Jump to content
SAU Community

GTR 94

Members
  • Posts

    708
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by GTR 94

  1. sounds like a plan although i will have a complete engine for sale later next month as well that was built for this car. will keep posted about the wheels although i would prefer to sell them with the car as then it wouldn't be a rolling shell. and to all the people asking bout the fuel set up if i do end up separating it i will post it on another page separately so we can go from there. but at present i am not separating anything just yet. cheers
  2. no worries mate. maybe in a few weeks if it hasn't sold as a whole ill start separating those bits and let you know
  3. Ok what we have here is a R32 GTR rolling shell with full interior all panels and glass complied registered. Originally I planed on removing the ABS, air con and manual gearbox, stripping the engine bay and re spraying and putting my complete set up in with all wiring hidden and full auto but have since lost interest. All I got up to was stripping the bay, welding majority of holes and high fill. The ECU runs a Map sensor so the original air flow meter plugs have been cut off the loom , but the rest of the full loom is there, boot cable is broken so will not release form in car but fuel release works fine, also rust under paint on driver door bout the size of 20 cent piece So heres what you do and don’t get, DOES NOT INCLUDE Engine Gearbox (can supply R33 GTR box with blown 3rd gear) Intercooler COMES WITH THE FOLLOWING BUT NOT FITTED ABS unit or front brake lines All A/C components (may be hard to fit as lines to heater box have been cut with hacksaw) Brake booster and master Clutch booster and master Rear Diff fully reconditioned new bearings seals Blitz blow off valves X2 HKS super dragger exhaust cat back All front guards lights, front bar everything missing from pics 3 & 4 Paint (for engine bay) COMES WITH THE FOLLOWING FITTED R32 GTR wheels with Re55 semi slicks All Brakes RDA slotted discs QFM K750 pads HKS hypermax II coil overs Autronic SM4 CDI 500R Advan surge tank Bosch 040 in tank pump Bosch 044 ex pump X2 Supporting Fuel lines Hi cas lock bar Battery in the boot All interior in pretty good condition apart from usual bubble in dash. Feel free to PM me anytime with any question or queries, any photos just send email address and I will forward them. also note im possibly willing to separate some parts if the person buying does not require them, BUT the interior and body panels will NOT be pulled apart. Cheers located north/west suburbs Victoria $12000ono Please do not tell me you can get a complete running GTR for 15,000 im not interested.
  4. yeah a lovely cover ^^^ yet still waiting for the game, hurry up already !!!
  5. got hundreds of pics if your seriously interested, and as for the article, not sure how that will help it sell. if ppl are genuinely interested i will be happy to answer any questions, here or via PM. and its silver. engine bay is in high fill here is a photo anyways (no longer comes with those wheels) R32 wheels
  6. yeah cheers krzysiu, and yeah maybe something with a 5 in it hey mxdori have fun in Japan mofo
  7. price drop 26,000
  8. hey guys thanks for all the kind words, she was a great car and if it sells will be sad to see her go
  9. reasonable offers welcome.
  10. gear box sold. anyone need a exhaust ?
  11. As posted in the title EOI unfinished project, 94 R32 GTR $30,000ono, and YES it is not running, if your seriously interested this could be negotiable. What you are looking at is a 94 model r32 GTR in need of a little TIME to get it back on the road, car is more a less complete. All interior, panels etc are here, only thing missing is a working gearbox, current box has a blown 3rd gear, an diff may need attention, was beginning to wind before car came of the road also no Air con, or ABS, it will come with all required parts but all lines were cut out. Ok so will start with the car still VIC registered and complied, it is all assembled apart from the front guards, bonnet, front bar and everything else in the engine bay, as at present the engine bay is in hi fill, and was meant to be painted but I have just had enough and want it gone, but everything is there. Car has and is assembled with: Hi cas Lock bar HKS hypermax coil overs R32 GTR wheels with RE55 semi slicks Pretty clean interior, apart from usual dash bubble Bosch 040 intake pump 2 X 044 pumps Advan surge tank all mounted and all functioning Autronic SM4 Autronic CDI500R ARC air Difusr Trust Radiator Boost controller/ turbo timer Ok so now the engine needs to be assembled (so you will need to get ALL gaskets) but reads as the following: Block is assembled with: Custom Aries Pistons Crower Rods ARP Mains Studs ARP Head Studs ACL Race Bearings Machined and prep block R34 GTR Crank all balanced and machined Trust Sump extention Greddy oversized Pulley Kit Ross Tuff bond Harmonic Balancer Trust Oil Pump N1 Water Pump Head is assembled and flowed [email protected] with the following Ferro 1mm oversized valves Tomie type C Valve Springs Tomie Pro Cam Exhaust Tomie Pro Cam Inlet Tomie adjustable cam pulley Inlet Tomie adjustable cam pulley Exhaust Single turbo set up Custom Hks T51R SPL BB Turbo Custom Hks Manifold to suit turbo Hks 60mm Waste Gate Hks V band Flanges HKS anodized pink funnel Garret carbon fibre looking turbo beanie 4 Inch Trust Intercooler 4 Inch stainless Exahust turbo back to cat NO water oil lines, (simply i didnt like they way they were ran so you will need to have your own made) Greddy Plenum Mal passi Fuel Regulator Setrab oil cooler with all lines Blitz blow off valves Not sure if it will come with a clutch cause Im not sure where it is at the moment, but will be able to sort something out sorry. Ok im sure there may be a few more things but that is all I can think of for the moment, all machining and balancing is all done, and this set up has been on the road before, apart from the oversize valves, that I have just had done. The car has featured in HPI issue 110 last year with the plates T51R. I wont lie this is probably a project for someone who has a bit of mechanical knowledge and access to a tow truck/car trailer. Realistically if you could spend 8 hours a day for 3 weeks on this it would certainly be on the road and driving. so here are some pics of the engine bay so you can see what your in for, if you want more photos of stuff or any questions please ask, but wasnt to sure what other photos to post. ALSO PLEASE DO NOT TELL ME YOU CAN BY THIS CAR FOR 15000 ETC ETC, I DONT CARE IF YOU WANT TO SPEND THAT MUCH THEN BUY THAT ONE! and also at present i am not separating anything, maybe early next year if there is no interest in the complete package. cheers Lee
  12. Victoria west suburbs. and cheers Femno for clearing that up i wasnt sure cause its not the first box ive had in the car
  13. cheers mate it did frequent the major SAU cruises in the day, have been a little slack lately but cheers again
  14. would be nice to see some more of these cars on cruises........ mine included
  15. will you post to melbourne?
  16. to be honest i have no idea, would have to assume it was an 89 though?? ive attached a pic if ppl wondering push or pull. im not sure so if yours looks like this then it will work. sorry
  17. as title: 1-R32 GTR gearbox with transfer case traveled probably 130,000kms gears seemed good but could probably do with new syncros, crunched a little at high revs 3rd to 4th. $500 ono also 1 cat back exhaust not sure on brand or size at the moment did run on the car making 430kw wasn't drowny or that loud either $200 ono parts located in Vic west suburbs P.S Att mods: i did post this yesterday but seems that it disappeared if mods find it please delete this one cheers.
  18. GTR 94

    Hiring A R35?

    haha yeah maybe . dont think any one would be that trusting though, cheers any way mate
  19. GTR 94

    Hiring A R35?

    any body have any info on where i may be able to hire an R35 from? Vic preferably, just for the day it is more just an idea as i want my old man to have a drive as a B-day present. any info much appreciated cheers guys
  20. GTR 94

    Hiring A R35?

    so far i found a place in Sydney $1000 a day, but want a $10,000 bond via credit card. does this sound reasonable? i could probably justify $500 and a $5000 bond. i guess its cheaper than buying one thanks for the info anyways guys appreciate it
  21. GTR 94

    Hiring A R35?

    i guess no info
  22. GTR 94

    Hiring A R35?

    hey guys just wondering if anyone knows where i could possibly hire out a R35 for the day, want to give it to my dad as a Bday present just for him to cruise around in. any ideas and prices?? cheers
×
×
  • Create New...