Risking

A few hours was taken to put a basic CDS cage into a DC2 type R for Tony the marketing manager at wakefield park. Nice tight fit with basic intrusion bars to make it easy for him to use. Has been a couple of weeks since we did a full cage ( put a few off due to alloy fab orders needing to be cleared out) We also dragged prestige motorsports Time attack S15 out of the corner today. Ill put up a few photos of that latter. It turned into a full house build with carbon suspension and loads of fabrication work. Couple of cars to clear out next week (AWD R31, STI Andra cage and a 120Y E85 conversion) as well as the S15.

I seen your powerade bottle yesterday.....

This is one of the R34 combination catch cans. Its a radiator overflow and catch can built into one unit. Catch can is baffled and at the customers request has a 3rd fitting to vent back into the intake as opposed to atmosphere. Also have one R32 GTR/GTsT infront of battery location catch can left that has 2x -12an fittings welded onto it. Its $180 inc postage if anyone is after one cheap. Its been sitting around the customer fell off the face of the earth so might as well sell it.

Sump has left already mike, it went this week so I'd expect it to arrive today or Tuesday. I put the fittings in a separate bag so they didn't get damaged. Just be sure to clean the inside Before it fitted. They get washed here but Another wash won't hurt it.

Finished off one of the R34 combined overflow/catch can units. I've managed to utilize the original battery clamp location and weld on a machined pin that locates the tank. A simple bracket and bolt secures it into an original hole, no drilling required. I'll post up photos of it tomorrow when I get time.

No problem Allan I'll get something together for you tomorrow at some stage and PM it to you.

Guillotine....... If you don't have one just find a sheet metal shop and pay them to cut it for you. By the time you stuff around with jigsaws/bandsaws and blades then actually cutting it an inch/30sec you could have just paid someone $5 per cut to do it. Nibblers are good for curves and circles but take a steady hand to get good results

Where are you located??

The R33 surge tanks suit GTsT and GTR. They won't fit properly into a 4 door r33 though. They don't hang any lower than the chassis rails. Some of the larger "race" versions are about 10mm lower than the chassis rails which is how they gain some capacity. Never had one hit the circuit or ripple strips etc.

Don't even need to watch the video. Going off the comments made it's jeff denmeade instructing. As bigger knob as he is his got a few hill climb runs on the board, even if there was only a couple of cars in the categories he wins in........

I've got a heap of orders to fill when I go back to work in the next few days so the surge tanks for the R33 will have to wait till those pre paid orders are fabricated.

I've got a heap of orders to fill when I go back to work in the next few days so the surge tanks for the R33 will have to wait till those pre paid orders are fabricated.

Andrews old shitter is still sitting around. I could use that I guess.

Both cars recovered

There is a few options for the under car surge tanks. 1x pump 2x pump 1x weldon pump (far better than running 3x 044's, better than 2x 044's as well but more expensive) All types are offered with -6 or -8an inlet/outlet fittings or 5/16ths welded on barb fittings ( the most common way to do it) Also if you want one you'll also need to determine how much of the fittings you want me to supply with it. The weld on tank fittings are included -12AN couplings, pump inlet and outlet fittings are extra. Ive done a few R33's but never made a jig to reproduce the mounting tabs. So ill need to borrow an R33 for a couple of days to mount a tank and jig it up for latter reproductions.

Rally school had two wrx's stolen from moorebank/ chippingnorton on Xmas eve/ early Xmas morning. One vehicle (blue and white LHD) has been recovered in Campbeltown after being driven down Campbeltown road earlier today. The other vehicle a blue and yellow GC8 WRX is still missing. It has/ may still have rally school livery. From past experience with stolen race cars chances are the stickers have probably now been removed. Mick would love to recover both vehicles and is prepared to reward for their speedy recovery. Any info can be passed on by myself or directly to rally school at rallyschool.com.au.

Hey ryan. I don't think I've taken photos of the undercar surges. I have one that is R33 specific, r32 ones don't fit. Door trims are not a problem either but I only make those to suit the vehicle installation included in the price. The doors require some modifications to fit them neatly on the R33 which I rather do myself.

This is the rest of the R34. Unfortunatly I cant take credit for the rest of the work, it was completed by another place previously. Back to where it all began..... Doing a cage for one of the managers at wakefield park in his Type R honda integra. Doing a whole IPRA build for him actually but the cage is the beginning.

The capacity of those is 3.2L before they leak out the breathers. 3.6L in total but won't hold that. That exact one the photo above is $330 Inc gst. That doesn't include the hose or hose ends only the tank and welded on fittings.

I'm everywhere I'm located in Campbeltown. If you want a custom breather tank in a confined space I can do it, that's what I do. Have a look in the fab section and or the business traders section and there is heaps of photos of my work floating around. Cages, alloy work, anything and everything related to race prep is my bussiness. Undercar surge tanks are pretty popular now. Saves the hassle of sealing the boot area, smell, leaks etc.

Talking about a "race car" or just a car that's tracked?

I've had a few people getting asked about catch cans and fuel systems recently, while cars are being scruitneered.

Your car has a GTiR next to it still. I was considering moving your car to upstairs (floor is now rated to 5tonne)

I've done a few for r33's that mount near the fuse/relay box behind the drivers headlight

Fark you weren't kidding when you said my revo account was getting smashed!