Spoolup

ECR33 Nismo 300km Dash cluster $320 email [email protected]

GTR head with valve train, cams and covers $1300 email [email protected]

I have one and one with Greddy BOV ( plumb back ) email me : [email protected]

I have a set of hks ones with 256 and 8.53 to suit - it has a hks adjustable pulley for the ex side email me for pics and details [email protected]

I have one with boost controller, but no commander email me for details [email protected]

I have one with hand controller. email me for details [email protected]

I am working through pm's and emails so will get you all soon. Cheers

Including 3" exhaust, coilovers, 300km dash, complete engine ( loom, ecu, afm etc ) and gearbox, momo wheel and more email [email protected] Brisbane

$2400 for the pair

Brand new GT35R with 0.82 ex housing. $1890 email only : [email protected]

A set of GT2560R's Garret Ball bearing , . 0.6 front and 0.64 rears. These are ball bearing direct bolt on replacement for RB26DETT. They flow 350 Hp each and are brand new, still wrapped in plastic. $2850 for the pair email only. [email protected]

Any news on the GT40R ?

Considering swapping my HR31 Coupe: HR31 Coupe. 396 rwhp blueprinted RB25DET Series 2. Forged pistons, ARP head studs, oringed block, GTR conrods – linished, shotpeened and fitted with ARP bolts, ACL race series bearings. Heavy duty valve springs. GT30/40 BB Garrett turbo, HKS cast iron low mount manifold, Turbonetics external wastegate. 550cc injectors. Q45 AFM, Toda 5 kg chromemoly flywheel with Nismo 3500 lbs pressure plate. Apexi Power FC. Hybrid front mount cooler. Supra 5 spd gearbox conversion. 600hp Bosch in tank fuel pump. 3 inch mandrel exhaust. Profec B boost controller Koni front shocks with King Springs, Bilstein rear coil overs. 17x7 and 17x8 Starfrom wheels with near new tyres. Will consider swapping for a 4 door R32 ,R33 or Cefiro with mods and cash adjustment if necessary. Its too hard getting toddlers in and out of a 2 door coupe..:-) Brisbane only. Email : [email protected]

email me: [email protected] I have a r33 front cut coming

horsepowerinabox.com

Does anyone know who makes or modifies HR31 rear control arms to allow for chamber and toe in adjustment ?

Ok well I am after a GT40R with 0.96 exhaust housing. I can wait approx 8 weeks. Cheers

Cheers, I did look but must have missed it. How do I go about ordering one ? I am after the 0.96 rear housing . When do you expect delivery.

I am looking for a GT40R, can you let me know a price. Regards

I have a complete RB26DETT that has been over heated, so as to its condition I am unsure ? email me if interested ? [email protected]

Mine is IRS and only 235's. So that says alot. Setting up the old style IRS on HR31's to keep reasonable chamber angles under hard acceleration is near impossible.

or just alot of power in a street car :-)

I also have an r31, but built a Rb30/25 for an R33. It had similar power and would also arc up in third and it had 255 rears. If I plant my foot in third gear it will spin into all the way into fourth on a smooth bitumen surface.

I have RB25det with gt30/40 , 0.82 ex housing with external gate, got 395 rwhp on 22 psi. It starts making boost around 2900 rpm and full boost around 3800 rpm. It is extremely drivable and will melt the tyres in third if I go the boot.

interested in wastegate email me : [email protected] will be on the coast on sat, might be able to pick up if we can do a deal