SNG.

Hey guys, Yeah it definitely worked in my case, but as i mentioned earlier above, i incorrectly had redline superlight weight gearbox oil in it so i don't know if that made it worse than it should have and consequently it seems alot better now than what im used to with it. From memory i *think* it was around 20 bux a bottle of 1 litre roughly from auto one? (You will need about 2 litres) I don't know what type of diff i have, but when i had it on the hoist, when i turned the rear wheel one way, the opposing wheel turns the opposite way, and the diff itself looks aftermarket compared to my previous GTR, i was told that i had an mech diff. It now almost feels like my last GTR which was stock, but i swear i can still kinda feel it giving resistance very minutely when going around corners. I just wanted to give some feedback from my personal experience regarding this oil, it may work in your case, it may not. Cheers! SNG.

Hello, Just to give some feedback, changed the oil over today to the Castrol SAF-XA Synthetic, beautiful stuff, fixed my problems immediately, no more clunking at all nor shudder through the car or chirping of the wheels going thru corners, recommend giving it a shot if your having problems like i did. SNG.

Hey, Don't really remember now as that was a while ago, but i just remember thinking that the headlights were a "brighter whiter colour" light than most headlights which are usually more "duller yellowy colour" if that makes sense. Can't remember if it was blinding, did you find there was much of a difference when you converted them? The standard lights on the 32 arn't very good. SNG.

I think the 33 ones must be alittle larger, because the ones i took out of my car are definetly smaller then the ones they have instore for P8140, i measure mine as 5mm height and 3mm width, is this the same dimensions as the ones u took out and bought? The ones they have in store for P8140 are 5mm width and something like 7mm?? or 10mm?? height.

Hey, Where these P8140 an EXACT replacement? or a different size? Ive been to 5 Dick Smiths and the P8140 they have in stock are all not exact replacements and are too big!! How long ago did u get them from them? The ones in the picture in the link look exactly like the ones i need but just arnt the same as the ones in the store??? Randy, are the ones u ordered online exactly like the ones u pulled out of the car? if they are i may order some online and see if they are the right ones, let me know how it goes please! Cheers. SNG.

Cheers! Was going to Dick Smith on Gore Hill trying to source some back light globes for the climate control buttons, they just cant seem to get the right ones in stock anywhere. What where you driving? I don't recall any skylines when i was on pac hwy. SNG.

Hello, Do you know if all the R32 dash boards are the same and interchangable between all the various models, i.e GTS/GTR etc? Cheers! SNG.

Hello, Where did u end up getting the new bulbs from? Ive been to 4 different Dick Smith's (W. Mall, Chatswood Big, Chatswood Small and Macquarie) and the only bulbs they have for the "Grain of Wheat" is the 5mm 12v 50mA one which is physically too big for the holder and don't look like the ones in the catalogue? Thanks! SNG.

Hello, Does anyone know if its alright to buy and use some sort of spray to loosen the filler and drain bolts? ive just about destroyed my tool, and bent the handle back and forth a few times and the bolt still refuses to budge, or will it contaminate the oil or loosen the bolt so it may work its way loose later down the track? Thanks, SNG. Also to ask another pretty stupid obvious question, it is counter-clockwise to loosen correct?

Hello, Can u please describe how you did this? Where is this return line located? Probably a big ask, but maybe if you have the spare time, you could create a new thread in the tutorial section outlining how you did this, which could be eventually stickied? Any help you can offer would be appreciated! Cheers, SNG.

Hello, Hows the diff feeling and sounding 2 or so weeks down the track? Also what kind of tool and size did u use to unscrew the bolts? I went to change the oil but to my frustration i didn't have anything that i could use to unscrew them, i will have to go and buy some, and help appreciated. Cheers! SNG.

Hey, your plates are AB ** ** something right? I saw your car coming off Forestway so i sped up a little to catch up to you and pulled along side you, but you didnt have much of a reaction so i didn't think it was you and i don't know your plates. Anyhow, have you got standard light globes in your car? They looked very bright and white in my rear view mirror.