Import S13

I have the same rolling diameter all around and all 4 of my rims roll and ballence perfect and they are all the same offset and width. I had brand new tyers on the back for a month with the fronts being a little older and had no issues. I then changed to the same brand all around and all are new ATR's on the car with the same size tyers and still have this issue after having the drive shafts and castor rod bushings replaced. I drop the shaft and the problem goes away but I've put it back in as I didn't want to heat up the transfer case too much.

Got a vibration under acceleration and noticeable at anything over 40kmh. This has only started after I had a service and new castor rod bushings, front tyers and front drive shafts. I've tried putting the same tyers on the back and nothing changed. Tried pulling the front shaft out and the vibration is gone while it was out but back now that its back in. All the parts in the front end are tight. The stag is lowered and the new drive shafts sit on a slight lean, can this cause any issue? Can the transfer case cause this issue? Its a s1 RS4. Cheers

Cheers guys. Needs that little bit more lock and I'll be happy.

First time driving the car on a track I've never been too. All pictures taken my my girlfriend lauren.

3071r .86 rear, no shaft play, light chipping on front compressor blades but files smooth. $400 before Friday or swap for a go pro, contour or drift HD 1080

Looking for an r32 rb20 fan shroud as well as front guards.

Looking for a r32 passenger side front guard. Paint condition isn't an issue, cheaper the better as its for my track car.

Jaustech. My cars been there the last few weeks getting HEAPS of work done to my track car. They have gone step by step with me, kept me informed, and also let me know in advance pricing and so far, each thing has come in less than what they were expecting. Very happy with their service.

Deerfield DP by Work 5x114.3 15x8.5 -6 (full set of 4) 3 piece split rim. Barrels are in excellent condition, centers are in good condition, could do with a light polish. They have BRAND NEW tyres on all. They are my skid tyres that I was going to use for the rear but still not a bad tyre at all. Basically, my new suspension set up doesn't allow for these great rims so need to sell them. I haven't seen another set of these before as they where made for jap 4x4's but this is the only set I've seen and the only set I can even find on the net that suit a sedan PCD. $1300 ono shipping can be arranged at YOUR expense

Thanks Steve. If I can't find a standard one soon I'll hit you up. Thanks again.

WTB: RB25 turbo actuator

Looking for a metal intake for an r32 rb20

Real Garrett GT3071R, good condition, next to no shaft play. Rear blades are mint, front blades have some very small chips in a couple of blades but doesn't affect the performance of it. Came with a car I bought but doesn't suit my needs. Already off and ready to go, can throw in a stangard manifold with a spacer welded to it to suit the turbo but will need something sorted out to run an ex gate. Garrett GT3071R CHRA (Product Code: 700177-5023) Description: Turbo Charger model GT3071R CHRA 700177-5023 Compressor Wheel Inducer Size (mm) 53.13 Compressor Wheel Trim 56 Turbine Wheel Exducer Size (mm) 54.98 Turbine wheel Trim 84 $850 ono May swap for R32 suspension parts (except coiloves), oil cooler set up, or just something of interest.

R32 gtst drivers seat and rail in working condition. Good nic and no holes. $50 or a carton of beer

3071r .63 rear - $800ono (needs ex gate) I don't really know what these go for soooo. Used but decent condition, nearly no shaft play if any at all. Selling as it doesn't suit my needs but came with a car I bought. Will have it off the car next week at the latest. Will get pics once it's off. And can do a part swap for a full rb25 turbo set up (lines, manifold etc) with cash my way or a 2510 also after an AM performance RB dump pipe screamer so can part swap for that too.

Looking for a track car. Cheap as f**k, around $3k or less. Dont care of its condition or rego status. Looking for a 32, s13, 180sx or Ceffy. NO 31's, keto's, commo's etc Will take a complete rolling shell if it's what I'm looking for.

Stagea standard turbo back exhaust in good condition - $100 firm Clarion double din touch panel DVD player, used but in good condtion - $200 firm

I've got this DVD player that I don't need anymore as I decided to go single din instead so this has just been sitting around in the garage. It's used but in good condition. Just comes with the unit and the plug for the back with the cables and I'll throw in the cable for the areial adaptor and mounting brackets. $200 FIRM I'm looking for a FMIC and an EBC (newer stuff, ie Profec B, AVCR etc no old stuff) for my Stagea so can swap or part swap with some cash your way if needed. All the details of the unit can be found here: http://clarion.com/au/en/products/2009/multimedia/multimedia_source_units/MAX386VD/au-en-product-pf_1172419833216.html Pictures of the actual DVD player can be found here: http://www.nissansilvia.com/forums/index.php?app=classifieds&module=core&do=view_item&item_id=7319 SEND ME A PM AS I DONT COME BACK INTO THIS THREAD OFTEN

I've got this DVD player that I don't need anymore as I decided to go single din instead so this has just been sitting around in the garage. It's used but in good condition. Just comes with the unit and the plug for the back with the cables and I'll throw in the cable for the areial adaptor and mounting brackets. $200 FIRM I'm looking for a FMIC and an EBC (newer stuff, ie Profec B, AVCR etc no old stuff) for my Stagea so can swap or part swap with some cash your way if needed. All the details of the unit can be found here: http://www.clarion.c...2419833216.html Pictures of the actual DVD player can be found here: http://www.nissansil...em&item_id=7319 SEND ME A PM AS I DONT COME BACK INTO THIS THREAD OFTEN

Clarion double din dvd player Touch screen, used but in good condition, comes with Jap to Aus aeriel adapter $200 firm or swap for FMIC for Stagea/R33 or a new version EBC (can give cash your way for the right stuff) Details/pics here - http://www.clarion.com/au/en/products/2009/multimedia/multimedia_source_units/MAX386VD/au-en-product-pf_1172419833216.html

Steve Knight Racetech in Lonsdale. Has a 4WD dyno and builds insane track cars including a daily driven 500awkw 34 gtr and f**kloads of insane EVO's.

Clarion MAX386VD double din touch panel DVD player $200 firm bought it off someone and never used it. http://www.clarion.com/au/en/products/2009/multimedia/multimedia_source_units/MAX386VD/au-en-product-pf_1172419833216.html

What's the last day I can put my entry in? (if it's not full that is)

Hey, you wouldn't happen to have a set of coilpacks laying around?

Just sent you a PM bud Away for work at the moment, will be back tomorrow to send you the picture. Cheers