Jump to content
SAU Community

Adriano

Members
 View Profile  See their activity

  • Posts

    3,894

  • Joined

  • Last visited

  • Days Won

    1

  • Feedback

    100%

 Content Type 

Everything posted by Adriano

  1. Adriano
    I splice the loom, and hide the original plug taped up behind the airbox, allows for converting back to the stock afm
  2. Adriano
    Remember that a missfire will show up as lean on the AFR meter
  3. Adriano
    Getting it surfaced does not effect squish.. The comp will go up about .05-.1
  4. Adriano
    Put it on ebay, the stocker works better
  5. Adriano
    I would just turbo the N/A motor, the amount you save by not swapping the stuff over will get you more power than the bottom end swap
  6. Adriano
    Factory piping is painted steel
  7. Adriano
    There are a set of murano 18's on ebay htat look pretty cool, $450 for 5
  8. Adriano
    Sand the rust off then paint, easy
  9. Adriano
    Agreed
  10. Adriano
    The r34 cooler doesnt bolt straight onto a 32. By the time you fab it up you might as well fit a front mount
  11. Adriano
    I would call them and ask
  12. Adriano
    I would have a look at the dizzy capa nd leads , maybe #4 is missing. I would have thought #4 cylinder would run lean with that plenum, with the pressure banking up at the back.
  13. Adriano
    Just drift it, the damage is already done
  14. Adriano
    Not quite, about 400-420rwkw, capacity and compression limits. Pretty sure brakes are 380mm, same as r35
  15. Adriano
    But you should be able to see light, the throttle plate should not contact the bore
  16. Adriano
    10 kilos, cummon
  17. Adriano
    Check ecu trouble codes, it will tell you if its an afm.
  18. Adriano
    Intercooler pipe blown off, did it start running like poo after you gave it a bit?
  19. Adriano
    As trent said, it takes abot 1 minute to do, unless you have the inductive pickup option, then it takes 10 seconds
  20. Adriano
    No, it will be fine
  21. Adriano
    Why dont you check the diagnostic trouble codes
  22. Adriano
    Are they both mitsubishi cas's, or is the rb25 a series 2 uisng a hitachi one? If so i think you have to swap two wires.
  23. Adriano
    Might need a 1.06 housing though
  24. Adriano
    I would spend $800 ona good water meth setup and try for 420rwkw. If that isnt enough, then nothing will be
  25. Adriano
    Just had an rb30 r33 passed roadworthy (blue slip) in qld
×
×
  • Create New...