Ahh32

SR20 drift club

I have a HKS 3037S, with an adapter piece to suit standard manifold and ext. wastegate

Hi, the apexi boost guage and contoller, is it a boost controller or a guage contoller. pics please

The Malapassi Fuel pres. reg. are heat sensitive and will vary pressures will the regulater itself gets hot. I fitted mine as far away from the engine as possible, and only get very slight pres. variations on hot days when driven hard.

Thankx meggala, can't affored $1500 4 pistons at moment. So just wanting to make sure that the 4AGZE ones will fit

hi guys, I am building and RB2.3 and before i pull my engine apart just want to clarify a few things. I am using a RB25 crank and rods with 4AGZE pistons from a AE101 levin, as i believe that these are forged & light weight. Now Question time: 1.The piston pin hole dia. is 20mm, is that the same as RB25 rods 2. 4AGZE pistons are 81mm, current bore size is 78mm. that's 3mm or a lotta thou. Is there enough cyl. wall thickness to be bored out that much, also. I have been told that there will be problems with cyl. flexing, just want to know people's personal experiece. I am going to 'Cryo treat' most parts of the engine, so hopefully that should cyl. problems if there are any. 3. Anyone know prices for 4AGZE pistons, must be from a AE101. Price for 1mm metal head gasket Price for 'Nismo' Big end crank & con rod bearings 4. 1 more, i am running a HKS 3037s turbo, any advise for camshft selction. Thanks in advance

I am chasing a set of 4AGZE pistons (new), with rings & gudgion pins would be much appreciated. To be used 4 my RB2.3 engine

I work at a Holden dealership, and yes there have been a few GENIII rebuilds, but worse than that is the attitude of the drivers. We had a VU SS ute in with a hole in the sump (alloy sump), we were going to replace the sump, when he rang up and said, "I'll just use some 'plastic metal' to fix her up mate." Bloddy cowboys. Another one who ran over a large, very imoveable object, (ripped open the sump) and kept driving until it stoppped. (another V6 dead). I will give one thing to the V6 supercharged engine.. they make a really cool noise, but that's it.

"The leaking P/steering pump?" "....and the 500 degrees negitive camber?" I have to work on 'Bombadores' everyday..... Lucky me!?

Punk & hip hop...... KIDROCK!!!!

Hi guys, I have just finished putting a turbo engine into my NA R32. Problem is that my 1/2 cut came with an auto, but a manual g/box was supplied. The problem is the wiring harness has different wiring for the auto and the manual. I am trying to figure out where the two sensors in the g/box connect to. I have looked at the old wiring harness (NA version) and connected them up to the same place, but Surprise surprise, no reverse lights.(fuses and bulbs ok) I am after a wiring diagram for a R32 Gts-t. Can't see shit reversing out of my driveway at 1 AM. Please HELP ME

Hi, i used to own a RGV '93 model. i sold it for $3500 2 months ago. So 4 $4800??? $4k maybe They have gone down a fair bit in price lately. Pushead, RGV's flog a NSR so stop wingeing

I AM AFTER A SET OF RX7 SERIES 5 550CC INJECTORS OF SLIGHTLY LARGER, AS A DIRECT FIT OPTION