[200]

I am really keen to sell this... Someone please buy it

Best PM offer has been $45 delivered with the screws. Every dollar counts. Thanks

price?

Thanks. So with an R32 head with r34 cams I would use a 34 CAS?

Hi, Just a quick question. Are the RB26 camshafts interchangeable between the R32-R33 and R34 models?

Set 2 Sold.

Yep, sure have. Everything is numbered so it'll go back in the right spot.

if you're interested its up for sale. i cbf getting the work done to it, i'll only be throwing away money. rb25 head for sale

Hi, I have this R33 RB25 cylinder head thats been sitting around for a little while. I was going to use it for an rb30 twin cam conversion but I have lost interest. The head is not assembled, but all parts were removed as per the workshop manual. Each part have been placed in a resealable plastic bag and labelled. I intended on having the head crack tested, resurfaced and having the valve train cleaned but I just cannot be f**ked with it anymore. I am located on the Gold Coast but I am happy to organise for freight to the major cities (I only use Northline). I can have it delivered to your doorstep if you are from a business otherwise it'll just be depot to depot. Local pick up is welcome. There are a couple of small parts missing here and there but nothing that you can buy from else where or brand new from Nissan. The cylinder head is sold as is. - there should be a baffle on the inside of this cover, I do have it but it has been drilled out - you can buy another cover from these forums or use a tap to have it screwed back in. - valve train in plastic bags, I didn't bother leaving the lifters in oil because I wanted to have them cleaned properly before being reinstalled. - random milk crate full of shit such as the inlet manifold, throttle body, a few coil packs and a few other little bits. The injectors are still attached to the fuel rail. - a different view... I do have the cam shafts, for some reason the pic didn't come out. I also have a spare throttle body as one of the throttle linkages was bent. The crank angle sensor is also included. I am not looking to separate any of the parts. Price is $300 firm. As I said, I am happy to send interstate if the buyer covers freight costs. PM if interested. Thanks

thats why.

Actually, nevermind.

$350 I am on the Gold Coast. I think it would be best to have the work done so you'll be getting a head thats in perfect condition with no cracks or warps. It is in pieces too and will need to be put back together.

Hi, Not too sure if you would be interested but I have a R33 GTS cylinder head. I am going to have it crack tested, get all the valve train cleaned properly and have it resurfaced. I would be asking $500 for it with that work done.

Some of the supra guys had problems with the Carrillo rods but this was quite a while ago, they did bend a couple under high boost. Carrillo changed something on their 2J rods which seems to have resolved the issue. You'll see that they have put HD in their product line for the 2Z series rods.

Out of interest, what do the Nitto rods run out at price wise?

Good mothers day gift!

I am after a complete set of RB25/RB26 Cam caps with studs. If you have a set please let me know the price. Thanks

Bump

You might need to buy an rb26 back plate so the timing cover will bolt up correctly and line up with the right holes because the rb25 one don't match.

bump

This might help. http://www.skylinesaustralia.com/forums/Fi...st-t302578.html

Price drop, $500 ono

He was clearly doing something right to be put in the position to buy these cars in the first place. I highly doubt that buying these cars would have had anything to do with whatever he does to make money. Pure ignorance.

Far out I love those old Monaros

I have a friend selling a complete engine for $1800 if you're interested.