Hi guys, where have you guys purchased your Nismo AFMs from? I have seen them on rhdrive and nengun but curious is anyone local can match those prices that someone might be able to think of, looking for new units too.
For sale:
2 x Z32 AFMs 80mm
Orange label
With plugs
$400 delivered for both
$200 + shipping individually
Can be veiwed before purchase if you want, they are used but in good condition, I no longer need for my build.
SMS 0419027124 or post here.
Thanks
David
nice, told a girl friend once if she brought a GTR I would marry her, so she brought one of these, I decided to leave her when she tried painting it too and messed it all up.
What is this wire on my alarm used for? I skimmed the manual front to back but the Mongoose M60 manual is a little vauge on details.
4) GND ARM (-) GROUND WHEN ARMED OUTPUT
I have installed a couple of alarms before and never heard of this channel name, and couldnt pull up much with a google or SAU search.
open the tank, have a look at the assembly in there, the stock one will fit in the bracket without any modifcation, if its a GTR pump it will have had the bottom cut off or bent to fit in
Search for Z32 wiring diagram there are a ton of tutorials out there
http://www.skylinesaustralia.com/forums/co...-s2-t69957.html
http://www.skylinesaustralia.com/forums/R3...Z32-t69487.html
That porting of the stock manifolds looks great, wonder why the facotry didn't do it in the first place, these were $160,000 cars... might play around next week while the engine is being assembled
What if the intention is to allow excess oil build up to drain faster, rather than simply drain all oil to the sump? That way you ensure you have lubrication when not under heavy loads, yet when going flat out the head can return enough oil to the sump?
Can you grab a photo or two of where on the sump you have the return line also please?
The rear left seamed the place to do it reading all this, but the wall isn't very high there, would on top of the recesses be the best place?
A photo of tweakit.net's return kit.
How important is the shielding on the two wires on my AFM plug??? The loom was a bit damaged so I cut that section off, should I wrap some loose wires around the outside , connect to the existing earthed shield then heat-shrink it all together???
I had same problem the other day on my R32 GTR, two large rectangular connecters near the washer bottom supply battery to the ECU, weird it goes that way round. Check them.
Did anyone record tonight? What word for word did that tool say about how lots Torque means the Cayene go faster when its above 80kph?
May have gotten wrong, but isn't the abilty to pull off a line down to the Torque of a car, the Power is more readily associated with the overcoming of drag over time?