shanef

For sale is my 1989 r32 gtr. As per my parts sale thread http://www.skylinesaustralia.com/forums/Fi...99#entry4751199 i'm selling up and moving on. I bought the car in mid 2006 from a forum user in Newcastle. It was stock std when i drove it home to qld. Two weeks later it spun a big end and i then started to create my interpretation of a monster street/drag gtr. The car has had the engine bay completely stripped back and repainted in a custom purple pearl mix. Every nut/bolt was replaced with stainless. The interior has been completely stripped, all the sound deadening material removed and the floor cleaned spotless. The boot and rear firewall have been modified as per the pics below. I had the boot setup to take a 20gal RCI fuel cell, 3gal peterson dry sump tank, a nitrous system and a custom fuel system. The rear firewall was completely removed and a new stronger section put in. With the new firewall, i had it made rearward of the shockie towers to allow the rollcage much easier placement. With the boot modifications, the rear boot hinge components have been removed, so pins/locks will need to be installed to mount the boot. This new work has a coat of yellow (not my choice of colour ) killrust sprayed over the top so it doesnt rust. All this work has been done in accordance with an engineer so the car can still be street registered. All of the glass/windows were removed in anticipation of getting a roll cage fitted. I still have all the framework and glass etc to go with the car. The car has also had the battery relocated to the boot. It's also got a lockbar installed and the complete hicas system has been removed. The std fuel lines were removed and theres currently a single -8 alloy fuel line under the car, i've got a roll of the tubing here that can go with the car also to run the other line. It's also go a new set of nismo braided brake lines front and rear. I had the wheels refurbed (lips machined and 2 repainted) at Wheel Revolution in slacks creek around 2yrs ago aswell. The body on the car is pristine minus the odd little scratch on the front quarter panels & a bit of white paint? on the passenger front guard above the wheel arch (stinking workshops). There are a few spots on the floorpan that have some rust but can be easily cutout and replaced. It comes complete with all the drivetrain, gearbox, all shafts etc. Full interior minus front seats and aircon. Parts missing to finish it/get it running are listed below. The car is complete minus the following: - Complete engine (i have a sump but has had the base cutout) - Radiator - Intercooler - Front bar - Bonnet - Front seats - Air conditioning/heater (dash harness has also had the aircon wires removed) - Abs (new front lines have been made but will need to be remade in stainless) - Fuel system - Clutch line - plus any other little things i've forgotten Price i'm chasing is around $7000 as it is and the buyer takes all the spares separately, or $8000 with the interior but back in and all the glass reinstalled. I can also turn the car into a running example with engine and fuel system etc if required also, PM me if you have an option you'd like to discuss. The car is located in Ipswich, Qld.

yeh centre cover. pm an offer have a look at the sticker, you might be able to decipher it better than me. but my guess is it expired in feb 2000, not sure on the size but i weigh 78kg and i'm tall and skinny and it hugs me pretty well yep its sold here some pics of the chute & release cable kit

still got the covers but i've sold the spark plug cover so i'd take 350 for the rest of them

It could well be the head, upwards of 500hp is near capacity for the gt35 so everything would have to be working pretty damn near perfect in conjunction with each other to get everything out of the gt35. Actually, after comparng ur graph to a mates latest tune graph, i would almost put money on it being the head. Both power lines are near identical until ~106kph where his power picks up extremely fast. His graph is below, his is a built 25 but his head has solid lifters, 1mm exhaust valves, extensive porting and chamber work but only 260/9.15 cams. It's on a pretty safe tune aswell and theres plenty left in it.

head & fuel cell are sold

wastegate & bov are sold.

yepo

I thought as much its still for sale so if u want it drop me a pm nope none left, brad's actually bought all my dry sump stuff lol clutch line was picked up tonite.

Awesome brad, good to see they are going into a serious cars! Sent them today, you'll see them monday sometime. Its all in 1 box.

Aeromotive pump, both aeromotive filters, peterson tank, ross balancer, crankshaft sprocket spacers & idler washers, throttle body & front diffuser are sold waiting for payment/pickup on headstuds, clutch line and oil cap

hang on a minute, ur going to bore the block before you get the pistons?

haha it'll get to run a 9 finally

apparantly so! yep still available. i even have the box and plastic wrapping for it aswell!

aftermarket. it's fibreglass. it includes all the mounting brackets and bolts aswell

thanks chris. theres atleast 20k left to spend to get it to running condition. thats not cutting corners and without a decent gearbox. i thought about cutting corners and slapping it together, but i dont do cutting corners (as you've probably noticed)

Aeromotive pump, both aeromotive filters, peterson tank, ross balancer, crankshaft sprocket spacers & idler washers and throttle boddy are sold pending payment. PM sent terry... cluster as in speedo by itself or with the surround aswell? i have both

Item: Garrett GT4202 0.91 A/R TV flange Condition: Brand new Price: $2250 Item: NOS Universal Wet kit - 05131NOS Condition: Brand new Price: $750 Item: Peterson 3gal dry sump tank Condition: Brand new Price: $550 Item: Simpson Parachute Condition: Brand new Price: $350 Item: Deist Parachute release cable kit Condition: Brand new Price: $60 Item: Cobra Carbon Fibre fixed back bucket seat with universal rail Condition: Used Price: $750 Item: Braided Clutch Line to suit r32gtr (could suit other cars, buyer will need to check) Condition: Brand new Price: $80 Item: "263ORB" Personalised plates. Condition: Brand new Price: $900 Comments: SLimline front and rear. Gold lettering on dark blue background. Item: Complete set of Upper & Lower Timing Cover bolts & washers Condition: Brand new Price: $150 Item: Crankshaft sprocket spacers & idler washers (flat & wave) Condition: Brand new Price: $75 Item: R32 Gtr Front diffuser Condition: Brand new Price: $350

I've made my mind up and i'm selling my 32 gtr & all of the parts i've collected over the years that i was going to use to build it. It's a hard decision but its taken soo long and i no longer have the patients or the drive to finish the project. I'll put up another thread for the car itself. All parts are located in Ipswich, Qld. Contact via PM or call/txt me on 0403572904. Item: RB26 head Condition: Used Price: $800 Comments: Head is bare, has bronze guides installed and cam caps but thats it. The guy i bought it off said it was ported by RAMS in sydney. Intake/exhaust ports have been modified, combustion chambers are stock. Head looks to have been clearanced for big cams aswell. Item: RB26 rocker covers, coil pack cover, upper & lower timing belt covers Condition: Like new Price: $450 Comments: Covers have all been painted in Ford Blueprint Blue. Item: JUN Oilcap Condition: Brand new Price: $75 Item: RB26 R32 4wd sump Condition: Used Price: $150 Comments: Sump has had the wings and base cutout, suit someone wanting to go dry sump or an enlarged sump. Item: RB30 block & custom 4wd Billet Girdle. Condition: New & used Price: $1900 Comments: Block is std bore, it's been modified to suit the billet girdle (no oil pickup, de-burred and has been clearanced around the sides to bolt a 4wd sump) Item: Argo RB30 21mm conrods Condition: Brand new Price: $1100 Item: ARP RB26 headstuds Condition: Brand new Price: $350 Item: ROSS RB25 Harmonic Balancer Condition: Brand new Price: $450 Item: Aeromotive A1000 fuel pump Condition: Brand new Price: $375 Item: Aeromotive 100micron -10 fuel filter Condition: Brand new Price: $80 Item: Aeromotive 10micron -10 fuel filter Condition: Brand new Price: $80 Item: Aeromotive Pro Series fuel regulator Condition: Brand new Price: $395 Item: Carter GP4600HP fuel pump Condition: Brand new Price: $125 Item: RCI 20gal foam filled fuel cell with level sender Condition: Brand new Price: $375 Comments: Has an RCI filler neck installed aswell Item: Custom 2l surge tank Condition: Brand new Price: $175 Item: Turbosmart PowerGate 50mm wastegate Condition: Brand new Price: $750 Item: Turbosmart RacePort 50mm bov Condition: Brand new Price: $350 Item: BMI 90mm throttle body Condition: Brand new Price: $350 Item: 6boost Rb26 manifold - to suit TV flanged turbo's, 50mm wastegate pipe, made for a 26/30 in a 32 gtr so it sits the turbo forward of the shockie tower so theres room for a 5" dump Condition: Brand new Price: $1050

How good is ur tuner? That will be the key to how long this time bomb engine will survive. Good luck but dont be suprised how much of a dog its going to be, at how short a time the engine is going to last, and at how much trouble you are going to have along the way.

If your budget doesnt extend to atleast 50k then i would forget using such big turbo's. You should have an aim of some sort before you start.

I wouldnt even bother trying to source the adapters new, i tried that and instead raided the rb30 collection (different thread size each end). To get them off the block just go buy 2 half sized nuts and do the old double nut lock trick. Pic show what i did: Got the sandwich plate from mscn http://www.mscn.com.au/scripts/prodView.asp?idproduct=354 part number TD1014B

pritek, enzed etc P.S its 3/4 BSP

have you actually asked?

yes they are, and especially if you go to enzed. best place if ur buying in bulk is from www.summitracing.com i've bought thousands from them with no dramas, and they have 24/7 phone tech/sales support too! locally though i've used both mscn.com.au and vpw.com.au with no problems, mscn have true overnight delivery and their prices are good

if ur close to rotarura try the guys @ rips