EVLR30

i know most of you will sAfrican American and carry on ,but the nz speedtech evo just posted a new world record,fastest evo in the world and 2nd fastest 4cyl 4wd 8.3@177mph:0

awwww ok, yeh i was looking @ mine aswell,and im gonna cut ciruclar wholes for the piping in the front stone guard so i can keep it i'll post pics up once finished D:

jealousy is a sad thing.... and stagefumer err what do u mean by they dont come out with a front bar,havent you removed the lower stone guard ? err am i barking up the wrong tree

ive done the s13 hub and 4pot converison on myr30 skyline with slotted znoelli rotors. i just rang up when i ordered them and asked them to redrill them to 4x114.3 stud pattern ezpz oh and i used the gtst discs:)

yeh the one the liberty gearboxes

excuse if i seem rude but please quiet in the cheap seats and shut up. i was there and i saw the run in person so believe me when i say he didnt get into top gear and he did back off. and was far from a perfect run. to be perfectly honest i was dumfounded when i saw 7.92 on the board as i thought it didnt look as fast as sum of his previous 8 second runs.

yeh he run a 7.92@256 and backed off from what ive heard he didnt even get into top gear another lil whisper ive heard is that hes developing a 2.8 to slot into it so should be interesting heres the clip if youre interested http://media.putfile.com/Reece-McGregor-R3...-256kmh-14-mile

im running s13 tein's in my r30 the super street damper kit,and ive found them to be excellent . Not too harsh on the street and trust me the roads around my area pretty damn average,at the same time a very nice setup for the both the strip and the track im more then happy And theyre both height and damper adjustable.

err rb30's are single ohc ..

thats thing im curious about is compression ratios... what size headgasket should i run with the rb30e pistons to get a good compression ratio eg 8.5:1 or 9.0:1

hi im sure this has already been covered but what thickness head gasket should i run im running standard rb30 pistons 1mm o/s any suggestions... r32 head

umm why can you not get compliance with the coilovers in...

i run 25mm spacers on my hr30 and the studs were actually too long ,they protruded past the spacer causing the wheel to not sit on properly so shouldnt have a problem with only 6mm spacers.

is it only on initial start up in the morning ? doesnt feel spongey at any stage ? maybe even a broken seal in the master cylinder.. just look for signs of brake fluid around fittings on guard liners suspension arms anything like that or below or around the master cylinder hope this helps.

thanks for the help and advice oh and cheers for writing the guide to the 4pot conversion worked a treat.