GOT04

engin bays now xoxoox

2nd lot xoxo

1st lot of my favs hope u like xoxo

well both my power levels are at the wheels 280kws and 406nm of touque can i add more touque and still be safe?

you guys got any info on touque, ive heard that lots touque is more damaging to the bottom end then lots of power. i have 406nm of touque, so would adding more to that be ok? xoxoxo

pfft, some poeple have no idea just put it in, know one boots there car in the 1st 5 minutes of it running, it take bout 1 minite longer to get to normal working temp. you wont notice it till you on the track and your oil temp wont go over a surtian temp..... only install oil pump when your building the bottom end of ur engin and be sure to install a bigger sump. xoxoxo

anymore examples??

well i already have 280kws on 14psi, its not a daly driver, but i wnat to install cams abd be tuned from mid range power and touque. wont gain any more power as such but touque i will. not sure if its safe or not. i have bigger radators and a oil cooler for safety. im getting examples on other sites on cars making up to 310kws on stamdard bottom end and still going. this site would be the best for the info so, come on guys....... xoxoxoxo

i basicly wnat to know if any of your mates have got any rb25's making of the 300kw mark safely on a standard bottom end, curious to how strong they are..... give me a few engin spec in your answer plz thanks for the help xoxoxooxox

standard manifold, standard intercool and piping for sale dirt cheap

i have 280kws now on 14psi with a standard engin and its fine bashing it round a track, im putting a bigger plumium and throttle body on it next too, im not worried bout the engin.... mate of mine has 310kws standard engin.... a well looked after rb25 with all parted matched with a perfect tune on it can handle any power it makes, its just the boost u have to keep low xoxoox

why u selling? xoxoxo PM ME

Engine: RB25 STANDARD ENGIN STANDARD CAMS STANDARD HEAD Modifications: HKS TO4r Turbo KIT HKS super drager cat back exhaust (3.5 inch) HKS S type front mount intercooler (custom piping) Apexi AVCR boost controler Apexi Power FC Sard 850cc injectors Z32 air flow meter 600hp walbro intank fuel pump Power:1 bar = 279.6 kw @ tires 406.8 nm touque queensland raceway time.... 58's

Item: X force 3" stainless steal dump pipe, R33 standard manilfold Location: brisbane, boondall Item Condition: Dump pipe is from standard turbo to cat, has 02 sensor attacted, will bring boost on quicker and adds a bit more power. manifold is perfect con. i have all standard heat shealds Reason for Selling: have new HKS TO4r turbo kit Price and Payment Conditions: X force dump pipe $300 manifold $100 all together $350 extra infor: dump pipe is a great upgrade for any r33, dump pipe is a must have for the exhaust system, dump pipe brings boost on earlier and harder and add a little more power. Pictures: will have loaded up buy the end of day.... Contact Details: mobile 0401 047 460 or PM or e mail me on [email protected] xoxoox

turbo sold X FORCE dump pipe and manifold remain xooxo

price on turbo dropped to $400 need this gear gone................... xoxooxox

Item: R33 S2 turbo, X force 3" stainless steal dump pipe, R33 standard manilfold Location: brisbane, boondall Item Condition: Turbo has no shaft play (perfect) ran 1bar of boost through it for the last six months, got a 1/4 mile time of 12.79 at 115 mile an hour with 60 foot of 1.88 with this turbo. hasnt skiped a beat Dump pipe is from standard turbo to cat, has 02 sensor attacted, will bring boost on quicker and adds a bit more power. manifold is perfect con. i have all standard heat shealds and gaskets!!! Reason for Selling: have new HKS TO4r turbo kit Price and Payment Conditions: turbo $450 X force dump pipe $300 manifold $100 all together $750 extra infor: turbo is a great upgrade for any r32 drivers out there into drifting or a little more power Pictures: will have loaded up buy the end of day.... Contact Details: mobile 0401 047 460 or PM or e mail me on [email protected] xoxoox

Surf Board - 7" 6' (mini mal) Brand - Kirra Surf Location - Brisbane, boondall Other info - comes with protective carry cover and ocean and earth lead Condition - used 4 times Reason for selling - not interested in surfing Price - $300 Contact Details- jay harvey - mobile 0401 047 460 e mail - [email protected]

DMD, that who clearly did this car cause he is the owner of the business but i dont know off a few other company's that do it, there one guy that does it out of his van at ur house.... cost $200 for a mild pump

i have the same in mine from 3rd to 4th..... mine needs a rebuild of new box, doesnt happen often but clearly does happen, as it gets worse it will do it at low rpm, double clutching will make it last longer

the sycrow on my four gear is failing in mine..... not a commen problem but does happen

straight to the point what is the difference between tein super street coilovers and tein flex coilovers is flex for track/sprints racing??????? i tryed seaching on the tein website but its a dead website for info on anything.....

i went to all star once to talk bout a new turbo kit for my car, he asked for my number and said he would call, BUT he never did. yeah i didnt like that.....

bad news is all i have to say my brother inlaw 'had" a MY01 wrx, got a new 2.2L engin put in and a motec, now 101 couldnt get a motec for a 2001 model rex at that time so they put in a motec for a 2004 model wrx..... ended up with a shit tune and months down the track the engin blew..... another work shop fixed it, but motec had to chip the ECU for a 2001 model wrx.....

GOT04