QUIKBLADE

Yeah ok, my bad... but... HAHAHA... Standard Cefi engine's suck... Poor you guys... Swap the Pipe for the R32 one incl. Intake Pipe and it's done...

wtf?... If you have an RB20DET that engine comes with a purge (BOV) valve as standard... it's plumbed back, naturally, because RB20 runs an AFM, if you put in a VTA BOV you will screw your AFRs and therefore have possible engine flooding and rich fuel popping issues. Blow Off Valve, Purge Valve, Pressure Release Mechanism, Diverter Valve... whatever you call it... it's the same thing.

Here you go... A Lot of cutting... and the cooler is from GK Tech and measures 600x300x76. Cheers Grant

My sub is installed with 2 spare tyres lying side by side in the boot supporting it so it doesn't move around when I'm sideways Can take pictures if you need a model of what I've done

Hey Bro... oooh right... MMMM Boost... MMMM Mine's Tuned ROM... Standard to run rich in the top end ... Hence my other thread running on here Dude... trade that Skyline and get your ass a Cefi again!! See that little Yellow ute thing outside of Campbelltown... I think he wanted to run us?... MMMMWWWWHAHAHAHAH!!!

Yeah, that would be me... local haunts... gotta love 'em hehe... you thought it was hot until you found out it was a Cefi? HAHA... Thanks man, I love Neutral Bay, just hadn't seen that part yet Yeah I recognised your car cuz I waved to you before when I was in Canberra on my way to Belconnon some time ago... Plus with your number plate... I guessed it was you ALSO SPOTTED: A.C.T plated black R32 Gts-t ... we travelled all the way from Sydney side of Campbelltown all the way down the Hume Hwy until I turned off at Mittagong...??

PFC... AP Engineering Version?... How come you changed to a Z32 AFM? The RB20 is an 80mm item isn't it...?? Torque?

Spotted Abo_Bob last night (Saturday)... Don't know where the hell I was, lost somewhere on Sydney's North Shore... but gave him a wave and he returned it...

Damn Hot... Front bar on your Cefi looks... well, not like it's fitting properly?? But I don't really care about that... GOT DISH? HELL YEAH... nice work... I like!!! giggity giggity goo!!

These Dr Drift chips... Anymore info to be found?

Hi-Power Racing, QLD - Rheinhard... Is the Shiz! Go full system instead of wasting time with a cat back IMO...

Hey, I currently run a Mine's tuned Rom... Which... after dyno runs, the tune looks LESS than perfect... I'm wondering what others run with what engine platform? Regards, Grant

DUDE, I've been looking for that EXACT same bar for ages...only place I found on was on the Japan Auctions (Yahoo)... Where'd you get it?... Yeah Looks like we both had the stock bar, but modified it accordingly... I tried to make it look like it "fit in" with the car, and a bit Jap Spec, so cut the numberplate part out, and 'relocated' the plate to one side (j-spec ) Nice car man PLUS, for those who've not had a standard bar to work with... that sucker from the number plate cuts back in to the body SO far it's insane... probably on a 60 degree angle, back in towards to main body of car... hence why FMICs look massive on these cars, with standard cut bars.

What do you mean?... An aftermarket front bar would be nice, but cash... ya know... Plus the lack of EVERYTHING except for URAS and URAS style bodykits, which IMHO look well tacky!...

Headlights... Hmmm, clean connector into back of headlight with connector clean... Then, if all fuses work, check behind you dash and your at the terminals making sure they are also connected. Foglights... there should be a switch on the right of the steering wheel next to the side mirror adjuster. Get back to me if presing that button doesn't work.

Hey guys, I installed an R32 GTS-T Hybrid Intercooler kit (600x300x76) and well... after some hard driving the other night, the engine bay was hot as all... **** but the pipes were AT MOST 4 degrees C... but when compared to the stock piping, which you still use a little bit of, it was still kind of hot, but maybe that was about 10 degrees C. So, FMIC... Highly Recommended!!!! Installed it with the help of a mate in my garage, and did the front bar myself (Very time consuming)... NEED TO CUT A LOT OF THE Standard Front Bar to fit it back on! NOTE: kit was for a R32 (RB20DET) NOT Cefiro. Please excuse the dirty drift pig look

Nice work... What's it running? Welcome to the forums.

Oh My God!... Ok... for all who want to know... the main screws holding on the front bar ARE: inside the front guard, directly under the blinkers about 2 inches down on both drivers side and passengers ALSO, the ones about 2 inches towards the wheel just inside the guard as konect said. The screws are 10mm and aren't too bad if you open the guard up, with the wheels off. otherwise on the bottom would be 2 10mm... AND all the little clips inside the bar... OH and on the drivers side... if your bar has never been removed, because it will usually break, there is a small white clip about 2 inches UP from that bastard 10mm bolt... Just punch it out. Hmmm now to figure out the FMIC piping install. Yay!... Bedtime... :yawn:

Just to add... I'm going through the issue at the moment, of me destroying my clutch pedal box... and FYI... S13 is too short... needs to be off an R32 GTS(T)...

Oh right... no I'm almost at that stange... but considering, I'm going to be putting it back on... I don't really want to F**k it... ya know?!... Hmmm, maybe I should do a "How to"... Just getting the Panadol and burbon out... and I'll shoot some pics and write a story...

Hi can anyone please check out: RA31GASMP-EC it's off my Nissan CA31 Cefiro... Unless it's the wrong number?? Thanks Grant

Hey Guys, Car has been dyno'd... issues galore, but now am putting on my FMIC and all the parts I've gathered... And well, I've struck an issue... Anyone have a HOW TO pull off the CEfiro front bar, as I've hit a snag... can't get the lights out... nor proceed any further with them in...??????? Can someone help? Thanks Grant

Spotted Grey 4 door R33 on Hume Hwy... Think between Liverpool and Campbelltown on Saturday... I was goin the other way... in My Cefi... ^_^

Dude... WTF?!... Sold Cefi and then... that thing?... What's the go?

Hmm, I read his post (for sale Oil Coolers thread), and he says that they are "not setup for use with thermostat". Basically sounds like to me, that you will need to purchase a thermostat from another source and figure out how to fit it yourself if you want to use one... ??? I will still be fitting mine up with a thermostat and I will even take a pic when it works.