Pops

hippy , the brushes at the top have a bolt , just loosen it off and you can move the brushes in and out . Remember the window is curved so make sure its not too tight when the window is up as this is where it gets tight .

Just wondering if you wrapped it with thermal tape before you put it in ?

dan_the_man Prepsol will get silicon off , not sure about on tinted windows tho , but its used to prep paintwork . I just recently had my door trims off to fix my door locks after having central locking hooked up to the alarm (they left a retaining hook unattached ) . I thought I'd have a look at the clunky windows while it was all off . Once the door trims are off , peel back the plastic so you can see inside the door cavity . I found that adjusting the two top brushes eliminated the wobble in the windows . Also the window was coming down unevenly . There is an adjusting rail right in the middle of the door . It has 2 6mm nuts about 20cm apart u need to undo . Play around with this until you work out the right way to move it to make the window go up and down evenly . Worked for me .

Best thing to do Gianni is email flying finn and finding out about the flanges , the top photo shows no flanges but the other photo's where the prices are show it with flanges .

I had my car dynoed just for fun because it only cost me $40 . Made 130rwkw on a 30 degree + day . Dont know what mode it was in , and the car is stock except for a 3" mandrel bent cat back . Whenever my car "starts feeling slow" , I go take my mums daewoo for a spin . The skyline is heaven on earth after that torture

lol .....maths lesson

I've really got to get myself some redline , this crunching is driving me mental . T0nyGTSt , you should be a salesman mate , after reading your posts I cant resist

Try reading this thread http://www.skylinesaustralia.com/forums/sh...s=&threadid=408

I'm pretty sure the manual says 2.8L for a r33 . I filled my box to till it came out of the filler hole and that took 3.6 L , but after looking in the manual I drained it back to 2.8 L

Grrr I hate conflicting replies Just joking , thanks for the replies .

Thanks Pawley nice info .

Why not split the difference and go 225 all round ?

Does anyone know what the torque setting is for a rb25det , I wanna re-gap my plugs but need to know this first . Thanks in advance .

Thanks BigDatto I'll check it out .

Yes rs73 ugly isnt it , it has to go . Steve , I'll probably go with the heat wrap , just looking into a combined front/dump pipe and 3" cat , probably best to do them at the same time .