nigelswazi

I should clarify as I have had a few pms regarding the colour difference. The spoiler is R33 Series 2 Metallic Silver The car it is fitted on in the pics is a R33 Series 1 which feature the lighter silver

I think it is made of fibreglass I would have to double check along with weight would be around 5kgs maybe less maybe more

Thanks for the replies and thanks again Lee (pm sent) for your offer of help. Due to my driveway I have organised a Ute with a hydraulic arm to collect and deliver but wont be a while we need to get to the end which is in the corner of the workshop atm blocked in. If someone on here is looking for RB25 Long Motor just pm me I may let it go if its needed better than sitting around collecting dust

Well I haven't used this bootlid/spoiler in a while now and maybe tempted to sell it for the right price. You are looking at an extremely rare R33 Bootlid Spoiler that bolts straight onto your existing bootlid using the stock 4 bolts. This spoiler lifts the bootlid to the height of the rear guards and tapers up at the back as shown in the picture. The bootlid is currently in R33 S2 Metallic silver but has cracks in the paint so would ideally want to be repainted which would need doing if your car is a different colour anyway. Pics are below click on the thumbnail image to see full size pic of it fitted to my car. Price - $350 Location - Adelaide but will package and post via courier at buyers expense Contact - PM or sms 0404998591

Well my spare RB25 long motor has been sitting in a friends dads workshop for quite sometime and the time has come to move it to my house, if I don't he will send it to SIMS and there is no way my perfectly good RB25DET is going there! So basically I am wondering what the best way of moving the engine is I live about 5-6kms from the workshop and the other problem is my 40 degree driveway down to my garage at the other end. Also does anyone know how much a RB25 long motor weighs? If anyone has used a company they could recommend or have the means to do this themselves please reply here, pm me or sms 0404998591 with details and approx cost not wanting to spend an arm and leg just to relocate the motor. Also if anyone is looking for a RB25 I am willing to sell it at this stage as my motor is still perfectly healthy and it could be picked up from the workshop direct in this case otherwise I will hold onto it. Thanks in advance for all replies

Thats what I was thinking at just over $2000AUD its very tempting but...

Sorry these are now SOLD

Are these the ones that were on eBay?

How is that so? The R33 Series 2 Turbo has a nylon compressor wheel and a 2IU rear housing The R34 Neo Turbo has a nylon compressor wheel and the bigger OP6 rear housing So then in theory the R33 Series 2 Turbo should spool up quicker but run out of puff much quicker than the R34 Neo turbo. This is why for those looking for the perfect balance between response and top end power the R34 Neo Turbo is the best upgrade for a RB20 when chasing good top end power (it doesn't run out of puff) whilst still retaining reasonable down low torque. The R33 Series 2 Turbo is the best upgrade for RB20 owners who still want the response of their stock turbos but a decent upgrade in mid/top end power. I have driven both combinations and prefer the R34 Neo turbo as its still very responsive but makes tyre shredding power and torque. I have to admit the R33 Series 2 turbo is still a awesome upgrade but just doesn't have that punch. All been said any other these turbos are a great budget upgrade for a RB20. Im not really a fan of the VG30 turbo as they are getting very old and hard to find one in good nick these days that hasn't been thrashed out. They are also a little laggy compared to the above options but still make decent top end power.

Pm sent

Shotgun the Recaro Seats PM sent

The only real difference is the Nylon front compressor wheel on the series 2 turbos but they are no more reliable than each other.

Well the front bar is a modified standard one so it fits like a glove. The sides and rear are PSI Parts / Sniper Racing body parts which after removing my stock rear bar, pods and side skirts appear to fit really well just a few small adjustments on two corners, filing the corner down a little so it could fits more inwards, and the rear bar fits nicely. So I suppose I really only need to get it painted but who should I use? Also with regards to fitting the fibreglass rear bar has anyone fitted one on here before? The stock one has special plates on both sides that have three bolts that protrude which are used to do the main fitment to the car. The fibreglass bar just has a flat fibreglass plate bit which I assume you are meant to drill but what do you use to attach it? Thanks for all the replies keep them coming. P.S. Is there a Tutorial or DIY section someone on here someone has found giving a guide to fitting body parts?

Hi Everyone, Okay so I went to take my skyline to my usual crash repairer to get my new bodykit painted and fitted but they, Provident Crash Repair, no longer like doing bodykits and if they do it they want $3000-4000 to paint and fit! The frustrating thing is the front bar is standard with lower lip so it wouldn't even take that long to do it would just be the sides and rear but they are high quality Ozzy made parts that fit snug. Where are currently the best places to get this done that are both good quality and reasonably cheap? I am open to people that can do it backyard but quality styles too. Thanks in advance for all replies

Selling a set of Brand New JJR Coilpacks to suit RB20, RB25 Series 1 and RB26 (R32/R33). These are brand new in box I was going to use them on my setup but I need the cash to paint my new bodykit. These are $399 + $25 for postage from Just Jap but they are currently sold out and unavailable with talk of a price increase when stock comes back in. Price - $350 will post at buyers expense Location - Adelaide Contact - PM or SMS me on 0404998591

Well after the other half throwing my Front Reo away when we had hard waste pickup a couple of weeks again I am in need of a replacement] Need a R33 Series 2 Front Reo must be uncut Please PM me or SMS 0404998591 Thanks guys

NOW SOLD THANKS FOR THE INTEREST GUYS

SORRY FORGOT TO PUT PICS IN THE LAST POST AND CANNOT EDIT IT SORRY DAIHATSU CHARADE DAILY FOR SALE - $$$ SPENT - AUTO, SWEET MOTOR, NEW SHOCKS + BUSHES, ELEC DIZZY ETC Well the Skylines almost back on the road now and I have two dailys so the time has come to sell one. For sale is my Daihatsu Charade G100 with the following features: 3 CYL 1.0LT Motor - In fantastic condition doesn't leak or blow any smoke at all and naturally runs off the smell of a oily rag Automatic Trans - easy to drive G200 Electronic Dizzy Installed - Gives perfectly smooth idle and better acceration and power New Rear Monroe Reflex Shocks - Cost a fortune Rear Aftermarket Stiff Springs New Urethane Steering Rack Bushes Rear muffler replaced as it was rattling General tidy up replaced most broken interior trims and late model steering wheel Full major service only recently completed - full coolant flush, new thermostat, new thermo fan switch, new spark plugs, carby cleaned, new silicon wiper blades etc, front rotors machined with new pads. G102 Rear Hatch Conversion - the one with the sort after CHARADE garnish at the bottom. Paint is good except the rear hatch which is a little faded. Good tyres Has A/C but the belt isn't connected to increase acceleration Currently doesn't have rego as it needs renewing but its as simple as renewing. Perfect daily for around town surprisingly zippy for the engine trans combo and drives well went from driving a 270rwkw daily to this for a while did the job. This motor is simple to convert to turbo for those looking for a turbo project daily. Price - $1000 FIRM Location - Adelaide Contact - PM or SMS 0404998591 PICS WHEN THE CAR HAD 16's WHICH WERE SOLD BUT GIVES YOU A GOOD IDEA WHAT IT WOULD LOOK LIKE WITH MAGS

DAIHATSU CHARADE DAILY FOR SALE - $$$ SPENT - AUTO, SWEET MOTOR, NEW SHOCKS + BUSHES, ELEC DIZZY ETC Well the Skylines almost back on the road now and I have two dailys so the time has come to sell one. For sale is my Daihatsu Charade G100 with the following features: 3 CYL 1.0LT Motor - In fantastic condition doesn't leak or blow any smoke at all and naturally runs off the smell of a oily rag Automatic Trans - easy to drive G200 Electronic Dizzy Installed - Gives perfectly smooth idle and better acceration and power New Rear Monroe Reflex Shocks - Cost a fortune Rear Aftermarket Stiff Springs New Urethane Steering Rack Bushes Rear muffler replaced as it was rattling General tidy up replaced most broken interior trims and late model steering wheel Full major service only recently completed - full coolant flush, new thermostat, new thermo fan switch, new spark plugs, carby cleaned, new silicon wiper blades etc, front rotors machined with new pads. G102 Rear Hatch Conversion - the one with the sort after CHARADE garnish at the bottom. Paint is good except the rear hatch which is a little faded. Good tyres Has A/C but the belt isn't connected to increase acceleration Currently doesn't have rego as it needs renewing but its as simple as renewing. Perfect daily for around town surprisingly zippy for the engine trans combo and drives well went from driving a 270rwkw daily to this for a while did the job. This motor is simple to convert to turbo for those looking for a turbo project daily. Price - $1000 FIRM Location - Adelaide Contact - PM or SMS 0404998591

Selling a set of Brand New JJR Coilpacks to suit RB20, RB25 Series 1 and RB26 (R32/R33). These are brand new in box I was going to use them on my setup but I need the cash to paint my new bodykit. These are $399 + $25 for postage from Just Jap but they are currently sold out and unavailable with talk of a price increase when stock comes back in. Price - $395 Delivered Now $350 Pickup will post at buyers expense Location - Adelaide Contact - PM or SMS me on 0404998591

Selling a set of Brand New JJR Coilpacks to suit RB20, RB25 Series 1 and RB26 (R32/R33). These are brand new in box I was going to use them on my setup but I need the cash to paint my new bodykit. These are $399 + $25 for postage from Just Jap but they are currently sold out and unavailable. Price - $375 Delivered FIRM - Save yourself $50 and buy a slab of beer and a takeaway! Location - Adelaide Contact - PM or SMS me on 0404998591

Quick Pic will take better pics once I have vacuumed them as in the pic they appear faded due to the 8 months of sitting in my bedroom collecting dust.

I remember seeing these on eBay the pics work on the link below http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=220381717496

Considering selling my Recaro SR3 Seats with genuine Recaro Drivers and Passenger Side Rails to suit R33 R32 Cefiro (would suit S13 with simple adaptors on one corner of each rail). The seats are both black in excellent condition and would come with all needed to fit (bolts, latches etc). As these are reclinable, designed for a 2 door and are genuine along with rails I had no problem driving through regency inspection with them and never had any hassles from the police. I would be looking for $1250 for the pair If interested PM me Location - Adelaide would ship at buyers expense but probably not worth it

Looking for a Greddy Intercooler Core or Greddy Style core where the end tanks taper so the overall length is a little longer then most of the china spec cores floating around. If you have one please pm or sms me on 0404998591 with details or core thickness, price, location etc Thanks in advance for replies