Jump to content
SAU Community

600hp

Members
  • Posts

    543
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by 600hp

  1. Hey guys for those that may want to know. We made 360awkw on 15 psi, and on 22 psi we made 450awkw. I was told to bring the car back in a couple of weeks with some new fuel in it. Then Jim will add some more boost and play with the cam timing as it was reset to zero. Also I'll stick the 4"exhuast on and see what it makes. The street exhaust is a 3"cat back. The power curve is much bigger now and the rev limiter has also been upped to 9k. Sorry no graph as i didn't bother printing one out as the car will be back there in a couple of weeks. Also for the people who don't know the T88-33d has a smaller inducer than the T04Z (they are both rated at 750hp) Jim also added the car should make over 500kw when tuned with more boost and the exhuast is fitted. Cheers
  2. Jim from CRD has told me before that they have made 520awkw with 700cc injectors. We will run about 60psi base fuel pressure.
  3. Have not got it back yet, you know how it goes. They said i should be done on monday, but we'll just have to see. I've asked if they can back off the cams so i get a good idle and yes i will loose a fair wack of power from it. I'm wanting the car to make the power with the turbo so i can have it as a nicer daily driver.
  4. Get it, it will hardly do jack for increasing lag!
  5. Hey guys the GTR is back around at CRD to finally get tuned with its single turbo. It did have a little tune when we put the T88 on it but it never had its cams retuned and it also didn't have its new cooler on it. The car has pon cams 260 Hypertune 100mm plenum and TB Trust 710 x 165 x 305 intercooler Sard 700cc injectors 2 x 044 fuel pumps ported head 4" front pipe into 80mm cat back for the street. Big airfilter setup I think thats about it for making power. Was hoping for around 450awkw on about 23 psi? Cheers
  6. I'm not sure why you think that sort of power is low. The stock cams in a 1uz are only about 220deg and 7.7mm of lift. the stock rev limiter is 6500rpm. The set has been built to max out the GK with a built motor.The 1uz don't have super strong rods like a 2jz, so you can't get thenm too much power. As for tlag once you take your foot off the clutch the boost starts climbing. no lag as such.
  7. Hey Guys thought you mght want to see how the V8 soarer that hypertune had on their stand at autosalon went.
  8. The guys at Gas motorsport made 1900hp out of a 3L heres The link. http://www.youtube.com/watch?v=im1oKedOV4s Hope that works.
  9. GT-SS turbos are a very good turbo.We made 367awkw with these turbos on 27psi rolling down to 21psi.
  10. Any pics of the turbo v8 soarer we had at our stand?
  11. The power FC is now sold with the air flow meters. The intake pipe is the common Trust unit that you get when you buy a single T78/T88 Kit for GTR. Please pm your email address and i'll send some pics. Cheers
  12. Power FC for R32+R33 GTR plus hand controller with Z32 afms lastest software version good condition $1250 Sydney Cast Trust inlet pipe for single turbo with two afms don't know how old it is. good condition polished $150 HKS twin mushrooms with their cast adaptors to fit stock afms. $150 for the set Cheers Ben 0413-559-300
  13. No one? what about a T78-33d?
  14. Hi guys, Just wanting to find out if anyone has really maxed these turbos out before? Cheers
  15. Do you have a plumb back bov? What computer are you running? and no you do not need a plate for more back pressure.Back pressure is the devil!
  16. Thanks for that!
  17. Hi guys, just trying to track down the factory cast bit which sits on the top of the plenum which holds the pulley for the throttle linkages. Cheers
  18. Thanks.
  19. Which plenum lost 2 seconds per lap?
  20. No one out there? Buster, are you using the E11? Cheers
  21. Hi guys, I'm getting an E11 this week for the GTR and was wondering what can be done with it? I'll be using the twin limiter function straight away just for the sound and the strip once we get back there. Also i'd like to use the nos funtion for turning on and off the fogger, just wanting to know what other cool functions people are running with there Haltech. Cheers
  22. Check out Hypertune for their plenums as all of the current fast GTR's run and the soon to be returning GTR-700 use them. They come in 90mm and 102mm. hope that helps
  23. I use Afterdarkspares for all of my fittings. They have the best prices and they can also make the lines up for you also.
  24. 300zx factory cable.
  25. Its an HKS manilfold, not the stock one.
×
×
  • Create New...