32 4whore

Im pretty sure im gunna enter the LIMO just for shits and giggles this year. Unless a Drift event clashes with this years Autosalon. I just want to put it on the Dyno and see peoples reactions. HAHAHAHAHAHAH A big black limo thingy pushing 300rwkw's hahahaha

once I get the footage from Waza. I thought he would of put some of it up in the Wheelworx battle Report. but im not from wheelworx so prob best he didnt

well HELLO TRISTO. HAHAHAH hurry up and get back out on the track mate. Want to have some competition at my level. Oh and I will hopefully have footage of me up shortly. Just gotta wait to get it from the guy who was out at the private day the other week

In response to his comment I would of said no i am on my way home from work. You will need to bugger off ya blow off valve. Strut brace (prob wouldnt get told off for it but still its an A/M item so bugger that off. Boost COntroller. High Flowed turbo will be no issues if it's just the RB25 turbo highflowed. As there is nothing changed on the outside of the turbo. With the FMIC have you cut up your reo bar at all? if so that may fail you. And the hole on the side just get some vac hose slice it down the middle and put that around the hole you cut for your pipe. And I would take the induction pipe off aswell just incase. And anything else you have done to your car

hahahaha andrew you have no idea. By the end of the day i was pretty much linking the track with no issues at all. Well except the problem with getting 7 laps out of 2 brnad new tyres

As ryan said the actuator hasnt been seald off properly. So the exhaust wheel is leaking into the screamer pipe and causing lots of unwanted noise. The one an donly place to get a great sealed Screamer/Front/ Dump pipe is Andrew from AM Performance. He made me one up for the 32 and it was awsome. Could drive past cops and they had no idea what was lying beneath. Take the screamer off and get the maker of it to adjust it to stop the leaking gases.

+1. The only bad comment i have heard about Morpowa is from kids playing with there boost controllers/ Computer controllers and playing with settings and popping there engines. Simon and the boys at Morpowa have/ will do anything to help out any of there customers

Simon P is the only person that will be touching my JZX81. He is the nly person I trust and am Sponsored by him. He repmapped my R32 with no issues at all. You pay for what you get. My R32 made 190rwkw with a very very safe tune. another R32 that got done by another company made 20rwkw less with more mods then mine. GO FIGURE. GO with whoever you wish. But your drive over will be boring and your drive back will be very fun

if you dont have the correct supplies go to Extensive Wheel and Rim on south road. Don't do it yourself as you wont make them true again and you will have massive issues

Some recent pics from the All Japan Day in April. And also a few pics from todays private track day. Had a bloody ball in the car. Can't change a thing on it at all. But might need to get some chewy to hold the rear bar back together. Will have some footage of todays efforts up shortly. And will have some pics from Round 3 DA this weekend. Toodle pip boys and girls

sowwy bout the kink huddy. You will be all ready for DA. YAY.

No. The ones i have on them now are my sponsors tyres and im not meant to give them away. And they are fried anyway. I can put some 2nd hand ones on them.

feel like a passanger girlie???? Brenton

Item:17 x 8 +18F & 17 x 9 +24 Rear Weds Kranze Rims 5 x 114.3 F and 9 hole 114.3Rear Age:1 yr from when i got them from japan Condition:Great Price:$1500 ono $1600 delivered interstate To Fit:Skylines. Silvia's with 5 stud. Toyota's (What car) Location:Adelaide Contact:Brenton on 0439 455 399 or just PM me on here. Or come down to Adelaide Tyrepower on Currie St if local Comments: Have had these wheels since this time last year really. Fit perfectly on an R32 coupe and 4dr. They have some minor gutter rash on 2 of them and 1 is currently getting some nasty rash taken out of it professionally by Extensive Wheel and Rim as i am typing this. I dont want to let these go as I want them for skid rims on the 81 but i cant afford to keep them. I need to get new things for the 81. Am negotiable on the price but nothing too stupid. Any further questions just ask.

that thing doesnt drift. PFFFFFFFTTTTTT hehehehehe

swapped the 32 for it. plus some cash to the previous owner. will not disclose payment though. LOL. Great deal is all im saying

Hey Guys. I got rid of the 32 4dr and got a new toy. All you adelaide Boys/ Girls will be able to see this out at Mallala Rd 3 DA. And other Practice days/ comps. Below are the specs for the thing The car is a 1992 Toyota JZX81 MarkII "Yamaha Edition" (1 of 300) The motor and all accessories were built and assembled in house at HKS Kanto, Japan It has: 1JZGTE Motor (claimed 10,000kms since HKS build) HKS stainless exhaust manifold HKS 3037S turbo 480ps rated HKS 50mm External Waste gate HKS 264 degree Cams HKS 1.6mm head gasket Custom HKS Intake Pipe Custom HKS cooler kit HKS 3 core radiator HKS oil cooler kit with remote oil filter Custom HKS catch can HPI tourque dampener HKS 540cc injectors Tomei Fuel Pump 3 ½” straight through exhaust to a custom HKS Muffler screamer pipe from external wastegate Custom HKS front pipe HKS thermostat Autronic SM4 Stand-alone ECU (3bar map sensor) running a custom wiring loom, mounted in the stock ECU position (out of sight) with a glove-box mounted data cable. LS1 Coilpacks custom mounted with 8.5mm leads Wheels: BBS mesh 17 x 9 +20 all round R154 5 Speed Manual Gearbox OS-Giken Twin-Plate Clutch TRD 2-Way LSD Rear subframe modifications (extra weld bracing + mounted closer to chassis to maintain suspension geometry) Kei Office Coilovers (custom specs) "Tezuka Model" - Front-10kg Rear-8kg LARGUS sway bars front & rear (extremely thick) with pillow ball links Strengthening rear Tie Rod's R32 GTR Brakes (front: 4 spot alloy callipers) HKS braided brake lines HKS braided clutch lines Strengthenned front Stub Axle links Strengthenned front toe arms Modified steering knuckles (for stupid amounts of steering lock) New Wheel bearings all round All bushes replaced recently Free Dom Boot brace Free Dom Floor brace (monkey brace) Free Dom Rear Pillar brace Tanabe Sustec Front Strut brace Chassis Seam welding Dart Izumi “Destructive King” front bar Free Dom side-skirts Hippo Sleek rear bar Original "Yamaha Edition" rear lip/boot spoiler Front & rear wheel arches all custom hand flared ~20mm Free Dom single layer Carbon Fibre vented Bonnet Clear indicators w/ blue side lamps Dark tint rear passenger windows and rear windscreen. Nardi Steering Wheel Grex gear knob Blitz Boost Guage Greddy Gauges: Water Temp, Oil Temp, Oil Pressure, Exhaust Temp Blitz Electronic Boost Controller – Dual SBC-R Bride Brix Drivers Seat Bride “Super-low” drivers sliding seat rail some double din CD player About the car: The car is a special model of the JZX81 called the "MarkII Yamaha Special" one of only 300 produced from toyota. It was used as a daily driver/slider by an associate of none other than D1 driver Tsuyoshi Tezuka, who's shop Kids Heart tuned the suspension set up for drift. It has also had a small feature in a Japanese drift magazine. The Autronic has been setup with a very safe tune by a very experienced local Adelaide based tuner (before turbo rebuild/upgrade). Running BP Ultimate, the car makes 280rwkw on only 16psi (limiter set to 7500rpm) with excellent turbo response, making the 16psi @ ~3600rpm, and making 200rwkw by 4000rpm. This was on the old turbo, the rebuilt set up seems even more responsive again, making full boost at around 3000 rpm.

hey mate. don't spose you have any kits for a JZX81 at all

I have gone to the darkside boys and girls. No more R32 4dr as of 4pm tomoz arvo. AND ANDREW. IM DRIVING IT ALL THE TIME> NA HNAH NAH hehehehe

Can i call shot gun ????

Thats the best example of what a Stagea shoul dlook like. That is perfect. I could not touch a thing on it to change. Well maybe the rims but meh. 10 out of 10 for your efforts mate. Good work.

I poped a cooler pipe buddy. But i was told I hit the wall????? Car looks nice now mate. Just don't get defected ya girl. PFFFFFTTTT 1 hr sleep.

I did a massive burnout in this boat. While you were doing something. Yeh it looks allright. Now use the engine properly and open it up biatch.

Another update. I have lost the disk to get my fone to connect to my computer so i can't show alot of pics. But the 32 is now stripped and will get a full 7 point roll cage shortly. Ummmmm whats new. Got a few sponsors onboard. Sumitomo Tyres have jumped onboard and also Smooth Garage. below are a few pics from Round 1 G1 Drift comp and once I get my fone plugged into my comp i will upload some pics of the inside And my fav of the day. Thanks again Mike for the pics Looking forward to trying new things. Cheers, Brenton

Go see Simon and the boys at Morpowa. My car only goes there and a few other users on here only take their cars to Morpowa