Jump to content
SAU Community

grim32

Members
 View Profile  See their activity

  • Posts

    283

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by grim32

  1. grim32
    assuming that no repairs need to be done prep with p800 wetndry for metallics, p600 for solids. you dont need to take all the paint off, just the shine. as for guns, get one with a 1.4mm needle and when painting i adjust the needle out 2.5 turns from closed and hold it about a fist width from the pannel. i could go on forever about this topic,but i wont. practise practise practise. pm me if ya need any questions answered.
  2. grim32
    the easiest way is to put a bleed valve on the actuator line. 1. search forum for boost controller,think someone posted em for $20 2.cut the vacume line in half from the turbo to the actuator 3.install valve 4.adjust valve till happy with boost. its as easy as that.
  3. grim32
    plugged my wolf 3d into a mates 32, it worked but didnt go the same as mine cause it was tuned to my mods, if you have different mods to your mate you will need to get it retuned
  4. grim32
    sounds like maybe the actuator arm needs more travel, can you disconect the actuator from the waste gate and then wire the wastegate fully open, mine wont even make 1psi if i do this so it should give you a good indication of what the problem is
  5. grim32
    how did i do that, sorry
  6. grim32
    thanks mate but then ill still have to make another one. think ill just build a box that will fit 2 and clear the parcel tray. thanks anyway
  7. grim32
    thanks but it looks like ill have to pull my finger out and make one
  8. grim32
    my excel had a bit under 1/4 tank and i put 355ml (a beer bottle) of acetone in. drove around stop start, left to right. temp stayed normal, no miss, no post ignition. everything stayed the same, it might have gone a little bit better mid range, but cant swear on that, anyway it done no damage at all and ill be interested to see if any of you guys get good results.
  9. grim32
    still got it? can you give dimentions of box and would you sell the box without the subs. thanks
  10. grim32
    we have some at work, ill dump a bit in my excel tomorrow and see what happens. did anyone see myth busters when they put the moth balls in the fuel, increased octane and rpm picked up
  11. grim32
    go for the dvd player and screen, i just put one in my car. only $400 off ebay and its great. looks like an alpine deck too
  12. grim32
    yep
  13. grim32
    hey mate i replaced my diff recently with a viscous, i no that cause it had it stamped on it. if u can get the car in the air and have a look
  14. grim32
    not as easy as it looks, it takes practise. thats why i done a 4 year apprenticeship. get an old bonnet, stand it upright,have a go and learn from your mistakes. when your happy with the way the bonnet looks, do the car.
  15. grim32
    plug for cas in properly, give it a wiggle and see what happens
  16. grim32
    not 100% sure but sounds like a air lock, i would try giving them a good bleed and make sure the master cylinder is full while doing so
  17. grim32
    hey shane there is a set of 6 gtr injectors on ebay going for $50 at the moment, i bid on them but just organised a set elsewhere. they still have a few days to go but might go cheap if you can wait. hope this helps.
  18. grim32
    thanks guys i have a set on the way :-)
  19. grim32
    hey guys im after a set of 440cc gtr injectors, if anyone can help me out id appreciate it. thanks russell 0404854442
  20. grim32
    do u have a set of injectors still?
  21. grim32
    yeah thanks mate just got a set of splitfire coils for it anyway, no they are new now
  22. grim32
    any plugs look really grey or white, could be bad connector on injector
  23. grim32
    hey guys just a quick one, are you still using standard rb20det ignitions, and what do you think is the limit of them rwkw before upgrade is necessary. just trying to sort out some problems with mine at the moment, thanks.
  24. grim32
    the air temp sensor for the r32 is inside the afm, so ive been told by the tuning shop i use
  25. grim32
    take it to a radiator shop and get them to pressure test it,even a mechanic could do this. i had a similar problem once,cracked block. make sure u drive it hard before u take it down so they see what it is doing. good luck
×
×
  • Create New...