vitz_n1

Bump

rb25 block and head sold

the ecu not programable though if im not mistaken? Its just more or less a mines re-map yeah?

thanks mate!!

coil packs are sold off the motor. $600, take it away, thats a bargin.

Its and exhaust cam gear.... but it can be used on either exhaust on inlet. located in melb - blackburn pm on contact on mob 0422 034 450 $100 firm

hahaha bloody hell 0422 034 450 im in melb - blackburn

RB20 complete motor, perfect working, out of my car so i know its sweet i.e. its not a motor that has been imported and sitting in the weather for who knows how many years. complete with manifolds, injectors, coil packs, alternator, loom and computer basically just EVERYTHING to drop in and go. could most likely get a g/box as well if required. The motor has 120 xxx k's on it and compression is all good. i tested before i pulled the motor out, quite a while ago now though so i've forgotten exact numbers.... from memory all cylinders were only had a couple of psi variance. $650m FIRM Call/sms or pm for any enquiries. I would prefer if you contact me by mobile but pm if need be. Ryan

coilovers sold. Pricedrop on RB20, complete with loom and ECU - down to $650 FIRM!!! thats a pretty bloody good price!! RB25 head $350 RB25 bottom end $250 or head and bottom end for $550.

Standard injectors sold. High flowed injectors sold. Head gasket sold.

bump - need it gone ppl, make some offers

been getting a few q's about the RB20. To clarify and save all the pm's, it is an RB20DET. and, The motor has 120 xxx k's on it and compression is all good. i tested before i pulled the motor out, quite a while ago now though so i've forgotten exact numbers.... from memory all cylinders were only had a couple of psi variance.

Hey Nathan, Ill get you a bucket load of pics if ya like. pm me your email address. Here are the rest of the answers, save me pm'ing 20 times. Motor was pulled apart as i bought it for a conversion, started and ran nice until i checked compression, and it was low in cylinder 2. The bearings were all fine by ear, i.e. had no knocks at all! However i only ran for about 5 - 10 secs before and then turned off and comp tested. (i had just fished the conversion and didnt expect the car to start and it just cranked after like one crank lol!). Turned out to have a cracked ring land. The bores all look fine, don't look glazed or scored.... nice cross hatch type pattern. I'll get you pics asap. Any other questions or further clarifying pm me. Ryan

Sorry mate, no turbo, it is the only thing not included...i could possibly get a turbo for you no guarantee's though.

bump

standard r33 injectors SOLD. feel free to make offers on the other stuff.

Also have a couple of things to add, I have a set of injectors for RB25 for sale, i'm 99% sure they are high flowed S15 injectors - the figure was 600cc. The reason i say 99% is because i bought them off someone and only used them for about 10 seconds of idle and thats it. I went to go test them to ensure they were high flowed but it was going cost me $210 to test them so decided against it, they are in fuel rail and due to my uncertainty am selling for only $200 FIRM! so an absolute bargin here for 600cc injectors. also got a whiteline rear camber kit for r32 gtst, brand new unused - $50

yeah just the rears mate.

The head does not have the exhaust manifold, i could possibly take it from the rb20 im selling but i wouldn't be thinking of that for a while yet.

rest of the pics.

Location is Melbourne - Eastern suburbs - Blackburn.

RB25 bottom end complete. crank, pistons, sump, water and oil pump etc.... (pistons not in block) $350 RB25 Head complete with inlet manifold and cams, minus injectors. Has brand new exhaust manifold studs. *note one stud is broken in and needs to be drilled out*. $400 Or buy the complete RB25 as above for $650. RB20 complete motor, perfect working, out of my car so i know its sweet i.e. its not a motor that has been imported and sitting in the weather for who knows how many years. complete with manifolds injectors alternator, loom and computer basically just EVERYTHING to drop in and go. could most likely get a g/box as well if required. $700 firm. RB25 1.2mm Tomei metal head gasket. Has been used BUT only bolted head down, tested compression by bridging started motor and then head taken off, i.e. def can be used again. $130 firm! is a bargin rrp is $350 HKS adjustable cam gear $120 firm RB25 crank angle sensor $70 RB25 standard injectors $100 RB25 harmonic balancer good condition $50 RB25 harmonic balancer with chip in it on the wall of the power steering pump groove (see pics) $25 Standard R32 intercooler with piping $100 neg RB flywheel - freshly machined and left to sit in outside so has some surface rust - shoouuld be able to steel wool it off. $80 firm. machining cost me $50. JIC r32/s13 rear coilovers, damper and height adjustable, good condition, no leaks or knocks. $350 Pipe with a flange that im pretty sure fits hks bov's, it had an old school hks bov on it originally. $10 RB25 cam cover $20 RB25/20 alternator good condition $100 RB25 body loom minus the knock sensor sub-loom $15 Standard r32 dump pipe $25 assorted RB engine mounts - also have a few more than pictured $10 each R32 accelerator cable $40 RB20 g/box shifter $25 RB20 afm, i was told by a mate it was a dead but seemed to be fine on my car after some contact cleaner so buyer, buy at own risk $30 more pics will be added tonight.

bump

As the title states im after the adapter flange for a turbosmart supersonic BOV for and rb25. Also after the plumback fitting/adapter as well. Call or sms me on 0422 034 450 or pm me. Ryan

Hey buddy, i have a complete rb20 with loom and ecu. 99% sure i can get you gearbox and turbo as well. Motor in perfect condition, came out of my car in favour of an rb25. Would come with everything just to drop in and rock and roll. let me know i your interested and ill and out about the gearbox and turbo and work out a price. Call or sms me on 0422 034 450 or pm. Ryan.