icydude

I need two coilovers new or used that will fit and replace my dead JIC's that i have in the front. Im looking for something very firm as the rear is also very hard.

z32 tie rods are compatable for the most part with r32 GTR's.

I have 17x8 on the front and 17x 9 on my GTR. They both have 235 40 r17 tires. The offset is 38 and they have 3 mm spaces all around. The car came with wheels in that set up. Quite odd.

It turned out to be the AFM's ......no in search of two that are working. let me know if you have any

I would like to buy two GTR AFM's and I need them as quickly as i can get them. Let me know if you have any, I will be checking here hourly.

I will pay 200 for the AFM's if they are in perfect working order. email me at [email protected]

do you have one or both? Would you ship to Canada if i paid.

there was a fair bit of blow by in the piping buthe mafs did not have any on them now.

What is the CAS and how do i check it? The apexi ECU is reading the MAF voltages and they look good. Edit: Brain fart i guess. Check the connections for both and both are fine.

ok i'll check for leaks, I took apart the AFM side and cleanedthat stuff up. So far no help. I'll look on the other side of the I/C now.

Im hoping someone here will be able to help me out. I was taking a jaunt down a highway pushing it hard in 4th and when i let off the gas the car beganto slow down more than it should normally. I pushed the gas pedal and it just sputtured and slowly reved down. I pulled over on the side of the road and it then stalled. I repeatedly tried to start it but it would not hold an idle from that point on. If i floored it it would stall, if i touched the throttle a few times lightly it would rev up but missed alot. I played around with the apexi power fc settings a bit to get it home but it barely made it and sputtered all the way back 7 km. I got home and cleaned the MAF's out with cleaner and then putthem back in, I took a quick drive around the block and it would rev up and boost fine. I parked it for an hour then went to go back to the plans i had before it did all of this. I made it down the road about 3 km and it began doing it again. I took it back and cleaned the mafs out once more. It didnt help this time. Now i have the car in my garage. I have checked the spark plugs and they are fine, coil packs look good on visual inspection. Anybody know what it could be? I have been able to get it to rev and drive but it does not like hitting boost or beign under load.

no one? new or used.

Anyone? I need one in a hurry too.

still looking

Hello everyone, I am in search of a apexi power fc commander. modle number 415-x001 to be used with a GTR33L ecu. thanks alot.

I'll take it for 280 if you ship it to canada at my cost. Edit: I'll pay you 300 haha......same as 280 in canada.

My controller has FCCNT9805 - 0134 It does not work with my r33 GTR ecu

Im most likely getting them from jp unless i find a betetr alternative in aus.

Hello, I need the following: Set of Crank bearings Set of rod Bearings rear engine seal front crankshaft seal They are for a 1990/3 GTR if it makes any difference. Can anyone tell me what kind of price i would be looking at for these?

im interested in the clutch. how long was it used for and do you have any pics? will it work on a march 1990 GTR?

Im interested in the clutch....how long was it used. any pics of it? will it work on my march 1990 GTR?

im interested. willthis work on a 1990 GTR?