icydude

Hello, I am looking for the bell housing and flex plate from an automatic RB engine. Please pm me or post here if you have either. Thanks

5.0 mustangs are the farthest thing from sleepers in north america. you can run 8's for 15000 easily

I deffinitely typed it right

it works perfectly for me

I saw this on another skyline site, summarized it's a streaming skyline video site www.gtrvision.com some cool videos on there

If you want to do it right you will buy carrillo's unlimited rods with carr bolts.

You confirmed my suspicious Thank you

Which way does the oil flow around the filter. I know the pressure feeds to the filter, but does it come from the oil pump into the filter through the middle hole or does it come from the pump through the side hole then through the filter and down the center?

thanks for the suggestions guys, i will give them a shot this weekend

no, n1 pistons are cast, and cast pistons suck

I am hoping some smart fellow can help me out as the only transfer case i have is still packed away tightly in a container. I need to see a picture of the drive off the back of the transmission where it enters the transfer case.

As of right now i am having a headlight issue. The car is a r32 gtst. The intake side headlight wont turn on, high beam or low beam but the dim bulb still comes on, fog lights still come on as well when i hit the switch. I am wondering if anyone has any suggestions as to where i should look first for my problem. I have checked the fuses twice, i tried a new bulb as well. Wires on the plug are tight and still look good. A number of months back it would sometimes not turn on when i started the car but giving the light a swift hit with my hand would sometimes turn it on. Lights are non projector.

Hi there, I need to know if the 4wd blocks (rb26/25/20 with attesa) use the same bolt pattern as the 2wd transmissions/block. more specifically, will a rb20 automatic gtst transmission bolt to the back of the rb26? Thanks for your help.

Still looking for a bellhousing and a flex plate

bump

Anyone who has swapped a 5 speed into their stagea, i want to buy your old auto bell housing from an rb with atessa. Just as long as it's not cracked

Unfortunately I am in Canada, so pick up is out of the question. I would pay anyone for the post costs.

Hi there, I need the bell housing off of a gts4 auto transmission. Don't need anything else so it should keep weight down and such for shipping being aluminum. anyways, as long as it's good, no cracks i'll take it

Congrats

sure wouldnt want a battery in the back when you hit the brakes hard

I would like to see some pics

to fit the rb perfectly

I had to do a minimum order at the place i picked up my stainless socket cap water pump bolts/washers. So now i have four extra sets. Each set includes 11 bolts and 11 washers all stainless so no rusting Anyways 40 shipped I accept paypal and direct deposit, or anything else easy enough for me to set up

wonderful, thank you

Do Supertech oversize valves for the rb26 use factory collets. Reason being i already have jun titanium retainers that i would like to use.