silver gts-t

some pics engine is currently in car

Selling my RB30 + Turbo set up This was built by myself and dad (mechanic), block work done by Westend performance and tuning by Tom and BD4s Engine has ran flawlessly for the past 4000km and a lot of good parts have gone into it.. Car ran in on 230rwkw and ran for about 1000km with 270rwkw with the small 8cm rear housing turbo This will fall into an gtst with no issue. Off the top of my head parts & work done: Rb25de head (rare r32 head, no VCT) Reco rb30 block (bore, hone, acid dip etc etc) Reco rb30 crank (crack test, linish etc etc) Cp pistons 9:1 Restrictors in block Reco head Gtr valve springs Cpc custom plenum with billet throttle body (will come with acc cable to work in gtst also master cylinder to provide room) Gates powergrip timing belt New waterpump Recondition oil pump Crank shaft collar Tomei cam gears All new gaskets Tomei head gasket New tensioners New king bearings, all replaced Powder coated cam shaft covers with welded -10 bungs Reco power steering pump Hks fconV pro with map and air temp sensor Gtr injectors Price 5.5k I'm sure there parts i've forgotten to list also TD06 20g with 8cm read housing Had this set up previously on my rb20 and made 260rwkw anyone with it will tell you its one of the best rb20 set ups you can buy. comes with: recondition Td06 20g turbo 8cm rear housing new front comp wheel Front dump pipe Oil line Custom exhaust manifold braided drain pipe Tial 38mm Wastegate Price $1.7k If you want the turbo set up + motor i can provide a good price extra parts i can sell to make the install easier are: Custom power steering reservoir with lines and earls fittings Custom radiator over flow bottle Apexi pod filter UAS catch can with light weight braided hose rb20 gear box in good condition Everything is in sydney and i prefer pick up.. Make an offer if you like but nothing stupid. Thanks John

Bump

For under 5k I don't mind if the body and paint need some work, if there is engine issues or even no engine. pm me or email wogridez at hotmail dot com Thanks John

I put it down to the builder, lol

hahahaha

lol

PM sent

alot of interest in the HKS bov would be a better purchase to buy the pipe aswel so u get the adapter i will throw in the silicon for the TB and 2 T clamps i'll let the bov and cross over pipe go to anyone that offers over $200

not 100% sure on the km but there doesnt seem to be any damage in the bores etc. the head was in real good condition. bottom end come with crank, pistons, pumps etc. if there's anything in particular you would like it to come with let me know. the engine was purchased from just jap and number havnt been used.

sydney mate, near hurstville

Need some garage space back, open to offers Parts are in sydney pick up on all items ok and can post smaller items at buyers expense All left overs from an engine conversion Engine: Rb20 bare block $20 RB25 complete bottom end $250 RB25 intake manifold gasket $50 Cam gears $40 Rb20 loom, make an offer Rb20 Ignitor $30 Rb20 Power steering pump $30 Rb20 Starter motor $40 Rb20 Clutch master cylinder $30 (was used or about 50km) Rb20 Standard exhaust manifold $20 Custom cross over pipe with HKS SSQV bov $250! (can separate) http://i362.photobucket.com/albums/oo70/Silver3l/sau_279.jpg Exterior: RB20 Original front bar $50 slight damage/ paint cracking (with fog lights!) Interior: Rb20 White face dials $50 ( http://www.skylinesaustralia.com/forums/wh...ez-t142257.html ) Rb20 Cluster bezels, brushed alloy with rings $50 ( http://www.skylinesaustralia.com/forums/wh...ez-t142257.html ) Will list more parts later Pm for other engine bits and ill see what i have (mainly rb20 parts) Pics on request Thanks John

Nice pics, gets me more pumped to get there. Im going for 5 weeks in july, Amsterdam, Paris, Switzerland, Monaco, Barcelona, Ibiza, Prague, Greek Islands, Cyprus. With the cost o f it all i havnt put a new camera in the budget.

shore thing

that's the same belt i have.. it fits, majorly tight to put on but it fits i noticed the same thing with the teeth but so far the car has seen consistant revs to about 5500rpm while getting a running tune and it hasn't moved. to get it on we needed 1 person holding the tensioner and belt and pushing in, the other person has a ratchet ready to screw it in good luck

this is probably correct

yep these ones http://justjap.com/store/product.php?produ...=259&page=1

they probably would not

Brand new top and bottom radiator hoses for r32 gtst only ever trial fitted, located in sydney $50 + postage or free pick up Thanks John

eye lids, side skirts, mirros, rear pods probably

im almost done.. gotta tidy n clean some parts up pic taken only on an iphone so crap

i got a gtst, standard bonnet, no cam gear cover = bonnet closed

After a Greddy temp gauge with sensors 60mm white face needed dont mind if its new or used just want it to work PM me asap to talk price thanks John

nice! very nice