
nigelswazi
Members-
Posts
795 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by nigelswazi
-
Got my straight bolt on high flow for sale due to upgrade. Its a standard skyline turbo bored out to accept the massive Garrett GT30 Ball Bearing core and compressor + turbine wheels. The turbo cost over $2000 from GCG and I also have braided oil feed and coolant return lines to go with it complete with fittings + fitting hose etc for other line + adjustable actuator. The turbo is good for 250-270+rwkw depending on boost level run (16-19psi) and a huge amount of torque. Perfect upgrade for RB20 and RB25 motors. Price - $1350 Location - Adelaide will post at buyers expense Contact - SMS 0404998591 or PM me Pics
-
All tyres are now sold. Only the following left ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Cusco Castor Rods ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Cusco Castor Rods in excellent condition only removed to clear defect and can't be bothered refitting - Price $200 Pics up tomorrow ---------------------------------------------------------------------------------------------------------------------------------------------------- Rays Volk F-Zero Challenge 17's ---------------------------------------------------------------------------------------------------------------------------------------------------- First Set 17x9" + 15 All Round Forged Lightweight Rays Volk F-Zero Challenge Mags + Tyres. These mags are extremely light, not like the usual boat anchors people bolt onto there hubs, and tuff with +15 offset and drastically improve your cars handling. Were fitted to my R33 with just a roll of the rear lip with the current tyres. Fronts have Bridgestone RE030 235/45/17 with plenty of tread and the rears have 500kms old Nankang NS2's. Price - $1200 (same wheels sold for $2000 at JMS a few month ago) Pics up soon of the above wheels they are exactly the same look wise as the pics below except with more aggressive offsets Second Set is 17x9 Rears and 17x8 Fronts with +32 offset from memory with Yokohama Rears and Bridgestone Fronts with plenty of rubber. These mags are in as new condition with no gutter rash at all and have the genuine Rays Centre Caps just not fitted in the pics below Price - $1200 (same wheels sold for $2000 at JMS a few month ago) ---------------------------------------------------------------------------------------------------------------------------------------------------- Contact - SMS 0404998591 or PM me Location - Adelaide but will ship at buyers expense
-
Had a bit more of a clean out and found the following tyres I no longer need: Tech-One Traxxions in 235/40/18 size with 99% tread - Price $150 pair pics below Location - Adelaide Contact - SMS 0404998591 or PM me
-
Looking to buy a pair of rear coilover top plates from R33 R34 Coilovers. Perfect if you have a pair of knackered rear coils strip off the top plates and sell them to me. Im in Adelaide but will buy interstate for the right price Thanks in advance for replies
-
Financial Crisis Garage Cleanout: -------------------------------------------------------------------------------------------------------------------------------------------------- All items in Adelaide will post most at the buyers expense. Please sms 0404998591 or pm me if interested in any of the following ---------------------------------------------------------------------------------------------------------------------------------------------------- 18" Tyres ---------------------------------------------------------------------------------------------------------------------------------------------------- 235/40/18 Tyres with 99% Tread as shown in pics - Price $150 Pair (2 Pairs are for sale identical tread etc) ---------------------------------------------------------------------------------------------------------------------------------------------------- 17" Tyres ---------------------------------------------------------------------------------------------------------------------------------------------------- 225/50/17 Bridgestone Turanza's with plenty of tread as shown in pics - Price $75 pair 215/45/17 Bridgestone RE050's with slight camber wear as shown on pics but enough tread to get you through summer etc - Price $40 pair 225/45/17 Yokohama A048 Super Sticky Semi Slicks, cost $440 each new, with enough rubber to get you through summer outhandling everyone on the road. For those who have never used a semi slick tyre the difference is incredible - Price $75 pair ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Cusco Castor Rods ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Cusco Castor Rods in excellent condition only removed to clear defect and can't be bothered refitting - Price $200 Pics up tomorrow ---------------------------------------------------------------------------------------------------------------------------------------------------- Rays Volk F-Zero Challenge 17's ---------------------------------------------------------------------------------------------------------------------------------------------------- First Set 17x9" + 15 All Round Forged Lightweight Rays Volk F-Zero Challenge Mags + Tyres. These mags are extremely light, not like the usual boat anchors people bolt onto there hubs, and tuff with +15 offset and drastically improve your cars handling. Were fitted to my R33 with just a roll of the rear lip with the current tyres. Fronts have Bridgestone RE030 235/45/17 with plenty of tread and the rears have 500kms old Nankang NS2's. Price - $1200 (same wheels sold for $2000 at JMS a few month ago) Pics up soon of the above wheels they are exactly the same look wise as the pics below except with more aggressive offsets Second Set is 17x9 Rears and 17x8 Fronts with +32 offset from memory with Yokohama Rears and Bridgestone Fronts with plenty of rubber. These mags are in as new condition with no gutter rash at all and have the genuine Rays Centre Caps just not fitted in the pics below Price - $1200 (same wheels sold for $2000 at JMS a few month ago) ---------------------------------------------------------------------------------------------------------------------------------------------------- Contact - SMS 0404998591 or PM me Location - Adelaide but will ship at buyers expense
-
I would contact Ryan at ISC pretty sure he sells coilover springs
-
PM Sent I will take the brakes. Thanks
-
Selling my R33 FMIC Kit which comprises of: ASE FMIC Core usual 600x300 - Quality unit which actually weighs something compared to the brittle china spec cores floating around Custom ASE Stainless Pipe on Hot side Aluminium cold side piping Silicon Joiners, Clamps - Is missing the Silicon Reducer on the LHS This kit will suit cars with the standard plenum will not fit Front Facing Plenum cars without modification. This kit was on my car when making 270rwkw so its an efficient piece of kit. Price - $250 Location - Adelaide will ship at buyers expense but would prefer local pickup Contact - SMS 0404998591 or PM here Pics
-
Location: Adelaide , SA - Contact: - PM or SMS 0404998591 Got the following items that are no longer needed: ---------------------------------------------------------------------------------------------------------------------------------------------------- Grex (Greddy) Oil Cooler Kit to suit RB series motors (should fit CA's too). Kit comes complete with GREX Sandwich plate with in-built thermostat and oil temp sensor (cheaper kits don't have one this helps get instant oil pressure when starting your motor and allows the oil to warm up as per factory to protect your engine). The kit comes with all needed to install including new speedflow braided lines bought from OG Speed Shop and a brand new Greddy Filter. Previously used on a R33 Skyline with the actual GREX cooler core mounting on the drivers side at the front. Price - $550 ---------------------------------------------------------------------------------------------------------------------------------------------------- Z32 AFM Plug complete with clip, loom and installation instuctions for SR, CA and RB powered cars. - Price - $20 ---------------------------------------------------------------------------------------------------------------------------------------------------- R33 Viscous LSD Diff Complete in 4.1 Ratio NON-ABS Housing with 5 bolt half shafts in excellent condition with all ready to bolt in - Price - $300 Now $200 ------------------------------------------------------------------------------------------------------------------------------------------------ Stock R33 Flywheel perfect for those looking for one to do a manual conversion - Price $75 Now $50 ---------------------------------------------------------------------------------------------------------------------------------------------------- R33 Series 2 Centre Console - Price $40 ------------------------------------------------------------------------------------------------------------------------------------------------ R33 Series 2 Drivers Window Switch with surround - Price - $60 ------------------------------------------------------------------------------------------------------------------------------------------------ Pirelli P-Zero Rosso 245/40/18 Tyre with 95% tread no longer have 18" wheels so no need for this tyres which retails for over $400. Price - $75ono Now $50 FIRM Due to a lack of interest on here till recently the tyre was placed on eBay http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=160304290416 ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Castor Rods complete with all nuts and bolts required for fitting. Rods and bushes are in good condition with no sign of leaking from the bushes. Price - NOW SOLD ---------------------------------------------------------------------------------------------------------------------------------------------------- Innovate Motorsports LM-1 Wideband Kit complete with optional RPM Converter Kit to allow mapping of RPM/AFR. Cost over $700 new and used twice still complete in box. Price - NOW SOLD ---------------------------------------------------------------------------------------------------------------------------------------------------- Monza M-Spec Fuel Pressure Regulator complete in box with gauge, hoses & fittings bought from Repco for $150. Price - $75 NOW SOLD ---------------------------------------------------------------------------------------------------------------------------------------------------- Location - Adelaide , SA Contact - PM or SMS 0404998591
-
Nismo R33 Cluster (ultra Rare Mfd Screen)
nigelswazi replied to Chang's topic in For Sale (Private Car Parts and Accessories)
$1000 is a bit steep without the ultra rare Epson computer for it. The computer is rarer than the dash itself as the dashes appears regularly on eBay for ~$400-500 One of those clusters just sold for $450 on eBay from local wrecker http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=180309849728 -
The 34GTR Rims actually increase your track, due to the width/offset, past what is technically classed as legal installed on a GTS/GTS-t only technically legal on a GTR. A mate found out the hard way when he rolled through regency with a set on his R33 GTS-t
-
EXHAUST NOW SOLD POST AMENDED AS BELOW Location: Adelaide , SA - Contact: - PM or SMS 0404998591 Got the following items that are no longer needed: R32/R33 Alloy Intake Pipe complete with silicon hoses connectors, clamps etc - was told it was Greddy when purchased but has no signs of branding. This pipe sounds incredible when spooling and boosting really has to be heard to appreciate makes driving much more fun! A alloy intake pipe is essential for those running more boost than stock as the soft stock rubber hose starts to become a restriction and suck in. The pipe has a BOV return and oil breather ports just like the stock rubber hose but also has a port for a intake air temp sensor (one is currently fitted) perfect for those who wish to monitor intake temps or run a MAP sensor based aftermarket computer like WOLF 3D, Haltech etc. The pipe is tapered gradually expanding from the stock turbo inlet to the AFM size which not only looks tuff but improves induction. Price - $175 Now SOLD ---------------------------------------------------------------------------------------------------------------------------------------------------- Monza M-Spec Fuel Pressure Regulator complete in box with gauge, hoses & fittings bought from Repco for $150. Price - $75 $60 FIRM ---------------------------------------------------------------------------------------------------------------------------------------------------- Pirelli P-Zero Rosso 245/40/18 Tyre with 95% tread no longer have 18" wheels so no need for this tyres which retails for over $400. Price - $75ono Now $50 FIRM ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Castor Rods complete with all nuts and bolts required for fitting. Rods and bushes are in good condition with no sign of leaking from the bushes. Price - $50 pair ---------------------------------------------------------------------------------------------------------------------------------------------------- Innovate Motorsports LM-1 Wideband Kit complete with optional RPM Converter Kit to allow mapping of RPM/AFR. Cost over $700 new and used twice still complete in box. Price - $450 ---------------------------------------------------------------------------------------------------------------------------------------------------- Z32 AFM Plug complete with clip, loom and installation instuctions for SR, CA and RB powered cars. - Price - $20 ---------------------------------------------------------------------------------------------------------------------------------------------------- Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, First up is my Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, will fit R34 with slight shortening and flange flipping round at cat end. This exhaust is extremely high flowing starting with 3" mandrel bend piping up to the flange and at this point the exhaust expands out to 3.5" piping all the way to the tuff cannon muffler with awesome tip. This makes clearance that bit better at the centre of the car for speed bumps etc whilst maintaining maximum flow. I bought this system for $700 from local wreckers but then spent $200 on a new centre muffler as the old one had I small hole I didn't notice upon purchase for which I still have the receipt and warranty on that part. This exhaust is flanged in the centre making transportation a breeze I can undo the flange if required by buyer to make fitting into a normal car easier. Pics are below the black appearance to the lower half of the exhaust is from it being spray matt black so as not to draw attention from the cops I can remove the paint if required but I recommend it. Note silencer is not included in sale this was borrowed to clear defect. Price - $400 Now SOLD ---------------------------------------------------------------------------------------------------------------------------------------------------- R33 Viscous LSD Diff Complete in 4.1 Ratio NON-ABS Housing with 5 bolt half shafts in excellent condition with all ready to bolt in - Price - $200 ------------------------------------------------------------------------------------------------------------------------------------------------ Stock R33 Flywheel perfect for those looking for one to do a manual conversion - Price $75 ---------------------------------------------------------------------------------------------------------------------------------------------------- R33 Series 2 Centre Console - Price $40 ------------------------------------------------------------------------------------------------------------------------------------------------ R33 Series 2 Drivers Window Switch with surround - Price - $60 ------------------------------------------------------------------------------------------------------------------------------------------------ Location - Adelaide , SA Contact - PM or SMS 0404998591
-
Location: Adelaide , SA - Contact: - PM or SMS 0404998591 Got the following items that are no longer needed: R32/R33 Alloy Intake Pipe complete with silicon hoses connectors, clamps etc - was told it was Greddy when purchased but has no signs of branding. This pipe sounds incredible when spooling and boosting really has to be heard to appreciate makes driving much more fun! A alloy intake pipe is essential for those running more boost than stock as the soft stock rubber hose starts to become a restriction and suck in. The pipe has a BOV return and oil breather ports just like the stock rubber hose but also has a port for a intake air temp sensor (one is currently fitted) perfect for those who wish to monitor intake temps or run a MAP sensor based aftermarket computer like WOLF 3D, Haltech etc. The pipe is tapered gradually expanding from the stock turbo inlet to the AFM size which not only looks tuff but improves induction. Price - $175 Now SOLD ---------------------------------------------------------------------------------------------------------------------------------------------------- Monza M-Spec Fuel Pressure Regulator complete in box with gauge, hoses & fittings bought from Repco for $150. Price - $75 $60 FIRM ---------------------------------------------------------------------------------------------------------------------------------------------------- Pirelli P-Zero Rosso 245/40/18 Tyre with 95% tread no longer have 18" wheels so no need for this tyres which retails for over $400. Price - $75ono Now $50 FIRM ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Castor Rods complete with all nuts and bolts required for fitting. Rods and bushes are in good condition with no sign of leaking from the bushes. Price - $50 pair ---------------------------------------------------------------------------------------------------------------------------------------------------- Innovate Motorsports LM-1 Wideband Kit complete with optional RPM Converter Kit to allow mapping of RPM/AFR. Cost over $700 new and used twice still complete in box. Price - $450 ---------------------------------------------------------------------------------------------------------------------------------------------------- Z32 AFM Plug complete with clip, loom and installation instuctions for SR, CA and RB powered cars. - Price - $20 ---------------------------------------------------------------------------------------------------------------------------------------------------- Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, First up is my Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, will fit R34 with slight shortening and flange flipping round at cat end. This exhaust is extremely high flowing starting with 3" mandrel bend piping up to the flange and at this point the exhaust expands out to 3.5" piping all the way to the tuff cannon muffler with awesome tip. This makes clearance that bit better at the centre of the car for speed bumps etc whilst maintaining maximum flow. I bought this system for $700 from local wreckers but then spent $200 on a new centre muffler as the old one had I small hole I didn't notice upon purchase for which I still have the receipt and warranty on that part. This exhaust is flanged in the centre making transportation a breeze I can undo the flange if required by buyer to make fitting into a normal car easier. Pics are below the black appearance to the lower half of the exhaust is from it being spray matt black so as not to draw attention from the cops I can remove the paint if required but I recommend it. Note silencer is not included in sale this was borrowed to clear defect. Price - $400 Now $375 ---------------------------------------------------------------------------------------------------------------------------------------------------- R33 Viscous LSD Diff Complete in 4.1 Ratio NON-ABS Housing with 5 bolt half shafts in excellent condition with all ready to bolt in - Price - $200 ------------------------------------------------------------------------------------------------------------------------------------------------ Stock R33 Flywheel perfect for those looking for one to do a manual conversion - Price $75 ---------------------------------------------------------------------------------------------------------------------------------------------------- R33 Series 2 Centre Console - Price $40 ------------------------------------------------------------------------------------------------------------------------------------------------ R33 Series 2 Drivers Window Switch with surround - Price - $60 ------------------------------------------------------------------------------------------------------------------------------------------------ Location - Adelaide , SA Contact - PM or SMS 0404998591
-
PRICE DROP ON SOME ITEMS AND 18" TYRE ADDED AS BELOW R32/R33 Alloy Intake Pipe complete with silicon hoses connectors, clamps etc - was told it was Greddy when purchased but has no signs of branding. This pipe sounds incredible when spooling and boosting really has to be heard to appreciate makes driving much more fun! A alloy intake pipe is essential for those running more boost than stock as the soft stock rubber hose starts to become a restriction and suck in. The pipe has a BOV return and oil breather ports just like the stock rubber hose but also has a port for a intake air temp sensor (one is currently fitted) perfect for those who wish to monitor intake temps or run a MAP sensor based aftermarket computer like WOLF 3D, Haltech etc. The pipe is tapered gradually expanding from the stock turbo inlet to the AFM size which not only looks tuff but improves induction. Price - $175 Now $160 ---------------------------------------------------------------------------------------------------------------------------------------------------- Monza M-Spec Fuel Pressure Regulator complete in box with gauge, hoses & fittings bought from Repco for $150. Price - $75 $60 FIRM ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Castor Rods complete with all nuts and bolts required for fitting. Rods are in good condition with no sign of leaking from the bushes. Price - $50 pair ---------------------------------------------------------------------------------------------------------------------------------------------------- Pirelli P-Zero Rosso 245/40/18 Tyre with 95% tread no longer have 18" wheels so no need for this tyres which retails for over $400. Price - $75 ---------------------------------------------------------------------------------------------------------------------------------------------------- Innovate Motorsports LM-1 Wideband Kit complete with optional RPM Converter Kit to allow mapping of RPM/AFR. Cost over $700 new and used twice still complete in box. Price - $450 ---------------------------------------------------------------------------------------------------------------------------------------------------- Z32 AFM Plug complete with clip, loom and installation instuctions for SR, CA and RB powered cars. - Price - $20 ---------------------------------------------------------------------------------------------------------------------------------------------------- Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, First up is my Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, will fit R34 with slight shortening and flange flipping round at cat end. This exhaust is extremely high flowing starting with 3" mandrel bend piping up to the flange and at this point the exhaust expands out to 3.5" piping all the way to the tuff cannon muffler with awesome tip. This makes clearance that bit better at the centre of the car for speed bumps etc whilst maintaining maximum flow. I bought this system for $700 from local wreckers but then spent $200 on a new centre muffler as the old one had I small hole I didn't notice upon purchase for which I still have the receipt and warranty on that part. This exhaust is flanged in the centre making transportation a breeze I can undo the flange if required by buyer to make fitting into a normal car easier. Pics are below the black appearance to the lower half of the exhaust is from it being spray matt black so as not to draw attention from the cops I can remove the paint if required but I recommend it. Note silencer is not included in sale this was borrowed to clear defect. Price - $400 ---------------------------------------------------------------------------------------------------------------------------------------------------- R33 Viscous LSD Diff Complete in 4.1 Ratio NON-ABS Housing with 5 bolt half shafts in excellent condition with all ready to bolt in - Price - $200 ---------------------------------------------------------------------------------------------------------------------------------------------------- Location - Adelaide , SA Contact - PM or SMS 0404998591
-
Location: Adelaide , SA - Contact: - PM or SMS 0404998591 Got the following items that are no longer needed: R32/R33 Alloy Intake Pipe complete with silicon hoses connectors, clamps etc - was told it was Greddy when purchased but has no signs of branding. This pipe sounds incredible when spooling and boosting really has to be heard to appreciate makes driving much more fun! A alloy intake pipe is essential for those running more boost than stock as the soft stock rubber hose starts to become a restriction and suck in. The pipe has a BOV return and oil breather ports just like the stock rubber hose but also has a port for a intake air temp sensor (one is currently fitted) perfect for those who wish to monitor intake temps or run a MAP sensor based aftermarket computer like WOLF 3D, Haltech etc. The pipe is tapered gradually expanding from the stock turbo inlet to the AFM size which not only looks tuff but improves induction. Price - $175 ---------------------------------------------------------------------------------------------------------------------------------------------------- Monza M-Spec Fuel Pressure Regulator complete in box with gauge, hoses & fittings bought from Repco for $150. Price - $75 $60 FIRM ---------------------------------------------------------------------------------------------------------------------------------------------------- S14/R33 Castor Rods complete with all nuts and bolts required for fitting. Rods are in good condition with no sign of leaking from the bushes. Price - $50 pair ---------------------------------------------------------------------------------------------------------------------------------------------------- Innovate Motorsports LM-1 Wideband Kit complete with optional RPM Converter Kit to allow mapping of RPM/AFR. Cost over $700 new and used twice still complete in box. Price - $450 ---------------------------------------------------------------------------------------------------------------------------------------------------- Z32 AFM Plug complete with clip, loom and installation instuctions for SR, CA and RB powered cars. - Price - $20 ---------------------------------------------------------------------------------------------------------------------------------------------------- Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, First up is my Japanese Fujitsubo Giken FGK Super High Flow Cat Back System to suit R33 GTS-t, will fit R34 with slight shortening and flange flipping round at cat end. This exhaust is extremely high flowing starting with 3" mandrel bend piping up to the flange and at this point the exhaust expands out to 3.5" piping all the way to the tuff cannon muffler with awesome tip. This makes clearance that bit better at the centre of the car for speed bumps etc whilst maintaining maximum flow. I bought this system for $700 from local wreckers but then spent $200 on a new centre muffler as the old one had I small hole I didn't notice upon purchase for which I still have the receipt and warranty on that part. This exhaust is flanged in the centre making transportation a breeze I can undo the flange if required by buyer to make fitting into a normal car easier. Pics are below the black appearance to the lower half of the exhaust is from it being spray matt black so as not to draw attention from the cops I can remove the paint if required but I recommend it. Note silencer is not included in sale this was borrowed to clear defect. Price - $400 ---------------------------------------------------------------------------------------------------------------------------------------------------- R33 Viscous LSD Diff Complete in 4.1 Ratio NON-ABS Housing with 5 bolt half shafts in excellent condition with all ready to bolt in - Price - $200 ---------------------------------------------------------------------------------------------------------------------------------------------------- Location - Adelaide , SA Contact - PM or SMS 0404998591